--- /dev/null
+/*
+ * Copyright 2010 Michael Ossmann
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <cc1110.h>
+#include "ioCCxx10_bitdef.h"
+#include "specan.h"
+
+/* globals */
+__xdata channel_info chan_table[NUM_CHANNELS];
+u16 center_freq;
+u16 user_freq;
+u8 band;
+u8 width;
+__bit max_hold;
+__bit height;
+__bit sleepy;
+u8 vscroll;
+u8 min_chan;
+u8 max_chan;
+
+
+void sleepMillis(int ms) {
+ int j;
+ //k=1000;
+ //while(--k>0)
+ while (--ms > 0) {
+ for (j=0; j<1200;j++); // about 1 millisecond
+ };
+}
+
+
+void radio_setup() {
+ /* IF of 457.031 kHz */
+ FSCTRL1 = 0x12;
+ FSCTRL0 = 0x00;
+
+ /* disable 3 highest DVGA settings */
+ AGCCTRL2 |= AGCCTRL2_MAX_DVGA_GAIN;
+
+ /* frequency synthesizer calibration */
+ FSCAL3 = 0xEA;
+ FSCAL2 = 0x2A;
+ FSCAL1 = 0x00;
+ FSCAL0 = 0x1F;
+
+ /* "various test settings" */
+ TEST2 = 0x88;
+ TEST1 = 0x31;
+ TEST0 = 0x09;
+
+ /* no automatic frequency calibration */
+ MCSM0 = 0;
+}
+
+/* set the channel bandwidth */
+void set_filter() {
+ /* channel spacing should fit within 80% of channel filter bandwidth */
+ switch (width) {
+ case NARROW:
+ MDMCFG4 = 0xEC; /* 67.708333 kHz */
+ break;
+ case ULTRAWIDE:
+ MDMCFG4 = 0x0C; /* 812.5 kHz */
+ break;
+ default:
+ MDMCFG4 = 0x6C; /* 270.833333 kHz */
+ break;
+ }
+}
+
+/* set the radio frequency in Hz */
+void set_radio_freq(u32 freq) {
+ /* the frequency setting is in units of 396.728515625 Hz */
+ u32 setting = (u32) (freq * .0025206154);
+ FREQ2 = (setting >> 16) & 0xff;
+ FREQ1 = (setting >> 8) & 0xff;
+ FREQ0 = setting & 0xff;
+
+ if ((band == BAND_300 && freq < MID_300) ||
+ (band == BAND_400 && freq < MID_400) ||
+ (band == BAND_900 && freq < MID_900))
+ /* select low VCO */
+ FSCAL2 = 0x0A;
+ else
+ /* select high VCO */
+ FSCAL2 = 0x2A;
+}
+
+/* freq in Hz */
+void calibrate_freq(u32 freq, u8 ch) {
+ set_radio_freq(freq);
+
+ RFST = RFST_SCAL;
+ RFST = RFST_SRX;
+
+ /* wait for calibration */
+ sleepMillis(2);
+
+ /* store frequency/calibration settings */
+ chan_table[ch].freq2 = FREQ2;
+ chan_table[ch].freq1 = FREQ1;
+ chan_table[ch].freq0 = FREQ0;
+ chan_table[ch].fscal3 = FSCAL3;
+ chan_table[ch].fscal2 = FSCAL2;
+ chan_table[ch].fscal1 = FSCAL1;
+
+ /* get initial RSSI measurement */
+ chan_table[ch].ss = (RSSI ^ 0x80);
+ chan_table[ch].max = 0;
+
+ RFST = RFST_SIDLE;
+}
+
+#define UPPER(a, b, c) ((((a) - (b) + ((c) / 2)) / (c)) * (c))
+#define LOWER(a, b, c) ((((a) + (b)) / (c)) * (c))
+
+/* set the center frequency in MHz */
+u16 set_center_freq(u16 freq) {
+ u8 new_band;
+ u32 spacing;
+ u32 hz;
+ u32 min_hz;
+ u32 max_hz;
+ u8 margin;
+ u8 step;
+ u16 upper_limit;
+ u16 lower_limit;
+ u16 next_up;
+ u16 next_down;
+ u8 next_band_up;
+ u8 next_band_down;
+
+ switch (width) {
+ case NARROW:
+ margin = NARROW_MARGIN;
+ step = NARROW_STEP;
+ spacing = NARROW_SPACING;
+ break;
+ case ULTRAWIDE:
+ margin = ULTRAWIDE_MARGIN;
+ step = ULTRAWIDE_STEP;
+ spacing = ULTRAWIDE_SPACING;
+
+ /* nearest 20 MHz step */
+ freq = ((freq + 10) / 20) * 20;
+ break;
+ default:
+ margin = WIDE_MARGIN;
+ step = WIDE_STEP;
+ spacing = WIDE_SPACING;
+
+ /* nearest 5 MHz step */
+ freq = ((freq + 2) / 5) * 5;
+ break;
+ }
+
+ /* handle cases near edges of bands */
+ if (freq > EDGE_900) {
+ new_band = BAND_900;
+ upper_limit = UPPER(MAX_900, margin, step);
+ lower_limit = LOWER(MIN_900, margin, step);
+ next_up = LOWER(MIN_300, margin, step);
+ next_down = UPPER(MAX_400, margin, step);
+ next_band_up = BAND_300;
+ next_band_down = BAND_400;
+ } else if (freq > EDGE_400) {
+ new_band = BAND_400;
+ upper_limit = UPPER(MAX_400, margin, step);
+ lower_limit = LOWER(MIN_400, margin, step);
+ next_up = LOWER(MIN_900, margin, step);
+ next_down = UPPER(MAX_300, margin, step);
+ next_band_up = BAND_900;
+ next_band_down = BAND_300;
+ } else {
+ new_band = BAND_300;
+ upper_limit = UPPER(MAX_300, margin, step);
+ lower_limit = LOWER(MIN_300, margin, step);
+ next_up = LOWER(MIN_400, margin, step);
+ next_down = UPPER(MAX_900, margin, step);
+ next_band_up = BAND_400;
+ next_band_down = BAND_900;
+ }
+
+ if (freq > upper_limit) {
+ freq = upper_limit;
+ if (new_band == band) {
+ new_band = next_band_up;
+ freq = next_up;
+ }
+ } else if (freq < lower_limit) {
+ freq = lower_limit;
+ if (new_band == band) {
+ new_band = next_band_down;
+ freq = next_down;
+ }
+ }
+
+ band = new_band;
+
+ /* doing everything in Hz from here on */
+ switch (band) {
+ case BAND_400:
+ min_hz = MIN_400 * 1000000;
+ max_hz = MAX_400 * 1000000;
+ break;
+ case BAND_300:
+ min_hz = MIN_300 * 1000000;
+ max_hz = MAX_300 * 1000000;
+ break;
+ default:
+ min_hz = MIN_900 * 1000000;
+ max_hz = MAX_900 * 1000000;
+ break;
+ }
+
+ /* calibrate upper channels */
+ hz = freq * 1000000;
+ max_chan = NUM_CHANNELS / 2;
+ while (hz <= max_hz && max_chan < NUM_CHANNELS) {
+ calibrate_freq(hz, max_chan);
+ hz += spacing;
+ max_chan++;
+ }
+
+ /* calibrate lower channels */
+ hz = freq * 1000000 - spacing;
+ min_chan = NUM_CHANNELS / 2;
+ while (hz >= min_hz && min_chan > 0) {
+ min_chan--;
+ calibrate_freq(hz, min_chan);
+ hz -= spacing;
+ }
+
+ center_freq = freq;
+ max_hold = 0;
+
+ return freq;
+}
+
+/* tune the radio using stored calibration */
+void tune(u8 ch) {
+ FREQ2 = chan_table[ch].freq2;
+ FREQ1 = chan_table[ch].freq1;
+ FREQ0 = chan_table[ch].freq0;
+
+ FSCAL3 = chan_table[ch].fscal3;
+ FSCAL2 = chan_table[ch].fscal2;
+ FSCAL1 = chan_table[ch].fscal1;
+}
+
+void set_width(u8 w) {
+ width = w;
+ set_filter();
+ set_center_freq(center_freq);
+}
+
+void poll_keyboard() {
+ /*
+ u8 vstep;
+ u8 hstep;
+
+ vstep = (height == TALL) ? TALL_STEP : SHORT_STEP;
+
+ switch (width) {
+ case NARROW:
+ hstep = NARROW_STEP;
+ break;
+ case ULTRAWIDE:
+ hstep = ULTRAWIDE_STEP;
+ break;
+ default:
+ hstep = WIDE_STEP;
+ break;
+ }
+
+ switch (getkey()) {
+ case 'W':
+ set_width(WIDE);
+ break;
+ case 'N':
+ set_width(NARROW);
+ break;
+ case 'U':
+ set_width(ULTRAWIDE);
+ break;
+ case KMNU:
+ switch (width) {
+ case WIDE:
+ set_width(NARROW);
+ break;
+ case NARROW:
+ set_width(ULTRAWIDE);
+ break;
+ default:
+ set_width(WIDE);
+ break;
+ }
+ break;
+ case 'T':
+ height = TALL;
+ break;
+ case 'S':
+ height = SHORT;
+ break;
+ case KBYE:
+ height = !height;
+ break;
+ case '>':
+ user_freq += hstep;
+ break;
+ case '<':
+ user_freq -= hstep;
+ break;
+ case '^':
+ case 'Q':
+ vscroll = MIN(vscroll + vstep, MAX_VSCROLL);
+ break;
+ case KDWN:
+ case 'A':
+ vscroll = MAX(vscroll - vstep, MIN_VSCROLL);
+ break;
+ case 'M':
+ max_hold = !max_hold;
+ break;
+ case KPWR:
+ sleepy = 1;
+ break;
+ default:
+ break;
+ }
+ */
+}
+
+void main(void) {
+ u8 ch;
+ u16 i;
+
+reset:
+ center_freq = DEFAULT_FREQ;
+ user_freq = DEFAULT_FREQ;
+ band = BAND_900;
+ width = WIDE;
+ max_hold = 0;
+ height = 0;
+ sleepy = 0;
+ vscroll = 0;
+ min_chan = 0;
+ max_chan = NUM_CHANNELS - 1;
+
+ //presumed to be done by GoodFET.
+ //xtalClock();
+ //setIOPorts();
+ radio_setup();
+ set_width(WIDE);
+
+ while (1) {
+ for (ch = min_chan; ch < max_chan; ch++) {
+ /* tune radio and start RX */
+ tune(ch);
+ RFST = RFST_SRX;
+
+ /* delay while waiting for RSSI measurement */
+ sleepMillis(10);
+
+ /* measurement needs a bit more time in narrow mode */
+ if (width == NARROW)
+ for (i = 350; i-- ;);
+
+ /* read RSSI */
+ chan_table[ch].ss = (RSSI ^ 0x80);
+ if (max_hold)
+ chan_table[ch].max = MAX(chan_table[ch].ss,
+ chan_table[ch].max);
+ else
+ chan_table[ch].max = 0;
+
+ /* end RX */
+ RFST = RFST_SIDLE;
+ }
+
+ poll_keyboard();
+
+
+ if (user_freq != center_freq)
+ user_freq = set_center_freq(user_freq);
+ }
+}