arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/config.h>
  22 #include <linux/init.h>
  23 #include <linux/device.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/sysdev.h>
  26 #include <linux/interrupt.h>
  27
  28 #include <asm/system.h>
  29 #include <asm/hardware.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32 #include <asm/leds.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/hardware/amba.h>
  35 #include <asm/hardware/amba_clcd.h>
  36 #include <asm/hardware/arm_timer.h>
  37 #include <asm/hardware/icst307.h>
  38
  39 #include <asm/mach/arch.h>
  40 #include <asm/mach/flash.h>
  41 #include <asm/mach/irq.h>
  42 #include <asm/mach/time.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/mmc.h>
  45
  46 #include "core.h"
  47 #include "clock.h"
  48
  49 /*
  50  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  51  * is the (PA >> 12).
  52  *
  53  * Setup a VA for the Versatile Vectored Interrupt Controller.
  54  */
  55 #define __io_address(n)         __io(IO_ADDRESS(n))
  56 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
  57 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
  58
  59 static void vic_mask_irq(unsigned int irq)
  60 {
  61         irq -= IRQ_VIC_START;
  62         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
  63 }
  64
  65 static void vic_unmask_irq(unsigned int irq)
  66 {
  67         irq -= IRQ_VIC_START;
  68         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
  69 }
  70
  71 static struct irqchip vic_chip = {
  72         .ack    = vic_mask_irq,
  73         .mask   = vic_mask_irq,
  74         .unmask = vic_unmask_irq,
  75 };
  76
  77 static void sic_mask_irq(unsigned int irq)
  78 {
  79         irq -= IRQ_SIC_START;
  80         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
  81 }
  82
  83 static void sic_unmask_irq(unsigned int irq)
  84 {
  85         irq -= IRQ_SIC_START;
  86         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
  87 }
  88
  89 static struct irqchip sic_chip = {
  90         .ack    = sic_mask_irq,
  91         .mask   = sic_mask_irq,
  92         .unmask = sic_unmask_irq,
  93 };
  94
  95 static void
  96 sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  97 {
  98         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
  99
 100         if (status == 0) {
 101                 do_bad_IRQ(irq, desc, regs);
 102                 return;
 103         }
 104
 105         do {
 106                 irq = ffs(status) - 1;
 107                 status &= ~(1 << irq);
 108
 109                 irq += IRQ_SIC_START;
 110
 111                 desc = irq_desc + irq;
 112                 desc_handle_irq(irq, desc, regs);
 113         } while (status);
 114 }
 115
 116 #if 1
 117 #define IRQ_MMCI0A      IRQ_VICSOURCE22
 118 #define IRQ_AACI        IRQ_VICSOURCE24
 119 #define IRQ_ETH         IRQ_VICSOURCE25
 120 #define PIC_MASK        0xFFD00000
 121 #else
 122 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
 123 #define IRQ_AACI        IRQ_SIC_AACI
 124 #define IRQ_ETH         IRQ_SIC_ETH
 125 #define PIC_MASK        0
 126 #endif
 127
 128 void __init versatile_init_irq(void)
 129 {
 130         unsigned int i, value;
 131
 132         /* Disable all interrupts initially. */
 133
 134         writel(0, VA_VIC_BASE + VIC_INT_SELECT);
 135         writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
 136         writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
 137         writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
 138         writel(0, VA_VIC_BASE + VIC_ITCR);
 139         writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
 140
 141         /*
 142          * Make sure we clear all existing interrupts
 143          */
 144         writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
 145         for (i = 0; i < 19; i++) {
 146                 value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
 147                 writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
 148         }
 149
 150         for (i = 0; i < 16; i++) {
 151                 value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 152                 writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 153         }
 154
 155         writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
 156
 157         for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
 158                 if (i != IRQ_VICSOURCE31) {
 159                         set_irq_chip(i, &vic_chip);
 160                         set_irq_handler(i, do_level_IRQ);
 161                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 162                 }
 163         }
 164
 165         set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
 166         vic_unmask_irq(IRQ_VICSOURCE31);
 167
 168         /* Do second interrupt controller */
 169         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 170
 171         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
 172                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
 173                         set_irq_chip(i, &sic_chip);
 174                         set_irq_handler(i, do_level_IRQ);
 175                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 176                 }
 177         }
 178
 179         /*
 180          * Interrupts on secondary controller from 0 to 8 are routed to
 181          * source 31 on PIC.
 182          * Interrupts from 21 to 31 are routed directly to the VIC on
 183          * the corresponding number on primary controller. This is controlled
 184          * by setting PIC_ENABLEx.
 185          */
 186         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 187 }
 188
 189 static struct map_desc versatile_io_desc[] __initdata = {
 190  { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
 191  { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
 192  { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
 193  { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
 194 #ifdef CONFIG_MACH_VERSATILE_AB
 195  { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
 196  { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
 197 #endif
 198 #ifdef CONFIG_DEBUG_LL
 199  { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
 200 #endif
 201 #ifdef CONFIG_PCI
 202  { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
 203  { VERSATILE_PCI_VIRT_BASE,          VERSATILE_PCI_BASE,   VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
 204  { VERSATILE_PCI_CFG_VIRT_BASE,      VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
 205 #if 0
 206  { VERSATILE_PCI_VIRT_MEM_BASE0,     VERSATILE_PCI_MEM_BASE0, SZ_16M,  MT_DEVICE },
 207  { VERSATILE_PCI_VIRT_MEM_BASE1,     VERSATILE_PCI_MEM_BASE1, SZ_16M,  MT_DEVICE },
 208  { VERSATILE_PCI_VIRT_MEM_BASE2,     VERSATILE_PCI_MEM_BASE2, SZ_16M,  MT_DEVICE },
 209 #endif
 210 #endif
 211 };
 212
 213 void __init versatile_map_io(void)
 214 {
 215         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 216 }
 217
 218 #define VERSATILE_REFCOUNTER    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 219
 220 /*
 221  * This is the Versatile sched_clock implementation.  This has
 222  * a resolution of 41.7ns, and a maximum value of about 179s.
 223  */
 224 unsigned long long sched_clock(void)
 225 {
 226         unsigned long long v;
 227
 228         v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
 229         do_div(v, 3);
 230
 231         return v;
 232 }
 233
 234
 235 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 236
 237 static int versatile_flash_init(void)
 238 {
 239         u32 val;
 240
 241         val = __raw_readl(VERSATILE_FLASHCTRL);
 242         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 243         __raw_writel(val, VERSATILE_FLASHCTRL);
 244
 245         return 0;
 246 }
 247
 248 static void versatile_flash_exit(void)
 249 {
 250         u32 val;
 251
 252         val = __raw_readl(VERSATILE_FLASHCTRL);
 253         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 254         __raw_writel(val, VERSATILE_FLASHCTRL);
 255 }
 256
 257 static void versatile_flash_set_vpp(int on)
 258 {
 259         u32 val;
 260
 261         val = __raw_readl(VERSATILE_FLASHCTRL);
 262         if (on)
 263                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 264         else
 265                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 266         __raw_writel(val, VERSATILE_FLASHCTRL);
 267 }
 268
 269 static struct flash_platform_data versatile_flash_data = {
 270         .map_name               = "cfi_probe",
 271         .width                  = 4,
 272         .init                   = versatile_flash_init,
 273         .exit                   = versatile_flash_exit,
 274         .set_vpp                = versatile_flash_set_vpp,
 275 };
 276
 277 static struct resource versatile_flash_resource = {
 278         .start                  = VERSATILE_FLASH_BASE,
 279         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
 280         .flags                  = IORESOURCE_MEM,
 281 };
 282
 283 static struct platform_device versatile_flash_device = {
 284         .name                   = "armflash",
 285         .id                     = 0,
 286         .dev                    = {
 287                 .platform_data  = &versatile_flash_data,
 288         },
 289         .num_resources          = 1,
 290         .resource               = &versatile_flash_resource,
 291 };
 292
 293 static struct resource smc91x_resources[] = {
 294         [0] = {
 295                 .start          = VERSATILE_ETH_BASE,
 296                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 297                 .flags          = IORESOURCE_MEM,
 298         },
 299         [1] = {
 300                 .start          = IRQ_ETH,
 301                 .end            = IRQ_ETH,
 302                 .flags          = IORESOURCE_IRQ,
 303         },
 304 };
 305
 306 static struct platform_device smc91x_device = {
 307         .name           = "smc91x",
 308         .id             = 0,
 309         .num_resources  = ARRAY_SIZE(smc91x_resources),
 310         .resource       = smc91x_resources,
 311 };
 312
 313 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 314
 315 unsigned int mmc_status(struct device *dev)
 316 {
 317         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 318         u32 mask;
 319
 320         if (adev->res.start == VERSATILE_MMCI0_BASE)
 321                 mask = 1;
 322         else
 323                 mask = 2;
 324
 325         return readl(VERSATILE_SYSMCI) & mask;
 326 }
 327
 328 static struct mmc_platform_data mmc0_plat_data = {
 329         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 330         .status         = mmc_status,
 331 };
 332
 333 /*
 334  * Clock handling
 335  */
 336 static const struct icst307_params versatile_oscvco_params = {
 337         .ref            = 24000,
 338         .vco_max        = 200000,
 339         .vd_min         = 4 + 8,
 340         .vd_max         = 511 + 8,
 341         .rd_min         = 1 + 2,
 342         .rd_max         = 127 + 2,
 343 };
 344
 345 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 346 {
 347         void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 348 #if defined(CONFIG_ARCH_VERSATILE_PB)
 349         void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
 350 #elif defined(CONFIG_MACH_VERSATILE_AB)
 351         void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
 352 #endif
 353         u32 val;
 354
 355         val = readl(sys_osc) & ~0x7ffff;
 356         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 357
 358         writel(0xa05f, sys_lock);
 359         writel(val, sys_osc);
 360         writel(0, sys_lock);
 361 }
 362
 363 static struct clk versatile_clcd_clk = {
 364         .name   = "CLCDCLK",
 365         .params = &versatile_oscvco_params,
 366         .setvco = versatile_oscvco_set,
 367 };
 368
 369 /*
 370  * CLCD support.
 371  */
 372 #define SYS_CLCD_MODE_MASK      (3 << 0)
 373 #define SYS_CLCD_MODE_888       (0 << 0)
 374 #define SYS_CLCD_MODE_5551      (1 << 0)
 375 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 376 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 377 #define SYS_CLCD_NLCDIOON       (1 << 2)
 378 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 379 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 380 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 381 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 382 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 383 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 384 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 385 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 386
 387 static struct clcd_panel vga = {
 388         .mode           = {
 389                 .name           = "VGA",
 390                 .refresh        = 60,
 391                 .xres           = 640,
 392                 .yres           = 480,
 393                 .pixclock       = 39721,
 394                 .left_margin    = 40,
 395                 .right_margin   = 24,
 396                 .upper_margin   = 32,
 397                 .lower_margin   = 11,
 398                 .hsync_len      = 96,
 399                 .vsync_len      = 2,
 400                 .sync           = 0,
 401                 .vmode          = FB_VMODE_NONINTERLACED,
 402         },
 403         .width          = -1,
 404         .height         = -1,
 405         .tim2           = TIM2_BCD | TIM2_IPC,
 406         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 407         .bpp            = 16,
 408 };
 409
 410 static struct clcd_panel sanyo_3_8_in = {
 411         .mode           = {
 412                 .name           = "Sanyo QVGA",
 413                 .refresh        = 116,
 414                 .xres           = 320,
 415                 .yres           = 240,
 416                 .pixclock       = 100000,
 417                 .left_margin    = 6,
 418                 .right_margin   = 6,
 419                 .upper_margin   = 5,
 420                 .lower_margin   = 5,
 421                 .hsync_len      = 6,
 422                 .vsync_len      = 6,
 423                 .sync           = 0,
 424                 .vmode          = FB_VMODE_NONINTERLACED,
 425         },
 426         .width          = -1,
 427         .height         = -1,
 428         .tim2           = TIM2_BCD,
 429         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 430         .bpp            = 16,
 431 };
 432
 433 static struct clcd_panel sanyo_2_5_in = {
 434         .mode           = {
 435                 .name           = "Sanyo QVGA Portrait",
 436                 .refresh        = 116,
 437                 .xres           = 240,
 438                 .yres           = 320,
 439                 .pixclock       = 100000,
 440                 .left_margin    = 20,
 441                 .right_margin   = 10,
 442                 .upper_margin   = 2,
 443                 .lower_margin   = 2,
 444                 .hsync_len      = 10,
 445                 .vsync_len      = 2,
 446                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 447                 .vmode          = FB_VMODE_NONINTERLACED,
 448         },
 449         .width          = -1,
 450         .height         = -1,
 451         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 452         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 453         .bpp            = 16,
 454 };
 455
 456 static struct clcd_panel epson_2_2_in = {
 457         .mode           = {
 458                 .name           = "Epson QCIF",
 459                 .refresh        = 390,
 460                 .xres           = 176,
 461                 .yres           = 220,
 462                 .pixclock       = 62500,
 463                 .left_margin    = 3,
 464                 .right_margin   = 2,
 465                 .upper_margin   = 1,
 466                 .lower_margin   = 0,
 467                 .hsync_len      = 3,
 468                 .vsync_len      = 2,
 469                 .sync           = 0,
 470                 .vmode          = FB_VMODE_NONINTERLACED,
 471         },
 472         .width          = -1,
 473         .height         = -1,
 474         .tim2           = TIM2_BCD | TIM2_IPC,
 475         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 476         .bpp            = 16,
 477 };
 478
 479 /*
 480  * Detect which LCD panel is connected, and return the appropriate
 481  * clcd_panel structure.  Note: we do not have any information on
 482  * the required timings for the 8.4in panel, so we presently assume
 483  * VGA timings.
 484  */
 485 static struct clcd_panel *versatile_clcd_panel(void)
 486 {
 487         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 488         struct clcd_panel *panel = &vga;
 489         u32 val;
 490
 491         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 492         if (val == SYS_CLCD_ID_SANYO_3_8)
 493                 panel = &sanyo_3_8_in;
 494         else if (val == SYS_CLCD_ID_SANYO_2_5)
 495                 panel = &sanyo_2_5_in;
 496         else if (val == SYS_CLCD_ID_EPSON_2_2)
 497                 panel = &epson_2_2_in;
 498         else if (val == SYS_CLCD_ID_VGA)
 499                 panel = &vga;
 500         else {
 501                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 502                         val);
 503                 panel = &vga;
 504         }
 505
 506         return panel;
 507 }
 508
 509 /*
 510  * Disable all display connectors on the interface module.
 511  */
 512 static void versatile_clcd_disable(struct clcd_fb *fb)
 513 {
 514         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 515         u32 val;
 516
 517         val = readl(sys_clcd);
 518         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 519         writel(val, sys_clcd);
 520
 521 #ifdef CONFIG_MACH_VERSATILE_AB
 522         /*
 523          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 524          */
 525         if (fb->panel == &sanyo_2_5_in) {
 526                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 527                 unsigned long ctrl;
 528
 529                 ctrl = readl(versatile_ib2_ctrl);
 530                 ctrl &= ~0x01;
 531                 writel(ctrl, versatile_ib2_ctrl);
 532         }
 533 #endif
 534 }
 535
 536 /*
 537  * Enable the relevant connector on the interface module.
 538  */
 539 static void versatile_clcd_enable(struct clcd_fb *fb)
 540 {
 541         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 542         u32 val;
 543
 544         val = readl(sys_clcd);
 545         val &= ~SYS_CLCD_MODE_MASK;
 546
 547         switch (fb->fb.var.green.length) {
 548         case 5:
 549                 val |= SYS_CLCD_MODE_5551;
 550                 break;
 551         case 6:
 552                 val |= SYS_CLCD_MODE_565_RLSB;
 553                 break;
 554         case 8:
 555                 val |= SYS_CLCD_MODE_888;
 556                 break;
 557         }
 558
 559         /*
 560          * Set the MUX
 561          */
 562         writel(val, sys_clcd);
 563
 564         /*
 565          * And now enable the PSUs
 566          */
 567         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 568         writel(val, sys_clcd);
 569
 570 #ifdef CONFIG_MACH_VERSATILE_AB
 571         /*
 572          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 573          */
 574         if (fb->panel == &sanyo_2_5_in) {
 575                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 576                 unsigned long ctrl;
 577
 578                 ctrl = readl(versatile_ib2_ctrl);
 579                 ctrl |= 0x01;
 580                 writel(ctrl, versatile_ib2_ctrl);
 581         }
 582 #endif
 583 }
 584
 585 static unsigned long framesize = SZ_1M;
 586
 587 static int versatile_clcd_setup(struct clcd_fb *fb)
 588 {
 589         dma_addr_t dma;
 590
 591         fb->panel               = versatile_clcd_panel();
 592
 593         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 594                                                     &dma, GFP_KERNEL);
 595         if (!fb->fb.screen_base) {
 596                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 597                 return -ENOMEM;
 598         }
 599
 600         fb->fb.fix.smem_start   = dma;
 601         fb->fb.fix.smem_len     = framesize;
 602
 603         return 0;
 604 }
 605
 606 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 607 {
 608         return dma_mmap_writecombine(&fb->dev->dev, vma,
 609                                      fb->fb.screen_base,
 610                                      fb->fb.fix.smem_start,
 611                                      fb->fb.fix.smem_len);
 612 }
 613
 614 static void versatile_clcd_remove(struct clcd_fb *fb)
 615 {
 616         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 617                               fb->fb.screen_base, fb->fb.fix.smem_start);
 618 }
 619
 620 static struct clcd_board clcd_plat_data = {
 621         .name           = "Versatile",
 622         .check          = clcdfb_check,
 623         .decode         = clcdfb_decode,
 624         .disable        = versatile_clcd_disable,
 625         .enable         = versatile_clcd_enable,
 626         .setup          = versatile_clcd_setup,
 627         .mmap           = versatile_clcd_mmap,
 628         .remove         = versatile_clcd_remove,
 629 };
 630
 631 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 632 #define AACI_DMA        { 0x80, 0x81 }
 633 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 634 #define MMCI0_DMA       { 0x84, 0 }
 635 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 636 #define KMI0_DMA        { 0, 0 }
 637 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 638 #define KMI1_DMA        { 0, 0 }
 639
 640 /*
 641  * These devices are connected directly to the multi-layer AHB switch
 642  */
 643 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 644 #define SMC_DMA         { 0, 0 }
 645 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 646 #define MPMC_DMA        { 0, 0 }
 647 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 648 #define CLCD_DMA        { 0, 0 }
 649 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 650 #define DMAC_DMA        { 0, 0 }
 651
 652 /*
 653  * These devices are connected via the core APB bridge
 654  */
 655 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 656 #define SCTL_DMA        { 0, 0 }
 657 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 658 #define WATCHDOG_DMA    { 0, 0 }
 659 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 660 #define GPIO0_DMA       { 0, 0 }
 661 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 662 #define GPIO1_DMA       { 0, 0 }
 663 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 664 #define RTC_DMA         { 0, 0 }
 665
 666 /*
 667  * These devices are connected via the DMA APB bridge
 668  */
 669 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 670 #define SCI_DMA         { 7, 6 }
 671 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 672 #define UART0_DMA       { 15, 14 }
 673 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 674 #define UART1_DMA       { 13, 12 }
 675 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 676 #define UART2_DMA       { 11, 10 }
 677 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 678 #define SSP_DMA         { 9, 8 }
 679
 680 /* FPGA Primecells */
 681 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 682 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 683 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 684 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 685
 686 /* DevChip Primecells */
 687 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 688 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 689 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 690 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 691 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 692 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 693 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
 694 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 695 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 696 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 697 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 698 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 699 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 700 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
 701
 702 static struct amba_device *amba_devs[] __initdata = {
 703         &dmac_device,
 704         &uart0_device,
 705         &uart1_device,
 706         &uart2_device,
 707         &smc_device,
 708         &mpmc_device,
 709         &clcd_device,
 710         &sctl_device,
 711         &wdog_device,
 712         &gpio0_device,
 713         &gpio1_device,
 714         &rtc_device,
 715         &sci0_device,
 716         &ssp0_device,
 717         &aaci_device,
 718         &mmc0_device,
 719         &kmi0_device,
 720         &kmi1_device,
 721 };
 722
 723 #ifdef CONFIG_LEDS
 724 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 725
 726 static void versatile_leds_event(led_event_t ledevt)
 727 {
 728         unsigned long flags;
 729         u32 val;
 730
 731         local_irq_save(flags);
 732         val = readl(VA_LEDS_BASE);
 733
 734         switch (ledevt) {
 735         case led_idle_start:
 736                 val = val & ~VERSATILE_SYS_LED0;
 737                 break;
 738
 739         case led_idle_end:
 740                 val = val | VERSATILE_SYS_LED0;
 741                 break;
 742
 743         case led_timer:
 744                 val = val ^ VERSATILE_SYS_LED1;
 745                 break;
 746
 747         case led_halted:
 748                 val = 0;
 749                 break;
 750
 751         default:
 752                 break;
 753         }
 754
 755         writel(val, VA_LEDS_BASE);
 756         local_irq_restore(flags);
 757 }
 758 #endif  /* CONFIG_LEDS */
 759
 760 void __init versatile_init(void)
 761 {
 762         int i;
 763
 764         clk_register(&versatile_clcd_clk);
 765
 766         platform_device_register(&versatile_flash_device);
 767         platform_device_register(&smc91x_device);
 768
 769         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 770                 struct amba_device *d = amba_devs[i];
 771                 amba_device_register(d, &iomem_resource);
 772         }
 773
 774 #ifdef CONFIG_LEDS
 775         leds_event = versatile_leds_event;
 776 #endif
 777 }
 778
 779 /*
 780  * Where is the timer (VA)?
 781  */
 782 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
 783 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 784 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
 785 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
 786 #define VA_IC_BASE               __io_address(VERSATILE_VIC_BASE)
 787
 788 /*
 789  * How long is the timer interval?
 790  */
 791 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 792 #if TIMER_INTERVAL >= 0x100000
 793 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 794 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 795 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 796 #elif TIMER_INTERVAL >= 0x10000
 797 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 798 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 799 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 800 #else
 801 #define TIMER_RELOAD    (TIMER_INTERVAL)
 802 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 803 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 804 #endif
 805
 806 /*
 807  * Returns number of ms since last clock interrupt.  Note that interrupts
 808  * will have been disabled by do_gettimeoffset()
 809  */
 810 static unsigned long versatile_gettimeoffset(void)
 811 {
 812         unsigned long ticks1, ticks2, status;
 813
 814         /*
 815          * Get the current number of ticks.  Note that there is a race
 816          * condition between us reading the timer and checking for
 817          * an interrupt.  We get around this by ensuring that the
 818          * counter has not reloaded between our two reads.
 819          */
 820         ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 821         do {
 822                 ticks1 = ticks2;
 823                 status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
 824                 ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 825         } while (ticks2 > ticks1);
 826
 827         /*
 828          * Number of ticks since last interrupt.
 829          */
 830         ticks1 = TIMER_RELOAD - ticks2;
 831
 832         /*
 833          * Interrupt pending?  If so, we've reloaded once already.
 834          *
 835          * FIXME: Need to check this is effectively timer 0 that expires
 836          */
 837         if (status & IRQMASK_TIMERINT0_1)
 838                 ticks1 += TIMER_RELOAD;
 839
 840         /*
 841          * Convert the ticks to usecs
 842          */
 843         return TICKS2USECS(ticks1);
 844 }
 845
 846 /*
 847  * IRQ handler for the timer
 848  */
 849 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 850 {
 851         write_seqlock(&xtime_lock);
 852
 853         // ...clear the interrupt
 854         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 855
 856         timer_tick(regs);
 857
 858         write_sequnlock(&xtime_lock);
 859
 860         return IRQ_HANDLED;
 861 }
 862
 863 static struct irqaction versatile_timer_irq = {
 864         .name           = "Versatile Timer Tick",
 865         .flags          = SA_INTERRUPT | SA_TIMER,
 866         .handler        = versatile_timer_interrupt,
 867 };
 868
 869 /*
 870  * Set up timer interrupt, and return the current time in seconds.
 871  */
 872 static void __init versatile_timer_init(void)
 873 {
 874         u32 val;
 875
 876         /*
 877          * set clock frequency:
 878          *      VERSATILE_REFCLK is 32KHz
 879          *      VERSATILE_TIMCLK is 1MHz
 880          */
 881         val = readl(__io_address(VERSATILE_SCTL_BASE));
 882         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 883                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 884                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 885                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 886                __io_address(VERSATILE_SCTL_BASE));
 887
 888         /*
 889          * Initialise to a known state (all timers off)
 890          */
 891         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 892         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 893         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 894         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 895
 896         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 897         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
 898         writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
 899                TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 900
 901         /*
 902          * Make irqs happen for the system timer
 903          */
 904         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
 905 }
 906
 907 struct sys_timer versatile_timer = {
 908         .init           = versatile_timer_init,
 909         .offset         = versatile_gettimeoffset,
 910 };