void msp430_init_uart(){
- // Serial on P3.4, P3.5
+ // Serial on P3.4, P3.5
P3SEL |= BIT4 + BIT5;
P3DIR |= BIT4;
- //UCA0CTL1 |= UCSWRST; /* disable UART */
+ //UCA0CTL1 |= UCSWRST; /* disable UART */
UCA0CTL0 = 0x00;
- //UCA0CTL0 |= UCMSB ;
- UCA0CTL1 |= UCSSEL_2; // SMCLK
+ //UCA0CTL0 |= UCMSB ;
- //UCA0BR0 = BAUD0EN; // 115200
+ UCA0CTL1 |= UCSSEL_2; // SMCLK
+
+ //UCA0BR0 = BAUD0EN; // 115200
//UCA0BR1 = BAUD1EN;
setbaud(5);//default baud, 115200
- UCA0MCTL = 0; // Modulation UCBRSx = 5
- UCA0CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
-
+ UCA0MCTL = 0; // Modulation UCBRSx = 5
+ UCA0CTL1 &= ~UCSWRST; // **Initialize USCI state machine**
- //Leave this commented!
- //Interrupt is handled by target code, not by bootloader.
- //IE2 |= UCA0RXIE;
+ //Leave this commented!
+ //Interrupt is handled by target code, not by bootloader.
+ //IE2 |= UCA0RXIE;
}
//! Initialize the MSP430 clock.