X-Git-Url: http://git.rot13.org//?p=goodfet;a=blobdiff_plain;f=firmware%2Flib%2Fmsp430x2618.c;fp=firmware%2Flib%2Fmsp430x2618.c;h=9409f56995ba33d6091743f14264eece0c253ec3;hp=7823f06c8e8cb6961745f38e1c94cfa896f23fa0;hb=ed7afb6af8b3831d61a8ef6cba7592f17592af72;hpb=20658f822c6d5db80be777411a591dafc278539f

diff --git a/firmware/lib/msp430x2618.c b/firmware/lib/msp430x2618.c
index 7823f06..9409f56 100644
--- a/firmware/lib/msp430x2618.c
+++ b/firmware/lib/msp430x2618.c
@@ -102,28 +102,28 @@ void setbaud1(unsigned char rate){
 
 void msp430_init_uart(){
 
-  // Serial on P3.4, P3.5                                                                                                                                                 
+  // Serial on P3.4, P3.5
   P3SEL |= BIT4 + BIT5;
   P3DIR |= BIT4;
 
-  //UCA0CTL1 |= UCSWRST;                    /* disable UART */                                                                                                            
+  //UCA0CTL1 |= UCSWRST;                    /* disable UART */
 
   UCA0CTL0 = 0x00;
-  //UCA0CTL0 |= UCMSB ;                                                                                                                                                   
-  UCA0CTL1 |= UCSSEL_2;                     // SMCLK                                                                                                                      
+  //UCA0CTL0 |= UCMSB ;
 
-  //UCA0BR0 = BAUD0EN;                        // 115200                                                                                                                     
+  UCA0CTL1 |= UCSSEL_2;                     // SMCLK
+
+  //UCA0BR0 = BAUD0EN;                        // 115200
   //UCA0BR1 = BAUD1EN;
   setbaud(5);//default baud, 115200
 
-  UCA0MCTL = 0;                             // Modulation UCBRSx = 5                                                                                                      
-  UCA0CTL1 &= ~UCSWRST;                     // **Initialize USCI state machine**                                                                                          
-
+  UCA0MCTL = 0;                             // Modulation UCBRSx = 5
+  UCA0CTL1 &= ~UCSWRST;                     // **Initialize USCI state machine**
 
-  //Leave this commented!                                                                                                                                                 
-  //Interrupt is handled by target code, not by bootloader.                                                                                                               
-  //IE2 |= UCA0RXIE;         
 
+  //Leave this commented!
+  //Interrupt is handled by target code, not by bootloader.
+  //IE2 |= UCA0RXIE;
 }
 
 //! Initialize the MSP430 clock.