arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 /*
  14 /memreserve/    00000000 1000000;
  15 */
  16
  17 / {
  18         model = "MPC8568EMDS";
  19         compatible = "MPC8568EMDS", "MPC85xxMDS";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,8568@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <20>;       // 32 bytes
  31                         i-cache-line-size = <20>;       // 32 bytes
  32                         d-cache-size = <8000>;          // L1, 32K
  33                         i-cache-size = <8000>;          // L1, 32K
  34                         timebase-frequency = <0>;
  35                         bus-frequency = <0>;
  36                         clock-frequency = <0>;
  37                 };
  38         };
  39
  40         memory {
  41                 device_type = "memory";
  42                 reg = <00000000 10000000>;
  43         };
  44
  45         bcsr@f8000000 {
  46                 device_type = "board-control";
  47                 reg = <f8000000 8000>;
  48         };
  49
  50         soc8568@e0000000 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 device_type = "soc";
  54                 ranges = <0 e0000000 00100000>;
  55                 reg = <e0000000 00100000>;
  56                 bus-frequency = <0>;
  57
  58                 memory-controller@2000 {
  59                         compatible = "fsl,8568-memory-controller";
  60                         reg = <2000 1000>;
  61                         interrupt-parent = <&mpic>;
  62                         interrupts = <12 2>;
  63                 };
  64
  65                 l2-cache-controller@20000 {
  66                         compatible = "fsl,8568-l2-cache-controller";
  67                         reg = <20000 1000>;
  68                         cache-line-size = <20>; // 32 bytes
  69                         cache-size = <80000>;   // L2, 512K
  70                         interrupt-parent = <&mpic>;
  71                         interrupts = <10 2>;
  72                 };
  73
  74                 i2c@3000 {
  75                         device_type = "i2c";
  76                         compatible = "fsl-i2c";
  77                         reg = <3000 100>;
  78                         interrupts = <2b 2>;
  79                         interrupt-parent = <&mpic>;
  80                         dfsrr;
  81                 };
  82
  83                 i2c@3100 {
  84                         device_type = "i2c";
  85                         compatible = "fsl-i2c";
  86                         reg = <3100 100>;
  87                         interrupts = <2b 2>;
  88                         interrupt-parent = <&mpic>;
  89                         dfsrr;
  90                 };
  91
  92                 mdio@24520 {
  93                         #address-cells = <1>;
  94                         #size-cells = <0>;
  95                         device_type = "mdio";
  96                         compatible = "gianfar";
  97                         reg = <24520 20>;
  98                         phy0: ethernet-phy@0 {
  99                                 interrupt-parent = <&mpic>;
 100                                 interrupts = <1 1>;
 101                                 reg = <0>;
 102                                 device_type = "ethernet-phy";
 103                         };
 104                         phy1: ethernet-phy@1 {
 105                                 interrupt-parent = <&mpic>;
 106                                 interrupts = <2 1>;
 107                                 reg = <1>;
 108                                 device_type = "ethernet-phy";
 109                         };
 110                         phy2: ethernet-phy@2 {
 111                                 interrupt-parent = <&mpic>;
 112                                 interrupts = <1 1>;
 113                                 reg = <2>;
 114                                 device_type = "ethernet-phy";
 115                         };
 116                         phy3: ethernet-phy@3 {
 117                                 interrupt-parent = <&mpic>;
 118                                 interrupts = <2 1>;
 119                                 reg = <3>;
 120                                 device_type = "ethernet-phy";
 121                         };
 122                 };
 123
 124                 ethernet@24000 {
 125                         #address-cells = <1>;
 126                         #size-cells = <0>;
 127                         device_type = "network";
 128                         model = "eTSEC";
 129                         compatible = "gianfar";
 130                         reg = <24000 1000>;
 131                         /*
 132                          * mac-address is deprecated and will be removed
 133                          * in 2.6.25.  Only recent versions of
 134                          * U-Boot support local-mac-address, however.
 135                          */
 136                         mac-address = [ 00 00 00 00 00 00 ];
 137                         local-mac-address = [ 00 00 00 00 00 00 ];
 138                         interrupts = <1d 2 1e 2 22 2>;
 139                         interrupt-parent = <&mpic>;
 140                         phy-handle = <&phy2>;
 141                 };
 142
 143                 ethernet@25000 {
 144                         #address-cells = <1>;
 145                         #size-cells = <0>;
 146                         device_type = "network";
 147                         model = "eTSEC";
 148                         compatible = "gianfar";
 149                         reg = <25000 1000>;
 150                         /*
 151                          * mac-address is deprecated and will be removed
 152                          * in 2.6.25.  Only recent versions of
 153                          * U-Boot support local-mac-address, however.
 154                          */
 155                         mac-address = [ 00 00 00 00 00 00 ];
 156                         local-mac-address = [ 00 00 00 00 00 00 ];
 157                         interrupts = <23 2 24 2 28 2>;
 158                         interrupt-parent = <&mpic>;
 159                         phy-handle = <&phy3>;
 160                 };
 161
 162                 serial@4500 {
 163                         device_type = "serial";
 164                         compatible = "ns16550";
 165                         reg = <4500 100>;
 166                         clock-frequency = <0>;
 167                         interrupts = <2a 2>;
 168                         interrupt-parent = <&mpic>;
 169                 };
 170
 171                 global-utilities@e0000 {        //global utilities block
 172                         compatible = "fsl,mpc8548-guts";
 173                         reg = <e0000 1000>;
 174                         fsl,has-rstcr;
 175                 };
 176
 177                 pci@8000 {
 178                         interrupt-map-mask = <f800 0 0 7>;
 179                         interrupt-map = <
 180                                 /* IDSEL 0x12 AD18 */
 181                                 9000 0 0 1 &mpic 5 1
 182                                 9000 0 0 2 &mpic 6 1
 183                                 9000 0 0 3 &mpic 7 1
 184                                 9000 0 0 4 &mpic 4 1
 185
 186                                 /* IDSEL 0x13 AD19 */
 187                                 9800 0 0 1 &mpic 6 1
 188                                 9800 0 0 2 &mpic 7 1
 189                                 9800 0 0 3 &mpic 4 1
 190                                 9800 0 0 4 &mpic 5 1>;
 191
 192                         interrupt-parent = <&mpic>;
 193                         interrupts = <18 2>;
 194                         bus-range = <0 ff>;
 195                         ranges = <02000000 0 80000000 80000000 0 20000000
 196                                   01000000 0 00000000 e2000000 0 00800000>;
 197                         clock-frequency = <3f940aa>;
 198                         #interrupt-cells = <1>;
 199                         #size-cells = <2>;
 200                         #address-cells = <3>;
 201                         reg = <8000 1000>;
 202                         compatible = "fsl,mpc8540-pci";
 203                         device_type = "pci";
 204                 };
 205
 206                 /* PCI Express */
 207                 pcie@a000 {
 208                         interrupt-map-mask = <f800 0 0 7>;
 209                         interrupt-map = <
 210
 211                                 /* IDSEL 0x0 (PEX) */
 212                                 00000 0 0 1 &mpic 0 1
 213                                 00000 0 0 2 &mpic 1 1
 214                                 00000 0 0 3 &mpic 2 1
 215                                 00000 0 0 4 &mpic 3 1>;
 216
 217                         interrupt-parent = <&mpic>;
 218                         interrupts = <1a 2>;
 219                         bus-range = <0 ff>;
 220                         ranges = <02000000 0 a0000000 a0000000 0 20000000
 221                                   01000000 0 00000000 e3000000 0 08000000>;
 222                         clock-frequency = <1fca055>;
 223                         #interrupt-cells = <1>;
 224                         #size-cells = <2>;
 225                         #address-cells = <3>;
 226                         reg = <a000 1000>;
 227                         compatible = "fsl,mpc8548-pcie";
 228                         device_type = "pci";
 229                 };
 230
 231                 serial@4600 {
 232                         device_type = "serial";
 233                         compatible = "ns16550";
 234                         reg = <4600 100>;
 235                         clock-frequency = <0>;
 236                         interrupts = <2a 2>;
 237                         interrupt-parent = <&mpic>;
 238                 };
 239
 240                 crypto@30000 {
 241                         device_type = "crypto";
 242                         model = "SEC2";
 243                         compatible = "talitos";
 244                         reg = <30000 f000>;
 245                         interrupts = <2d 2>;
 246                         interrupt-parent = <&mpic>;
 247                         num-channels = <4>;
 248                         channel-fifo-len = <18>;
 249                         exec-units-mask = <000000fe>;
 250                         descriptor-types-mask = <012b0ebf>;
 251                 };
 252
 253                 mpic: pic@40000 {
 254                         clock-frequency = <0>;
 255                         interrupt-controller;
 256                         #address-cells = <0>;
 257                         #interrupt-cells = <2>;
 258                         reg = <40000 40000>;
 259                         compatible = "chrp,open-pic";
 260                         device_type = "open-pic";
 261                         big-endian;
 262                 };
 263                 par_io@e0100 {
 264                         reg = <e0100 100>;
 265                         device_type = "par_io";
 266                         num-ports = <7>;
 267
 268                         pio1: ucc_pin@01 {
 269                                 pio-map = <
 270                         /* port  pin  dir  open_drain  assignment  has_irq */
 271                                         4  0a  1  0  2  0       /* TxD0 */
 272                                         4  09  1  0  2  0       /* TxD1 */
 273                                         4  08  1  0  2  0       /* TxD2 */
 274                                         4  07  1  0  2  0       /* TxD3 */
 275                                         4  17  1  0  2  0       /* TxD4 */
 276                                         4  16  1  0  2  0       /* TxD5 */
 277                                         4  15  1  0  2  0       /* TxD6 */
 278                                         4  14  1  0  2  0       /* TxD7 */
 279                                         4  0f  2  0  2  0       /* RxD0 */
 280                                         4  0e  2  0  2  0       /* RxD1 */
 281                                         4  0d  2  0  2  0       /* RxD2 */
 282                                         4  0c  2  0  2  0       /* RxD3 */
 283                                         4  1d  2  0  2  0       /* RxD4 */
 284                                         4  1c  2  0  2  0       /* RxD5 */
 285                                         4  1b  2  0  2  0       /* RxD6 */
 286                                         4  1a  2  0  2  0       /* RxD7 */
 287                                         4  0b  1  0  2  0       /* TX_EN */
 288                                         4  18  1  0  2  0       /* TX_ER */
 289                                         4  0f  2  0  2  0       /* RX_DV */
 290                                         4  1e  2  0  2  0       /* RX_ER */
 291                                         4  11  2  0  2  0       /* RX_CLK */
 292                                         4  13  1  0  2  0       /* GTX_CLK */
 293                                         1  1f  2  0  3  0>;     /* GTX125 */
 294                         };
 295                         pio2: ucc_pin@02 {
 296                                 pio-map = <
 297                         /* port  pin  dir  open_drain  assignment  has_irq */
 298                                         5  0a 1  0  2  0   /* TxD0 */
 299                                         5  09 1  0  2  0   /* TxD1 */
 300                                         5  08 1  0  2  0   /* TxD2 */
 301                                         5  07 1  0  2  0   /* TxD3 */
 302                                         5  17 1  0  2  0   /* TxD4 */
 303                                         5  16 1  0  2  0   /* TxD5 */
 304                                         5  15 1  0  2  0   /* TxD6 */
 305                                         5  14 1  0  2  0   /* TxD7 */
 306                                         5  0f 2  0  2  0   /* RxD0 */
 307                                         5  0e 2  0  2  0   /* RxD1 */
 308                                         5  0d 2  0  2  0   /* RxD2 */
 309                                         5  0c 2  0  2  0   /* RxD3 */
 310                                         5  1d 2  0  2  0   /* RxD4 */
 311                                         5  1c 2  0  2  0   /* RxD5 */
 312                                         5  1b 2  0  2  0   /* RxD6 */
 313                                         5  1a 2  0  2  0   /* RxD7 */
 314                                         5  0b 1  0  2  0   /* TX_EN */
 315                                         5  18 1  0  2  0   /* TX_ER */
 316                                         5  10 2  0  2  0   /* RX_DV */
 317                                         5  1e 2  0  2  0   /* RX_ER */
 318                                         5  11 2  0  2  0   /* RX_CLK */
 319                                         5  13 1  0  2  0   /* GTX_CLK */
 320                                         1  1f 2  0  3  0   /* GTX125 */
 321                                         4  06 3  0  2  0   /* MDIO */
 322                                         4  05 1  0  2  0>; /* MDC */
 323                         };
 324                 };
 325         };
 326
 327         qe@e0080000 {
 328                 #address-cells = <1>;
 329                 #size-cells = <1>;
 330                 device_type = "qe";
 331                 model = "QE";
 332                 ranges = <0 e0080000 00040000>;
 333                 reg = <e0080000 480>;
 334                 brg-frequency = <0>;
 335                 bus-frequency = <179A7B00>;
 336
 337                 muram@10000 {
 338                         device_type = "muram";
 339                         ranges = <0 00010000 0000c000>;
 340
 341                         data-only@0{
 342                                 reg = <0 c000>;
 343                         };
 344                 };
 345
 346                 spi@4c0 {
 347                         device_type = "spi";
 348                         compatible = "fsl_spi";
 349                         reg = <4c0 40>;
 350                         interrupts = <2>;
 351                         interrupt-parent = <&qeic>;
 352                         mode = "cpu";
 353                 };
 354
 355                 spi@500 {
 356                         device_type = "spi";
 357                         compatible = "fsl_spi";
 358                         reg = <500 40>;
 359                         interrupts = <1>;
 360                         interrupt-parent = <&qeic>;
 361                         mode = "cpu";
 362                 };
 363
 364                 ucc@2000 {
 365                         device_type = "network";
 366                         compatible = "ucc_geth";
 367                         model = "UCC";
 368                         device-id = <1>;
 369                         reg = <2000 200>;
 370                         interrupts = <20>;
 371                         interrupt-parent = <&qeic>;
 372                         /*
 373                          * mac-address is deprecated and will be removed
 374                          * in 2.6.25.  Only recent versions of
 375                          * U-Boot support local-mac-address, however.
 376                          */
 377                         mac-address = [ 00 00 00 00 00 00 ];
 378                         local-mac-address = [ 00 00 00 00 00 00 ];
 379                         rx-clock = <0>;
 380                         tx-clock = <19>;
 381                         phy-handle = <&qe_phy0>;
 382                         phy-connection-type = "gmii";
 383                         pio-handle = <&pio1>;
 384                 };
 385
 386                 ucc@3000 {
 387                         device_type = "network";
 388                         compatible = "ucc_geth";
 389                         model = "UCC";
 390                         device-id = <2>;
 391                         reg = <3000 200>;
 392                         interrupts = <21>;
 393                         interrupt-parent = <&qeic>;
 394                         /*
 395                          * mac-address is deprecated and will be removed
 396                          * in 2.6.25.  Only recent versions of
 397                          * U-Boot support local-mac-address, however.
 398                          */
 399                         mac-address = [ 00 00 00 00 00 00 ];
 400                         local-mac-address = [ 00 00 00 00 00 00 ];
 401                         rx-clock = <0>;
 402                         tx-clock = <14>;
 403                         phy-handle = <&qe_phy1>;
 404                         phy-connection-type = "gmii";
 405                         pio-handle = <&pio2>;
 406                 };
 407
 408                 mdio@2120 {
 409                         #address-cells = <1>;
 410                         #size-cells = <0>;
 411                         reg = <2120 18>;
 412                         device_type = "mdio";
 413                         compatible = "ucc_geth_phy";
 414
 415                         /* These are the same PHYs as on
 416                          * gianfar's MDIO bus */
 417                         qe_phy0: ethernet-phy@00 {
 418                                 interrupt-parent = <&mpic>;
 419                                 interrupts = <1 1>;
 420                                 reg = <0>;
 421                                 device_type = "ethernet-phy";
 422                         };
 423                         qe_phy1: ethernet-phy@01 {
 424                                 interrupt-parent = <&mpic>;
 425                                 interrupts = <2 1>;
 426                                 reg = <1>;
 427                                 device_type = "ethernet-phy";
 428                         };
 429                         qe_phy2: ethernet-phy@02 {
 430                                 interrupt-parent = <&mpic>;
 431                                 interrupts = <1 1>;
 432                                 reg = <2>;
 433                                 device_type = "ethernet-phy";
 434                         };
 435                         qe_phy3: ethernet-phy@03 {
 436                                 interrupt-parent = <&mpic>;
 437                                 interrupts = <2 1>;
 438                                 reg = <3>;
 439                                 device_type = "ethernet-phy";
 440                         };
 441                 };
 442
 443                 qeic: qeic@80 {
 444                         interrupt-controller;
 445                         device_type = "qeic";
 446                         #address-cells = <0>;
 447                         #interrupt-cells = <1>;
 448                         reg = <80 80>;
 449                         big-endian;
 450                         interrupts = <2e 2 2e 2>; //high:30 low:30
 451                         interrupt-parent = <&mpic>;
 452                 };
 453
 454         };
 455 };