arch/powerpc/oprofile/common.c

   1 /*
   2  * PPC 64 oprofile support:
   3  * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
   4  * PPC 32 oprofile support: (based on PPC 64 support)
   5  * Copyright (C) Freescale Semiconductor, Inc 2004
   6  *      Author: Andy Fleming
   7  *
   8  * Based on alpha version.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version
  13  * 2 of the License, or (at your option) any later version.
  14  */
  15
  16 #include <linux/oprofile.h>
  17 #ifndef __powerpc64__
  18 #include <linux/slab.h>
  19 #endif /* ! __powerpc64__ */
  20 #include <linux/init.h>
  21 #include <linux/smp.h>
  22 #include <linux/errno.h>
  23 #include <asm/ptrace.h>
  24 #include <asm/system.h>
  25 #ifdef __powerpc64__
  26 #include <asm/pmc.h>
  27 #else /* __powerpc64__ */
  28 #include <asm/perfmon.h>
  29 #endif /* __powerpc64__ */
  30 #include <asm/cputable.h>
  31 #include <asm/oprofile_impl.h>
  32
  33 static struct op_powerpc_model *model;
  34
  35 static struct op_counter_config ctr[OP_MAX_COUNTER];
  36 static struct op_system_config sys;
  37
  38 #ifndef __powerpc64__
  39 static char *cpu_type;
  40 #endif /* ! __powerpc64__ */
  41
  42 static void op_handle_interrupt(struct pt_regs *regs)
  43 {
  44         model->handle_interrupt(regs, ctr);
  45 }
  46
  47 static int op_powerpc_setup(void)
  48 {
  49         int err;
  50
  51         /* Grab the hardware */
  52         err = reserve_pmc_hardware(op_handle_interrupt);
  53         if (err)
  54                 return err;
  55
  56         /* Pre-compute the values to stuff in the hardware registers.  */
  57         model->reg_setup(ctr, &sys, model->num_counters);
  58
  59         /* Configure the registers on all cpus.  */
  60 #ifdef __powerpc64__
  61         on_each_cpu(model->cpu_setup, NULL, 0, 1);
  62 #else /* __powerpc64__ */
  63 #if 0
  64         /* FIXME: Make multi-cpu work */
  65         on_each_cpu(model->reg_setup, NULL, 0, 1);
  66 #endif
  67 #endif /* __powerpc64__ */
  68
  69         return 0;
  70 }
  71
  72 static void op_powerpc_shutdown(void)
  73 {
  74         release_pmc_hardware();
  75 }
  76
  77 static void op_powerpc_cpu_start(void *dummy)
  78 {
  79         model->start(ctr);
  80 }
  81
  82 static int op_powerpc_start(void)
  83 {
  84         on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
  85         return 0;
  86 }
  87
  88 static inline void op_powerpc_cpu_stop(void *dummy)
  89 {
  90         model->stop();
  91 }
  92
  93 static void op_powerpc_stop(void)
  94 {
  95         on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
  96 }
  97
  98 static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
  99 {
 100         int i;
 101
 102 #ifdef __powerpc64__
 103         /*
 104          * There is one mmcr0, mmcr1 and mmcra for setting the events for
 105          * all of the counters.
 106          */
 107         oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
 108         oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
 109         oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
 110 #endif /* __powerpc64__ */
 111
 112         for (i = 0; i < model->num_counters; ++i) {
 113                 struct dentry *dir;
 114                 char buf[3];
 115
 116                 snprintf(buf, sizeof buf, "%d", i);
 117                 dir = oprofilefs_mkdir(sb, root, buf);
 118
 119                 oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 120                 oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 121                 oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
 122 #ifdef __powerpc64__
 123                 /*
 124                  * We dont support per counter user/kernel selection, but
 125                  * we leave the entries because userspace expects them
 126                  */
 127 #endif /* __powerpc64__ */
 128                 oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 129                 oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
 130
 131 #ifndef __powerpc64__
 132                 /* FIXME: Not sure if this is used */
 133 #endif /* ! __powerpc64__ */
 134                 oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 135         }
 136
 137         oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
 138         oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
 139 #ifdef __powerpc64__
 140         oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
 141                                 &sys.backtrace_spinlocks);
 142 #endif /* __powerpc64__ */
 143
 144         /* Default to tracing both kernel and user */
 145         sys.enable_kernel = 1;
 146         sys.enable_user = 1;
 147 #ifdef __powerpc64__
 148         /* Turn on backtracing through spinlocks by default */
 149         sys.backtrace_spinlocks = 1;
 150 #endif /* __powerpc64__ */
 151
 152         return 0;
 153 }
 154
 155 int __init oprofile_arch_init(struct oprofile_operations *ops)
 156 {
 157 #ifndef __powerpc64__
 158 #ifdef CONFIG_FSL_BOOKE
 159         model = &op_model_fsl_booke;
 160 #else
 161         return -ENODEV;
 162 #endif
 163
 164         cpu_type = kmalloc(32, GFP_KERNEL);
 165         if (NULL == cpu_type)
 166                 return -ENOMEM;
 167
 168         sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name);
 169
 170         model->num_counters = cur_cpu_spec->num_pmcs;
 171
 172         ops->cpu_type = cpu_type;
 173 #else /* __powerpc64__ */
 174         if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
 175                 return -ENODEV;
 176         model = cur_cpu_spec->oprofile_model;
 177         model->num_counters = cur_cpu_spec->num_pmcs;
 178
 179         ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
 180 #endif /* __powerpc64__ */
 181         ops->create_files = op_powerpc_create_files;
 182         ops->setup = op_powerpc_setup;
 183         ops->shutdown = op_powerpc_shutdown;
 184         ops->start = op_powerpc_start;
 185         ops->stop = op_powerpc_stop;
 186
 187         printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
 188                ops->cpu_type);
 189
 190         return 0;
 191 }
 192
 193 void oprofile_arch_exit(void)
 194 {
 195 #ifndef __powerpc64__
 196         kfree(cpu_type);
 197         cpu_type = NULL;
 198 #endif /* ! __powerpc64__ */
 199 }