cleaning up jtag, jtag430, jtag430x2, jtagarm7tdmi includes

[goodfet] / firmware / include / jtag.h

diff --git a/firmware/include/jtag.h b/firmware/include/jtag.h
index aab18fe..352e044 100644 (file)
--- a/firmware/include/jtag.h
+++ b/firmware/include/jtag.h
@@ -10,12 +10,6 @@
 #include <io.h>
 #include <iomacros.h>
 
-extern unsigned int drwidth;
-
-#define MSP430MODE 0
-#define MSP430XMODE 1
-#define MSP430X2MODE 2
-extern unsigned int jtag430mode;
 
 // Generic Commands
 
@@ -37,31 +31,14 @@ void jtag_stop();
 //! Setup the JTAG pin directions.
 void jtagsetup();
 
-// JTAG430 Commands
-
-//! Start JTAG, unique to the '430.
-void jtag430_start();
-//! Reset the TAP state machine, check the fuse.
-void jtag430_resettap();
-
-//! Defined in jtag430asm.S
-void jtag430_tclk_flashpulses(int);
-
-//High-level Macros follow
-//! Write data to address.
-void jtag430_writemem(unsigned int adr, unsigned int data);
-//! Read data from address
-unsigned int jtag430_readmem(unsigned int adr);
-//! Halt the CPU
-void jtag430_haltcpu();
-//! Release the CPU
-void jtag430_releasecpu();
-//! Set CPU to Instruction Fetch
-void jtag430_setinstrfetch();
-//! Set the program counter.
-void jtag430_setpc(unsigned int adr);
-//! Write data to address.
-void jtag430_writeflash(unsigned int adr, unsigned int data);
+//! Ratchet Clock Down and Up
+void jtag_tcktock();
+//! Go to SHIFT_IR
+void jtag_goto_shift_ir();
+//! Go to SHIFT_DR
+void jtag_goto_shift_dr();
+//! TAP RESET
+void jtag_reset_to_runtest_idle();
 
 //Pins.  Both SPI and JTAG names are acceptable.
 //#define SS   BIT0
@@ -112,44 +89,6 @@ extern int savedtclk;
 //Replace every "CLRTCK SETTCK" with this.
 #define TCKTOCK CLRTCK,SETTCK
 
-
-//16-bit MSP430 JTAG commands, bit-swapped
-//Rewrite these with MSP430 prefix.
-#define IR_CNTRL_SIG_16BIT         0xC8   // 0x13
-#define IR_CNTRL_SIG_CAPTURE       0x28   // 0x14
-#define IR_CNTRL_SIG_RELEASE       0xA8   // 0x15
-// Instructions for the JTAG Fuse
-#define IR_PREPARE_BLOW            0x44   // 0x22
-#define IR_EX_BLOW                 0x24   // 0x24
-// Instructions for the JTAG data register
-#define IR_DATA_16BIT              0x82   // 0x41
-#define IR_DATA_QUICK              0xC2   // 0x43
-// Instructions for the JTAG PSA mode
-#define IR_DATA_PSA                0x22   // 0x44
-#define IR_SHIFT_OUT_PSA           0x62   // 0x46
-// Instructions for the JTAG address register
-#define IR_ADDR_16BIT              0xC1   // 0x83
-#define IR_ADDR_CAPTURE            0x21   // 0x84
-#define IR_DATA_TO_ADDR            0xA1   // 0x85
-// Bypass instruction
-#define IR_BYPASS                  0xFF   // 0xFF
-
-//MSP430X2 unique
-#define IR_COREIP_ID               0xE8   // 0x17 
-#define IR_DEVICE_ID               0xE1   // 0x87
-
-//MSP430 or MSP430X
-#define MSP430JTAGID 0x89
-//MSP430X2 only
-#define MSP430X2JTAGID 0x91
-
-//! Syncs a POR.
-unsigned int jtag430x2_syncpor();
-//! Executes an MSP430X2 POR
-unsigned int jtag430x2_por();
-//! Power-On Reset
-void jtag430_por();
-
 //JTAG commands
 #define JTAG_IR_SHIFT 0x80
 #define JTAG_DR_SHIFT 0x81
@@ -162,6 +101,6 @@ void jtag430_por();
 
 
 //JTAG430 commands
-#include "jtag430.h"
+//#include "jtag430.h"
 
 #endif