Moved board definition from apimote to apimote1 for versioning support.

[goodfet] / firmware / platforms / apimote1.h

diff --git a/firmware/platforms/apimote1.h b/firmware/platforms/apimote1.h
new file mode 100755 (executable)
index 0000000..082947a
--- /dev/null
+++ b/firmware/platforms/apimote1.h
@@ -0,0 +1,94 @@
+/*! \file apimote.h\r
+  \author Ryan Speers\r
+  \brief Port descriptions for the GoodFET platform.\r
+*/\r
+\r
+/* #ifdef __MSPGCC__ */\r
+/* #include <msp430.h> */\r
+/* #else */\r
+/* #include <signal.h> */\r
+/* #include <msp430.h> */\r
+/* #include <iomacros.h> */\r
+/* #endif */\r
+\r
+#ifndef _GNU_ASSEMBLER_\r
+#include <msp430.h>\r
+#endif\r
+\r
+//LED on P5.5 (pin 49) (LED1 red)\r
+#define PLEDOUT P5OUT\r
+#define PLEDDIR P5DIR\r
+#define PLEDPIN BIT5\r
+//LED on P5.6 (pin 50) (LED2 green)\r
+#define PLED2OUT P5OUT\r
+#define PLED2DIR P5DIR\r
+#define PLED2PIN BIT6\r
+//LED on P5.7 (pin 51) (LED3 blue)\r
+#define PLED3OUT P5OUT\r
+#define PLED3DIR P5DIR\r
+#define PLED3PIN BIT7\r
+\r
+//mtx frx p34 \r
+//mrx ftx p35\r
+\r
+//SPI\r
+//TelosB:  29/3.1=RF_SI, 30/3.2=RF_SO, 31/3.3=RF_SCLK\r
+//ApiMote: 29/3.1=RF_SI, 30/3.2=RF_SO, 31/3.3=RF_SCLK\r
+#define SPIOUT P3OUT\r
+#define SPIDIR P3DIR\r
+#define SPIIN  P3IN\r
+#define SPIREN P3REN\r
+\r
+/* For the radio to be used:\r
+   2.7 (!RST) must be low\r
+   2.0 (VREF_EN) must be high (cc2420-41 rf_vreg)\r
+   3.0 (!CS) must be low for the transaction.\r
+*/\r
+\r
+\r
+/* TODO what to do here?.  Hopefully nothing.\r
+#define INITPLATFORM \\r
+  P1DIR = 0xe0;\\r
+  P1OUT = 0x00;\\r
+  P2DIR = 0x7b;\\r
+  P2OUT = 0x10;\\r
+  P3DIR = 0xf1;\\r
+  P3OUT = 0x00;\\r
+  P4DIR = 0xfd;\\r
+  P4OUT = 0xFd;\\r
+  P5DIR = 0xff;\\r
+  P5OUT = 0xff;\\r
+  P6DIR = 0xff;\\r
+  P6OUT = 0x00;\r
+*/\r
+\r
+//RF Control\r
+//TelosB:  Radio CS is 38/P4.2 (to CC2420 pin31)\r
+//ApiMote: Radio CS is 28/P3.0\r
+#define SETSS P3OUT|=BIT0\r
+#define CLRSS P3OUT&=~BIT0\r
+#define DIRSS P3DIR|=BIT0\r
+\r
+//CC2420 Chip Enable\r
+//TelosB:  Radio RESETn is 42/P4.6 (to CC2420 pin21)\r
+//ApiMote: Radio RESETn is 27/P2.7 (to CC2420 pin21)\r
+#define SETCE P2OUT|=BIT7\r
+#define CLRCE P2OUT&=~BIT7\r
+#define DIRCE P2DIR|=BIT7\r
+\r
+//CC2420 signals\r
+#define SFD   (P2IN&BIT6) //TelosB 37/P4.1 -> ApiMote 26/P2.6\r
+#define FIFOP (P2IN&BIT4) //TelosB 12/P1.0 -> ApiMote 24/P2.4 (rf_pkt cc2420-29)\r
+#define FIFO  (P2IN&BIT3) //TelosB 15/P1.3 -> ApiMote 23/P2.3 (rf_gio0 cc2420-30)\r
+\r
+// network byte order converters\r
+#define htons(x) ((((uint16_t)(x) & 0xFF00) >> 8) | \\r
+                                (((uint16_t)(x) & 0x00FF) << 8))\r
+#define htonl(x) ((((uint32_t)(x) & 0xFF000000) >> 24) | \\r
+                                 (((uint32_t)(x) & 0x00FF0000) >> 8) | \\r
+                                 (((uint32_t)(x) & 0x0000FF00) << 8) | \\r
+                                 (((uint32_t)(x) & 0x000000FF) << 24))\r
+\r
+#define ntohs htons\r
+#define ntohl htonl\r
+\r