drivers/net/e1000/e1000_ethtool.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /* ethtool support for e1000 */
  30
  31 #include "e1000.h"
  32
  33 #include <asm/uaccess.h>
  34
  35 extern char e1000_driver_name[];
  36 extern char e1000_driver_version[];
  37
  38 extern int e1000_up(struct e1000_adapter *adapter);
  39 extern void e1000_down(struct e1000_adapter *adapter);
  40 extern void e1000_reinit_locked(struct e1000_adapter *adapter);
  41 extern void e1000_reset(struct e1000_adapter *adapter);
  42 extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
  43 extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
  44 extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
  45 extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
  46 extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
  47 extern void e1000_update_stats(struct e1000_adapter *adapter);
  48
  49
  50 struct e1000_stats {
  51         char stat_string[ETH_GSTRING_LEN];
  52         int sizeof_stat;
  53         int stat_offset;
  54 };
  55
  56 #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
  57                       offsetof(struct e1000_adapter, m)
  58 static const struct e1000_stats e1000_gstrings_stats[] = {
  59         { "rx_packets", E1000_STAT(stats.gprc) },
  60         { "tx_packets", E1000_STAT(stats.gptc) },
  61         { "rx_bytes", E1000_STAT(stats.gorcl) },
  62         { "tx_bytes", E1000_STAT(stats.gotcl) },
  63         { "rx_broadcast", E1000_STAT(stats.bprc) },
  64         { "tx_broadcast", E1000_STAT(stats.bptc) },
  65         { "rx_multicast", E1000_STAT(stats.mprc) },
  66         { "tx_multicast", E1000_STAT(stats.mptc) },
  67         { "rx_errors", E1000_STAT(stats.rxerrc) },
  68         { "tx_errors", E1000_STAT(stats.txerrc) },
  69         { "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
  70         { "multicast", E1000_STAT(stats.mprc) },
  71         { "collisions", E1000_STAT(stats.colc) },
  72         { "rx_length_errors", E1000_STAT(stats.rlerrc) },
  73         { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
  74         { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
  75         { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
  76         { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
  77         { "rx_missed_errors", E1000_STAT(stats.mpc) },
  78         { "tx_aborted_errors", E1000_STAT(stats.ecol) },
  79         { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
  80         { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
  81         { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
  82         { "tx_window_errors", E1000_STAT(stats.latecol) },
  83         { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
  84         { "tx_deferred_ok", E1000_STAT(stats.dc) },
  85         { "tx_single_coll_ok", E1000_STAT(stats.scc) },
  86         { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
  87         { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
  88         { "rx_long_length_errors", E1000_STAT(stats.roc) },
  89         { "rx_short_length_errors", E1000_STAT(stats.ruc) },
  90         { "rx_align_errors", E1000_STAT(stats.algnerrc) },
  91         { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
  92         { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
  93         { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
  94         { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
  95         { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
  96         { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
  97         { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
  98         { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
  99         { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
 100         { "rx_header_split", E1000_STAT(rx_hdr_split) },
 101         { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
 102 };
 103
 104 #define E1000_QUEUE_STATS_LEN 0
 105 #define E1000_GLOBAL_STATS_LEN  \
 106         sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
 107 #define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
 108 static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
 109         "Register test  (offline)", "Eeprom test    (offline)",
 110         "Interrupt test (offline)", "Loopback test  (offline)",
 111         "Link test   (on/offline)"
 112 };
 113 #define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN
 114
 115 static int
 116 e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 117 {
 118         struct e1000_adapter *adapter = netdev_priv(netdev);
 119         struct e1000_hw *hw = &adapter->hw;
 120
 121         if (hw->media_type == e1000_media_type_copper) {
 122
 123                 ecmd->supported = (SUPPORTED_10baseT_Half |
 124                                    SUPPORTED_10baseT_Full |
 125                                    SUPPORTED_100baseT_Half |
 126                                    SUPPORTED_100baseT_Full |
 127                                    SUPPORTED_1000baseT_Full|
 128                                    SUPPORTED_Autoneg |
 129                                    SUPPORTED_TP);
 130                 if (hw->phy_type == e1000_phy_ife)
 131                         ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 132                 ecmd->advertising = ADVERTISED_TP;
 133
 134                 if (hw->autoneg == 1) {
 135                         ecmd->advertising |= ADVERTISED_Autoneg;
 136
 137                         /* the e1000 autoneg seems to match ethtool nicely */
 138
 139                         ecmd->advertising |= hw->autoneg_advertised;
 140                 }
 141
 142                 ecmd->port = PORT_TP;
 143                 ecmd->phy_address = hw->phy_addr;
 144
 145                 if (hw->mac_type == e1000_82543)
 146                         ecmd->transceiver = XCVR_EXTERNAL;
 147                 else
 148                         ecmd->transceiver = XCVR_INTERNAL;
 149
 150         } else {
 151                 ecmd->supported   = (SUPPORTED_1000baseT_Full |
 152                                      SUPPORTED_FIBRE |
 153                                      SUPPORTED_Autoneg);
 154
 155                 ecmd->advertising = (ADVERTISED_1000baseT_Full |
 156                                      ADVERTISED_FIBRE |
 157                                      ADVERTISED_Autoneg);
 158
 159                 ecmd->port = PORT_FIBRE;
 160
 161                 if (hw->mac_type >= e1000_82545)
 162                         ecmd->transceiver = XCVR_INTERNAL;
 163                 else
 164                         ecmd->transceiver = XCVR_EXTERNAL;
 165         }
 166
 167         if (netif_carrier_ok(adapter->netdev)) {
 168
 169                 e1000_get_speed_and_duplex(hw, &adapter->link_speed,
 170                                                    &adapter->link_duplex);
 171                 ecmd->speed = adapter->link_speed;
 172
 173                 /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
 174                  *          and HALF_DUPLEX != DUPLEX_HALF */
 175
 176                 if (adapter->link_duplex == FULL_DUPLEX)
 177                         ecmd->duplex = DUPLEX_FULL;
 178                 else
 179                         ecmd->duplex = DUPLEX_HALF;
 180         } else {
 181                 ecmd->speed = -1;
 182                 ecmd->duplex = -1;
 183         }
 184
 185         ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
 186                          hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 187         return 0;
 188 }
 189
 190 static int
 191 e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 192 {
 193         struct e1000_adapter *adapter = netdev_priv(netdev);
 194         struct e1000_hw *hw = &adapter->hw;
 195
 196         /* When SoL/IDER sessions are active, autoneg/speed/duplex
 197          * cannot be changed */
 198         if (e1000_check_phy_reset_block(hw)) {
 199                 DPRINTK(DRV, ERR, "Cannot change link characteristics "
 200                         "when SoL/IDER is active.\n");
 201                 return -EINVAL;
 202         }
 203
 204         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 205                 msleep(1);
 206
 207         if (ecmd->autoneg == AUTONEG_ENABLE) {
 208                 hw->autoneg = 1;
 209                 if (hw->media_type == e1000_media_type_fiber)
 210                         hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
 211                                      ADVERTISED_FIBRE |
 212                                      ADVERTISED_Autoneg;
 213                 else
 214                         hw->autoneg_advertised = ecmd->advertising |
 215                                                  ADVERTISED_TP |
 216                                                  ADVERTISED_Autoneg;
 217                 ecmd->advertising = hw->autoneg_advertised;
 218         } else
 219                 if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
 220                         clear_bit(__E1000_RESETTING, &adapter->flags);
 221                         return -EINVAL;
 222                 }
 223
 224         /* reset the link */
 225
 226         if (netif_running(adapter->netdev)) {
 227                 e1000_down(adapter);
 228                 e1000_up(adapter);
 229         } else
 230                 e1000_reset(adapter);
 231
 232         clear_bit(__E1000_RESETTING, &adapter->flags);
 233         return 0;
 234 }
 235
 236 static void
 237 e1000_get_pauseparam(struct net_device *netdev,
 238                      struct ethtool_pauseparam *pause)
 239 {
 240         struct e1000_adapter *adapter = netdev_priv(netdev);
 241         struct e1000_hw *hw = &adapter->hw;
 242
 243         pause->autoneg =
 244                 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
 245
 246         if (hw->fc == E1000_FC_RX_PAUSE)
 247                 pause->rx_pause = 1;
 248         else if (hw->fc == E1000_FC_TX_PAUSE)
 249                 pause->tx_pause = 1;
 250         else if (hw->fc == E1000_FC_FULL) {
 251                 pause->rx_pause = 1;
 252                 pause->tx_pause = 1;
 253         }
 254 }
 255
 256 static int
 257 e1000_set_pauseparam(struct net_device *netdev,
 258                      struct ethtool_pauseparam *pause)
 259 {
 260         struct e1000_adapter *adapter = netdev_priv(netdev);
 261         struct e1000_hw *hw = &adapter->hw;
 262         int retval = 0;
 263
 264         adapter->fc_autoneg = pause->autoneg;
 265
 266         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 267                 msleep(1);
 268
 269         if (pause->rx_pause && pause->tx_pause)
 270                 hw->fc = E1000_FC_FULL;
 271         else if (pause->rx_pause && !pause->tx_pause)
 272                 hw->fc = E1000_FC_RX_PAUSE;
 273         else if (!pause->rx_pause && pause->tx_pause)
 274                 hw->fc = E1000_FC_TX_PAUSE;
 275         else if (!pause->rx_pause && !pause->tx_pause)
 276                 hw->fc = E1000_FC_NONE;
 277
 278         hw->original_fc = hw->fc;
 279
 280         if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 281                 if (netif_running(adapter->netdev)) {
 282                         e1000_down(adapter);
 283                         e1000_up(adapter);
 284                 } else
 285                         e1000_reset(adapter);
 286         } else
 287                 retval = ((hw->media_type == e1000_media_type_fiber) ?
 288                            e1000_setup_link(hw) : e1000_force_mac_fc(hw));
 289
 290         clear_bit(__E1000_RESETTING, &adapter->flags);
 291         return retval;
 292 }
 293
 294 static uint32_t
 295 e1000_get_rx_csum(struct net_device *netdev)
 296 {
 297         struct e1000_adapter *adapter = netdev_priv(netdev);
 298         return adapter->rx_csum;
 299 }
 300
 301 static int
 302 e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
 303 {
 304         struct e1000_adapter *adapter = netdev_priv(netdev);
 305         adapter->rx_csum = data;
 306
 307         if (netif_running(netdev))
 308                 e1000_reinit_locked(adapter);
 309         else
 310                 e1000_reset(adapter);
 311         return 0;
 312 }
 313
 314 static uint32_t
 315 e1000_get_tx_csum(struct net_device *netdev)
 316 {
 317         return (netdev->features & NETIF_F_HW_CSUM) != 0;
 318 }
 319
 320 static int
 321 e1000_set_tx_csum(struct net_device *netdev, uint32_t data)
 322 {
 323         struct e1000_adapter *adapter = netdev_priv(netdev);
 324
 325         if (adapter->hw.mac_type < e1000_82543) {
 326                 if (!data)
 327                         return -EINVAL;
 328                 return 0;
 329         }
 330
 331         if (data)
 332                 netdev->features |= NETIF_F_HW_CSUM;
 333         else
 334                 netdev->features &= ~NETIF_F_HW_CSUM;
 335
 336         return 0;
 337 }
 338
 339 #ifdef NETIF_F_TSO
 340 static int
 341 e1000_set_tso(struct net_device *netdev, uint32_t data)
 342 {
 343         struct e1000_adapter *adapter = netdev_priv(netdev);
 344         if ((adapter->hw.mac_type < e1000_82544) ||
 345             (adapter->hw.mac_type == e1000_82547))
 346                 return data ? -EINVAL : 0;
 347
 348         if (data)
 349                 netdev->features |= NETIF_F_TSO;
 350         else
 351                 netdev->features &= ~NETIF_F_TSO;
 352
 353         DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
 354         adapter->tso_force = TRUE;
 355         return 0;
 356 }
 357 #endif /* NETIF_F_TSO */
 358
 359 static uint32_t
 360 e1000_get_msglevel(struct net_device *netdev)
 361 {
 362         struct e1000_adapter *adapter = netdev_priv(netdev);
 363         return adapter->msg_enable;
 364 }
 365
 366 static void
 367 e1000_set_msglevel(struct net_device *netdev, uint32_t data)
 368 {
 369         struct e1000_adapter *adapter = netdev_priv(netdev);
 370         adapter->msg_enable = data;
 371 }
 372
 373 static int
 374 e1000_get_regs_len(struct net_device *netdev)
 375 {
 376 #define E1000_REGS_LEN 32
 377         return E1000_REGS_LEN * sizeof(uint32_t);
 378 }
 379
 380 static void
 381 e1000_get_regs(struct net_device *netdev,
 382                struct ethtool_regs *regs, void *p)
 383 {
 384         struct e1000_adapter *adapter = netdev_priv(netdev);
 385         struct e1000_hw *hw = &adapter->hw;
 386         uint32_t *regs_buff = p;
 387         uint16_t phy_data;
 388
 389         memset(p, 0, E1000_REGS_LEN * sizeof(uint32_t));
 390
 391         regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
 392
 393         regs_buff[0]  = E1000_READ_REG(hw, CTRL);
 394         regs_buff[1]  = E1000_READ_REG(hw, STATUS);
 395
 396         regs_buff[2]  = E1000_READ_REG(hw, RCTL);
 397         regs_buff[3]  = E1000_READ_REG(hw, RDLEN);
 398         regs_buff[4]  = E1000_READ_REG(hw, RDH);
 399         regs_buff[5]  = E1000_READ_REG(hw, RDT);
 400         regs_buff[6]  = E1000_READ_REG(hw, RDTR);
 401
 402         regs_buff[7]  = E1000_READ_REG(hw, TCTL);
 403         regs_buff[8]  = E1000_READ_REG(hw, TDLEN);
 404         regs_buff[9]  = E1000_READ_REG(hw, TDH);
 405         regs_buff[10] = E1000_READ_REG(hw, TDT);
 406         regs_buff[11] = E1000_READ_REG(hw, TIDV);
 407
 408         regs_buff[12] = adapter->hw.phy_type;  /* PHY type (IGP=1, M88=0) */
 409         if (hw->phy_type == e1000_phy_igp) {
 410                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 411                                     IGP01E1000_PHY_AGC_A);
 412                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
 413                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 414                 regs_buff[13] = (uint32_t)phy_data; /* cable length */
 415                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 416                                     IGP01E1000_PHY_AGC_B);
 417                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
 418                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 419                 regs_buff[14] = (uint32_t)phy_data; /* cable length */
 420                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 421                                     IGP01E1000_PHY_AGC_C);
 422                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
 423                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 424                 regs_buff[15] = (uint32_t)phy_data; /* cable length */
 425                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 426                                     IGP01E1000_PHY_AGC_D);
 427                 e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
 428                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 429                 regs_buff[16] = (uint32_t)phy_data; /* cable length */
 430                 regs_buff[17] = 0; /* extended 10bt distance (not needed) */
 431                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
 432                 e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
 433                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 434                 regs_buff[18] = (uint32_t)phy_data; /* cable polarity */
 435                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 436                                     IGP01E1000_PHY_PCS_INIT_REG);
 437                 e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
 438                                    IGP01E1000_PHY_PAGE_SELECT, &phy_data);
 439                 regs_buff[19] = (uint32_t)phy_data; /* cable polarity */
 440                 regs_buff[20] = 0; /* polarity correction enabled (always) */
 441                 regs_buff[22] = 0; /* phy receive errors (unavailable) */
 442                 regs_buff[23] = regs_buff[18]; /* mdix mode */
 443                 e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
 444         } else {
 445                 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 446                 regs_buff[13] = (uint32_t)phy_data; /* cable length */
 447                 regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 448                 regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 449                 regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 450                 e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
 451                 regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */
 452                 regs_buff[18] = regs_buff[13]; /* cable polarity */
 453                 regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 454                 regs_buff[20] = regs_buff[17]; /* polarity correction */
 455                 /* phy receive errors */
 456                 regs_buff[22] = adapter->phy_stats.receive_errors;
 457                 regs_buff[23] = regs_buff[13]; /* mdix mode */
 458         }
 459         regs_buff[21] = adapter->phy_stats.idle_errors;  /* phy idle errors */
 460         e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
 461         regs_buff[24] = (uint32_t)phy_data;  /* phy local receiver status */
 462         regs_buff[25] = regs_buff[24];  /* phy remote receiver status */
 463         if (hw->mac_type >= e1000_82540 &&
 464            hw->media_type == e1000_media_type_copper) {
 465                 regs_buff[26] = E1000_READ_REG(hw, MANC);
 466         }
 467 }
 468
 469 static int
 470 e1000_get_eeprom_len(struct net_device *netdev)
 471 {
 472         struct e1000_adapter *adapter = netdev_priv(netdev);
 473         return adapter->hw.eeprom.word_size * 2;
 474 }
 475
 476 static int
 477 e1000_get_eeprom(struct net_device *netdev,
 478                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 479 {
 480         struct e1000_adapter *adapter = netdev_priv(netdev);
 481         struct e1000_hw *hw = &adapter->hw;
 482         uint16_t *eeprom_buff;
 483         int first_word, last_word;
 484         int ret_val = 0;
 485         uint16_t i;
 486
 487         if (eeprom->len == 0)
 488                 return -EINVAL;
 489
 490         eeprom->magic = hw->vendor_id | (hw->device_id << 16);
 491
 492         first_word = eeprom->offset >> 1;
 493         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 494
 495         eeprom_buff = kmalloc(sizeof(uint16_t) *
 496                         (last_word - first_word + 1), GFP_KERNEL);
 497         if (!eeprom_buff)
 498                 return -ENOMEM;
 499
 500         if (hw->eeprom.type == e1000_eeprom_spi)
 501                 ret_val = e1000_read_eeprom(hw, first_word,
 502                                             last_word - first_word + 1,
 503                                             eeprom_buff);
 504         else {
 505                 for (i = 0; i < last_word - first_word + 1; i++)
 506                         if ((ret_val = e1000_read_eeprom(hw, first_word + i, 1,
 507                                                         &eeprom_buff[i])))
 508                                 break;
 509         }
 510
 511         /* Device's eeprom is always little-endian, word addressable */
 512         for (i = 0; i < last_word - first_word + 1; i++)
 513                 le16_to_cpus(&eeprom_buff[i]);
 514
 515         memcpy(bytes, (uint8_t *)eeprom_buff + (eeprom->offset & 1),
 516                         eeprom->len);
 517         kfree(eeprom_buff);
 518
 519         return ret_val;
 520 }
 521
 522 static int
 523 e1000_set_eeprom(struct net_device *netdev,
 524                       struct ethtool_eeprom *eeprom, uint8_t *bytes)
 525 {
 526         struct e1000_adapter *adapter = netdev_priv(netdev);
 527         struct e1000_hw *hw = &adapter->hw;
 528         uint16_t *eeprom_buff;
 529         void *ptr;
 530         int max_len, first_word, last_word, ret_val = 0;
 531         uint16_t i;
 532
 533         if (eeprom->len == 0)
 534                 return -EOPNOTSUPP;
 535
 536         if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
 537                 return -EFAULT;
 538
 539         max_len = hw->eeprom.word_size * 2;
 540
 541         first_word = eeprom->offset >> 1;
 542         last_word = (eeprom->offset + eeprom->len - 1) >> 1;
 543         eeprom_buff = kmalloc(max_len, GFP_KERNEL);
 544         if (!eeprom_buff)
 545                 return -ENOMEM;
 546
 547         ptr = (void *)eeprom_buff;
 548
 549         if (eeprom->offset & 1) {
 550                 /* need read/modify/write of first changed EEPROM word */
 551                 /* only the second byte of the word is being modified */
 552                 ret_val = e1000_read_eeprom(hw, first_word, 1,
 553                                             &eeprom_buff[0]);
 554                 ptr++;
 555         }
 556         if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
 557                 /* need read/modify/write of last changed EEPROM word */
 558                 /* only the first byte of the word is being modified */
 559                 ret_val = e1000_read_eeprom(hw, last_word, 1,
 560                                   &eeprom_buff[last_word - first_word]);
 561         }
 562
 563         /* Device's eeprom is always little-endian, word addressable */
 564         for (i = 0; i < last_word - first_word + 1; i++)
 565                 le16_to_cpus(&eeprom_buff[i]);
 566
 567         memcpy(ptr, bytes, eeprom->len);
 568
 569         for (i = 0; i < last_word - first_word + 1; i++)
 570                 eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
 571
 572         ret_val = e1000_write_eeprom(hw, first_word,
 573                                      last_word - first_word + 1, eeprom_buff);
 574
 575         /* Update the checksum over the first part of the EEPROM if needed
 576          * and flush shadow RAM for 82573 conrollers */
 577         if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
 578                                 (hw->mac_type == e1000_82573)))
 579                 e1000_update_eeprom_checksum(hw);
 580
 581         kfree(eeprom_buff);
 582         return ret_val;
 583 }
 584
 585 static void
 586 e1000_get_drvinfo(struct net_device *netdev,
 587                        struct ethtool_drvinfo *drvinfo)
 588 {
 589         struct e1000_adapter *adapter = netdev_priv(netdev);
 590         char firmware_version[32];
 591         uint16_t eeprom_data;
 592
 593         strncpy(drvinfo->driver,  e1000_driver_name, 32);
 594         strncpy(drvinfo->version, e1000_driver_version, 32);
 595
 596         /* EEPROM image version # is reported as firmware version # for
 597          * 8257{1|2|3} controllers */
 598         e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
 599         switch (adapter->hw.mac_type) {
 600         case e1000_82571:
 601         case e1000_82572:
 602         case e1000_82573:
 603         case e1000_80003es2lan:
 604         case e1000_ich8lan:
 605                 sprintf(firmware_version, "%d.%d-%d",
 606                         (eeprom_data & 0xF000) >> 12,
 607                         (eeprom_data & 0x0FF0) >> 4,
 608                         eeprom_data & 0x000F);
 609                 break;
 610         default:
 611                 sprintf(firmware_version, "N/A");
 612         }
 613
 614         strncpy(drvinfo->fw_version, firmware_version, 32);
 615         strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 616         drvinfo->n_stats = E1000_STATS_LEN;
 617         drvinfo->testinfo_len = E1000_TEST_LEN;
 618         drvinfo->regdump_len = e1000_get_regs_len(netdev);
 619         drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
 620 }
 621
 622 static void
 623 e1000_get_ringparam(struct net_device *netdev,
 624                     struct ethtool_ringparam *ring)
 625 {
 626         struct e1000_adapter *adapter = netdev_priv(netdev);
 627         e1000_mac_type mac_type = adapter->hw.mac_type;
 628         struct e1000_tx_ring *txdr = adapter->tx_ring;
 629         struct e1000_rx_ring *rxdr = adapter->rx_ring;
 630
 631         ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
 632                 E1000_MAX_82544_RXD;
 633         ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
 634                 E1000_MAX_82544_TXD;
 635         ring->rx_mini_max_pending = 0;
 636         ring->rx_jumbo_max_pending = 0;
 637         ring->rx_pending = rxdr->count;
 638         ring->tx_pending = txdr->count;
 639         ring->rx_mini_pending = 0;
 640         ring->rx_jumbo_pending = 0;
 641 }
 642
 643 static int
 644 e1000_set_ringparam(struct net_device *netdev,
 645                     struct ethtool_ringparam *ring)
 646 {
 647         struct e1000_adapter *adapter = netdev_priv(netdev);
 648         e1000_mac_type mac_type = adapter->hw.mac_type;
 649         struct e1000_tx_ring *txdr, *tx_old;
 650         struct e1000_rx_ring *rxdr, *rx_old;
 651         int i, err, tx_ring_size, rx_ring_size;
 652
 653         if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 654                 return -EINVAL;
 655
 656         tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
 657         rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
 658
 659         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 660                 msleep(1);
 661
 662         if (netif_running(adapter->netdev))
 663                 e1000_down(adapter);
 664
 665         tx_old = adapter->tx_ring;
 666         rx_old = adapter->rx_ring;
 667
 668         err = -ENOMEM;
 669         txdr = kzalloc(tx_ring_size, GFP_KERNEL);
 670         if (!txdr)
 671                 goto err_alloc_tx;
 672
 673         rxdr = kzalloc(rx_ring_size, GFP_KERNEL);
 674         if (!rxdr)
 675                 goto err_alloc_rx;
 676
 677         adapter->tx_ring = txdr;
 678         adapter->rx_ring = rxdr;
 679
 680         rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD);
 681         rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ?
 682                 E1000_MAX_RXD : E1000_MAX_82544_RXD));
 683         E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 684
 685         txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD);
 686         txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ?
 687                 E1000_MAX_TXD : E1000_MAX_82544_TXD));
 688         E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 689
 690         for (i = 0; i < adapter->num_tx_queues; i++)
 691                 txdr[i].count = txdr->count;
 692         for (i = 0; i < adapter->num_rx_queues; i++)
 693                 rxdr[i].count = rxdr->count;
 694
 695         if (netif_running(adapter->netdev)) {
 696                 /* Try to get new resources before deleting old */
 697                 if ((err = e1000_setup_all_rx_resources(adapter)))
 698                         goto err_setup_rx;
 699                 if ((err = e1000_setup_all_tx_resources(adapter)))
 700                         goto err_setup_tx;
 701
 702                 /* save the new, restore the old in order to free it,
 703                  * then restore the new back again */
 704
 705                 adapter->rx_ring = rx_old;
 706                 adapter->tx_ring = tx_old;
 707                 e1000_free_all_rx_resources(adapter);
 708                 e1000_free_all_tx_resources(adapter);
 709                 kfree(tx_old);
 710                 kfree(rx_old);
 711                 adapter->rx_ring = rxdr;
 712                 adapter->tx_ring = txdr;
 713                 if ((err = e1000_up(adapter)))
 714                         goto err_setup;
 715         }
 716
 717         clear_bit(__E1000_RESETTING, &adapter->flags);
 718         return 0;
 719 err_setup_tx:
 720         e1000_free_all_rx_resources(adapter);
 721 err_setup_rx:
 722         adapter->rx_ring = rx_old;
 723         adapter->tx_ring = tx_old;
 724         kfree(rxdr);
 725 err_alloc_rx:
 726         kfree(txdr);
 727 err_alloc_tx:
 728         e1000_up(adapter);
 729 err_setup:
 730         clear_bit(__E1000_RESETTING, &adapter->flags);
 731         return err;
 732 }
 733
 734 #define REG_PATTERN_TEST(R, M, W)                                              \
 735 {                                                                              \
 736         uint32_t pat, value;                                                   \
 737         uint32_t test[] =                                                      \
 738                 {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};              \
 739         for (pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) {              \
 740                 E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W));             \
 741                 value = E1000_READ_REG(&adapter->hw, R);                       \
 742                 if (value != (test[pat] & W & M)) {                             \
 743                         DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
 744                                 "0x%08X expected 0x%08X\n",                    \
 745                                 E1000_##R, value, (test[pat] & W & M));        \
 746                         *data = (adapter->hw.mac_type < e1000_82543) ?         \
 747                                 E1000_82542_##R : E1000_##R;                   \
 748                         return 1;                                              \
 749                 }                                                              \
 750         }                                                                      \
 751 }
 752
 753 #define REG_SET_AND_CHECK(R, M, W)                                             \
 754 {                                                                              \
 755         uint32_t value;                                                        \
 756         E1000_WRITE_REG(&adapter->hw, R, W & M);                               \
 757         value = E1000_READ_REG(&adapter->hw, R);                               \
 758         if ((W & M) != (value & M)) {                                          \
 759                 DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
 760                         "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
 761                 *data = (adapter->hw.mac_type < e1000_82543) ?                 \
 762                         E1000_82542_##R : E1000_##R;                           \
 763                 return 1;                                                      \
 764         }                                                                      \
 765 }
 766
 767 static int
 768 e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
 769 {
 770         uint32_t value, before, after;
 771         uint32_t i, toggle;
 772
 773         /* The status register is Read Only, so a write should fail.
 774          * Some bits that get toggled are ignored.
 775          */
 776         switch (adapter->hw.mac_type) {
 777         /* there are several bits on newer hardware that are r/w */
 778         case e1000_82571:
 779         case e1000_82572:
 780         case e1000_80003es2lan:
 781                 toggle = 0x7FFFF3FF;
 782                 break;
 783         case e1000_82573:
 784         case e1000_ich8lan:
 785                 toggle = 0x7FFFF033;
 786                 break;
 787         default:
 788                 toggle = 0xFFFFF833;
 789                 break;
 790         }
 791
 792         before = E1000_READ_REG(&adapter->hw, STATUS);
 793         value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle);
 794         E1000_WRITE_REG(&adapter->hw, STATUS, toggle);
 795         after = E1000_READ_REG(&adapter->hw, STATUS) & toggle;
 796         if (value != after) {
 797                 DPRINTK(DRV, ERR, "failed STATUS register test got: "
 798                         "0x%08X expected: 0x%08X\n", after, value);
 799                 *data = 1;
 800                 return 1;
 801         }
 802         /* restore previous status */
 803         E1000_WRITE_REG(&adapter->hw, STATUS, before);
 804         if (adapter->hw.mac_type != e1000_ich8lan) {
 805                 REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 806                 REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
 807                 REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
 808                 REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
 809         }
 810         REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 811         REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 812         REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
 813         REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
 814         REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
 815         REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
 816         REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
 817         REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
 818         REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 819         REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
 820
 821         REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
 822         before = (adapter->hw.mac_type == e1000_ich8lan ?
 823                         0x06C3B33E : 0x06DFB3FE);
 824         REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 825         REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 826
 827         if (adapter->hw.mac_type >= e1000_82543) {
 828
 829                 REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 830                 REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 831                 if (adapter->hw.mac_type != e1000_ich8lan)
 832                         REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 833                 REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 834                 REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
 835                 value = (adapter->hw.mac_type == e1000_ich8lan ?
 836                                 E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
 837                 for (i = 0; i < value; i++) {
 838                         REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 839                                          0xFFFFFFFF);
 840                 }
 841
 842         } else {
 843
 844                 REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
 845                 REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
 846                 REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
 847                 REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
 848
 849         }
 850
 851         value = (adapter->hw.mac_type == e1000_ich8lan ?
 852                         E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
 853         for (i = 0; i < value; i++)
 854                 REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 855
 856         *data = 0;
 857         return 0;
 858 }
 859
 860 static int
 861 e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data)
 862 {
 863         uint16_t temp;
 864         uint16_t checksum = 0;
 865         uint16_t i;
 866
 867         *data = 0;
 868         /* Read and add up the contents of the EEPROM */
 869         for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
 870                 if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) {
 871                         *data = 1;
 872                         break;
 873                 }
 874                 checksum += temp;
 875         }
 876
 877         /* If Checksum is not Correct return error else test passed */
 878         if ((checksum != (uint16_t) EEPROM_SUM) && !(*data))
 879                 *data = 2;
 880
 881         return *data;
 882 }
 883
 884 static irqreturn_t
 885 e1000_test_intr(int irq,
 886                 void *data)
 887 {
 888         struct net_device *netdev = (struct net_device *) data;
 889         struct e1000_adapter *adapter = netdev_priv(netdev);
 890
 891         adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR);
 892
 893         return IRQ_HANDLED;
 894 }
 895
 896 static int
 897 e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 898 {
 899         struct net_device *netdev = adapter->netdev;
 900         uint32_t mask, i=0, shared_int = TRUE;
 901         uint32_t irq = adapter->pdev->irq;
 902
 903         *data = 0;
 904
 905         /* NOTE: we don't test MSI interrupts here, yet */
 906         /* Hook up test interrupt handler just for this test */
 907         if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
 908                          netdev->name, netdev))
 909                 shared_int = FALSE;
 910         else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
 911                               netdev->name, netdev)) {
 912                 *data = 1;
 913                 return -1;
 914         }
 915         DPRINTK(HW, INFO, "testing %s interrupt\n",
 916                 (shared_int ? "shared" : "unshared"));
 917
 918         /* Disable all the interrupts */
 919         E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
 920         msleep(10);
 921
 922         /* Test each interrupt */
 923         for (; i < 10; i++) {
 924
 925                 if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
 926                         continue;
 927                 /* Interrupt to test */
 928                 mask = 1 << i;
 929
 930                 if (!shared_int) {
 931                         /* Disable the interrupt to be reported in
 932                          * the cause register and then force the same
 933                          * interrupt and see if one gets posted.  If
 934                          * an interrupt was posted to the bus, the
 935                          * test failed.
 936                          */
 937                         adapter->test_icr = 0;
 938                         E1000_WRITE_REG(&adapter->hw, IMC, mask);
 939                         E1000_WRITE_REG(&adapter->hw, ICS, mask);
 940                         msleep(10);
 941
 942                         if (adapter->test_icr & mask) {
 943                                 *data = 3;
 944                                 break;
 945                         }
 946                 }
 947
 948                 /* Enable the interrupt to be reported in
 949                  * the cause register and then force the same
 950                  * interrupt and see if one gets posted.  If
 951                  * an interrupt was not posted to the bus, the
 952                  * test failed.
 953                  */
 954                 adapter->test_icr = 0;
 955                 E1000_WRITE_REG(&adapter->hw, IMS, mask);
 956                 E1000_WRITE_REG(&adapter->hw, ICS, mask);
 957                 msleep(10);
 958
 959                 if (!(adapter->test_icr & mask)) {
 960                         *data = 4;
 961                         break;
 962                 }
 963
 964                 if (!shared_int) {
 965                         /* Disable the other interrupts to be reported in
 966                          * the cause register and then force the other
 967                          * interrupts and see if any get posted.  If
 968                          * an interrupt was posted to the bus, the
 969                          * test failed.
 970                          */
 971                         adapter->test_icr = 0;
 972                         E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF);
 973                         E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF);
 974                         msleep(10);
 975
 976                         if (adapter->test_icr) {
 977                                 *data = 5;
 978                                 break;
 979                         }
 980                 }
 981         }
 982
 983         /* Disable all the interrupts */
 984         E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
 985         msleep(10);
 986
 987         /* Unhook test interrupt handler */
 988         free_irq(irq, netdev);
 989
 990         return *data;
 991 }
 992
 993 static void
 994 e1000_free_desc_rings(struct e1000_adapter *adapter)
 995 {
 996         struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 997         struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
 998         struct pci_dev *pdev = adapter->pdev;
 999         int i;
1000
1001         if (txdr->desc && txdr->buffer_info) {
1002                 for (i = 0; i < txdr->count; i++) {
1003                         if (txdr->buffer_info[i].dma)
1004                                 pci_unmap_single(pdev, txdr->buffer_info[i].dma,
1005                                                  txdr->buffer_info[i].length,
1006                                                  PCI_DMA_TODEVICE);
1007                         if (txdr->buffer_info[i].skb)
1008                                 dev_kfree_skb(txdr->buffer_info[i].skb);
1009                 }
1010         }
1011
1012         if (rxdr->desc && rxdr->buffer_info) {
1013                 for (i = 0; i < rxdr->count; i++) {
1014                         if (rxdr->buffer_info[i].dma)
1015                                 pci_unmap_single(pdev, rxdr->buffer_info[i].dma,
1016                                                  rxdr->buffer_info[i].length,
1017                                                  PCI_DMA_FROMDEVICE);
1018                         if (rxdr->buffer_info[i].skb)
1019                                 dev_kfree_skb(rxdr->buffer_info[i].skb);
1020                 }
1021         }
1022
1023         if (txdr->desc) {
1024                 pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma);
1025                 txdr->desc = NULL;
1026         }
1027         if (rxdr->desc) {
1028                 pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
1029                 rxdr->desc = NULL;
1030         }
1031
1032         kfree(txdr->buffer_info);
1033         txdr->buffer_info = NULL;
1034         kfree(rxdr->buffer_info);
1035         rxdr->buffer_info = NULL;
1036
1037         return;
1038 }
1039
1040 static int
1041 e1000_setup_desc_rings(struct e1000_adapter *adapter)
1042 {
1043         struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
1044         struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
1045         struct pci_dev *pdev = adapter->pdev;
1046         uint32_t rctl;
1047         int size, i, ret_val;
1048
1049         /* Setup Tx descriptor ring and Tx buffers */
1050
1051         if (!txdr->count)
1052                 txdr->count = E1000_DEFAULT_TXD;
1053
1054         size = txdr->count * sizeof(struct e1000_buffer);
1055         if (!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
1056                 ret_val = 1;
1057                 goto err_nomem;
1058         }
1059         memset(txdr->buffer_info, 0, size);
1060
1061         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1062         E1000_ROUNDUP(txdr->size, 4096);
1063         if (!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) {
1064                 ret_val = 2;
1065                 goto err_nomem;
1066         }
1067         memset(txdr->desc, 0, txdr->size);
1068         txdr->next_to_use = txdr->next_to_clean = 0;
1069
1070         E1000_WRITE_REG(&adapter->hw, TDBAL,
1071                         ((uint64_t) txdr->dma & 0x00000000FFFFFFFF));
1072         E1000_WRITE_REG(&adapter->hw, TDBAH, ((uint64_t) txdr->dma >> 32));
1073         E1000_WRITE_REG(&adapter->hw, TDLEN,
1074                         txdr->count * sizeof(struct e1000_tx_desc));
1075         E1000_WRITE_REG(&adapter->hw, TDH, 0);
1076         E1000_WRITE_REG(&adapter->hw, TDT, 0);
1077         E1000_WRITE_REG(&adapter->hw, TCTL,
1078                         E1000_TCTL_PSP | E1000_TCTL_EN |
1079                         E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
1080                         E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
1081
1082         for (i = 0; i < txdr->count; i++) {
1083                 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
1084                 struct sk_buff *skb;
1085                 unsigned int size = 1024;
1086
1087                 if (!(skb = alloc_skb(size, GFP_KERNEL))) {
1088                         ret_val = 3;
1089                         goto err_nomem;
1090                 }
1091                 skb_put(skb, size);
1092                 txdr->buffer_info[i].skb = skb;
1093                 txdr->buffer_info[i].length = skb->len;
1094                 txdr->buffer_info[i].dma =
1095                         pci_map_single(pdev, skb->data, skb->len,
1096                                        PCI_DMA_TODEVICE);
1097                 tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
1098                 tx_desc->lower.data = cpu_to_le32(skb->len);
1099                 tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
1100                                                    E1000_TXD_CMD_IFCS |
1101                                                    E1000_TXD_CMD_RPS);
1102                 tx_desc->upper.data = 0;
1103         }
1104
1105         /* Setup Rx descriptor ring and Rx buffers */
1106
1107         if (!rxdr->count)
1108                 rxdr->count = E1000_DEFAULT_RXD;
1109
1110         size = rxdr->count * sizeof(struct e1000_buffer);
1111         if (!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
1112                 ret_val = 4;
1113                 goto err_nomem;
1114         }
1115         memset(rxdr->buffer_info, 0, size);
1116
1117         rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
1118         if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
1119                 ret_val = 5;
1120                 goto err_nomem;
1121         }
1122         memset(rxdr->desc, 0, rxdr->size);
1123         rxdr->next_to_use = rxdr->next_to_clean = 0;
1124
1125         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1126         E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
1127         E1000_WRITE_REG(&adapter->hw, RDBAL,
1128                         ((uint64_t) rxdr->dma & 0xFFFFFFFF));
1129         E1000_WRITE_REG(&adapter->hw, RDBAH, ((uint64_t) rxdr->dma >> 32));
1130         E1000_WRITE_REG(&adapter->hw, RDLEN, rxdr->size);
1131         E1000_WRITE_REG(&adapter->hw, RDH, 0);
1132         E1000_WRITE_REG(&adapter->hw, RDT, 0);
1133         rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
1134                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1135                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1136         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1137
1138         for (i = 0; i < rxdr->count; i++) {
1139                 struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
1140                 struct sk_buff *skb;
1141
1142                 if (!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
1143                                 GFP_KERNEL))) {
1144                         ret_val = 6;
1145                         goto err_nomem;
1146                 }
1147                 skb_reserve(skb, NET_IP_ALIGN);
1148                 rxdr->buffer_info[i].skb = skb;
1149                 rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
1150                 rxdr->buffer_info[i].dma =
1151                         pci_map_single(pdev, skb->data, E1000_RXBUFFER_2048,
1152                                        PCI_DMA_FROMDEVICE);
1153                 rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
1154                 memset(skb->data, 0x00, skb->len);
1155         }
1156
1157         return 0;
1158
1159 err_nomem:
1160         e1000_free_desc_rings(adapter);
1161         return ret_val;
1162 }
1163
1164 static void
1165 e1000_phy_disable_receiver(struct e1000_adapter *adapter)
1166 {
1167         /* Write out to PHY registers 29 and 30 to disable the Receiver. */
1168         e1000_write_phy_reg(&adapter->hw, 29, 0x001F);
1169         e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC);
1170         e1000_write_phy_reg(&adapter->hw, 29, 0x001A);
1171         e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0);
1172 }
1173
1174 static void
1175 e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
1176 {
1177         uint16_t phy_reg;
1178
1179         /* Because we reset the PHY above, we need to re-force TX_CLK in the
1180          * Extended PHY Specific Control Register to 25MHz clock.  This
1181          * value defaults back to a 2.5MHz clock when the PHY is reset.
1182          */
1183         e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
1184         phy_reg |= M88E1000_EPSCR_TX_CLK_25;
1185         e1000_write_phy_reg(&adapter->hw,
1186                 M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
1187
1188         /* In addition, because of the s/w reset above, we need to enable
1189          * CRS on TX.  This must be set for both full and half duplex
1190          * operation.
1191          */
1192         e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
1193         phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
1194         e1000_write_phy_reg(&adapter->hw,
1195                 M88E1000_PHY_SPEC_CTRL, phy_reg);
1196 }
1197
1198 static int
1199 e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
1200 {
1201         uint32_t ctrl_reg;
1202         uint16_t phy_reg;
1203
1204         /* Setup the Device Control Register for PHY loopback test. */
1205
1206         ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
1207         ctrl_reg |= (E1000_CTRL_ILOS |          /* Invert Loss-Of-Signal */
1208                      E1000_CTRL_FRCSPD |        /* Set the Force Speed Bit */
1209                      E1000_CTRL_FRCDPX |        /* Set the Force Duplex Bit */
1210                      E1000_CTRL_SPD_1000 |      /* Force Speed to 1000 */
1211                      E1000_CTRL_FD);            /* Force Duplex to FULL */
1212
1213         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
1214
1215         /* Read the PHY Specific Control Register (0x10) */
1216         e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
1217
1218         /* Clear Auto-Crossover bits in PHY Specific Control Register
1219          * (bits 6:5).
1220          */
1221         phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
1222         e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
1223
1224         /* Perform software reset on the PHY */
1225         e1000_phy_reset(&adapter->hw);
1226
1227         /* Have to setup TX_CLK and TX_CRS after software reset */
1228         e1000_phy_reset_clk_and_crs(adapter);
1229
1230         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8100);
1231
1232         /* Wait for reset to complete. */
1233         udelay(500);
1234
1235         /* Have to setup TX_CLK and TX_CRS after software reset */
1236         e1000_phy_reset_clk_and_crs(adapter);
1237
1238         /* Write out to PHY registers 29 and 30 to disable the Receiver. */
1239         e1000_phy_disable_receiver(adapter);
1240
1241         /* Set the loopback bit in the PHY control register. */
1242         e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1243         phy_reg |= MII_CR_LOOPBACK;
1244         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
1245
1246         /* Setup TX_CLK and TX_CRS one more time. */
1247         e1000_phy_reset_clk_and_crs(adapter);
1248
1249         /* Check Phy Configuration */
1250         e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1251         if (phy_reg != 0x4100)
1252                  return 9;
1253
1254         e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
1255         if (phy_reg != 0x0070)
1256                 return 10;
1257
1258         e1000_read_phy_reg(&adapter->hw, 29, &phy_reg);
1259         if (phy_reg != 0x001A)
1260                 return 11;
1261
1262         return 0;
1263 }
1264
1265 static int
1266 e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
1267 {
1268         uint32_t ctrl_reg = 0;
1269         uint32_t stat_reg = 0;
1270
1271         adapter->hw.autoneg = FALSE;
1272
1273         if (adapter->hw.phy_type == e1000_phy_m88) {
1274                 /* Auto-MDI/MDIX Off */
1275                 e1000_write_phy_reg(&adapter->hw,
1276                                     M88E1000_PHY_SPEC_CTRL, 0x0808);
1277                 /* reset to update Auto-MDI/MDIX */
1278                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
1279                 /* autoneg off */
1280                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
1281         } else if (adapter->hw.phy_type == e1000_phy_gg82563)
1282                 e1000_write_phy_reg(&adapter->hw,
1283                                     GG82563_PHY_KMRN_MODE_CTRL,
1284                                     0x1CC);
1285
1286         ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
1287
1288         if (adapter->hw.phy_type == e1000_phy_ife) {
1289                 /* force 100, set loopback */
1290                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
1291
1292                 /* Now set up the MAC to the same speed/duplex as the PHY. */
1293                 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
1294                 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
1295                              E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
1296                              E1000_CTRL_SPD_100 |/* Force Speed to 100 */
1297                              E1000_CTRL_FD);     /* Force Duplex to FULL */
1298         } else {
1299                 /* force 1000, set loopback */
1300                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
1301
1302                 /* Now set up the MAC to the same speed/duplex as the PHY. */
1303                 ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
1304                 ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
1305                 ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
1306                              E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
1307                              E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
1308                              E1000_CTRL_FD);     /* Force Duplex to FULL */
1309         }
1310
1311         if (adapter->hw.media_type == e1000_media_type_copper &&
1312            adapter->hw.phy_type == e1000_phy_m88)
1313                 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
1314         else {
1315                 /* Set the ILOS bit on the fiber Nic is half
1316                  * duplex link is detected. */
1317                 stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
1318                 if ((stat_reg & E1000_STATUS_FD) == 0)
1319                         ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
1320         }
1321
1322         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
1323
1324         /* Disable the receiver on the PHY so when a cable is plugged in, the
1325          * PHY does not begin to autoneg when a cable is reconnected to the NIC.
1326          */
1327         if (adapter->hw.phy_type == e1000_phy_m88)
1328                 e1000_phy_disable_receiver(adapter);
1329
1330         udelay(500);
1331
1332         return 0;
1333 }
1334
1335 static int
1336 e1000_set_phy_loopback(struct e1000_adapter *adapter)
1337 {
1338         uint16_t phy_reg = 0;
1339         uint16_t count = 0;
1340
1341         switch (adapter->hw.mac_type) {
1342         case e1000_82543:
1343                 if (adapter->hw.media_type == e1000_media_type_copper) {
1344                         /* Attempt to setup Loopback mode on Non-integrated PHY.
1345                          * Some PHY registers get corrupted at random, so
1346                          * attempt this 10 times.
1347                          */
1348                         while (e1000_nonintegrated_phy_loopback(adapter) &&
1349                               count++ < 10);
1350                         if (count < 11)
1351                                 return 0;
1352                 }
1353                 break;
1354
1355         case e1000_82544:
1356         case e1000_82540:
1357         case e1000_82545:
1358         case e1000_82545_rev_3:
1359         case e1000_82546:
1360         case e1000_82546_rev_3:
1361         case e1000_82541:
1362         case e1000_82541_rev_2:
1363         case e1000_82547:
1364         case e1000_82547_rev_2:
1365         case e1000_82571:
1366         case e1000_82572:
1367         case e1000_82573:
1368         case e1000_80003es2lan:
1369         case e1000_ich8lan:
1370                 return e1000_integrated_phy_loopback(adapter);
1371                 break;
1372
1373         default:
1374                 /* Default PHY loopback work is to read the MII
1375                  * control register and assert bit 14 (loopback mode).
1376                  */
1377                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
1378                 phy_reg |= MII_CR_LOOPBACK;
1379                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
1380                 return 0;
1381                 break;
1382         }
1383
1384         return 8;
1385 }
1386
1387 static int
1388 e1000_setup_loopback_test(struct e1000_adapter *adapter)
1389 {
1390         struct e1000_hw *hw = &adapter->hw;
1391         uint32_t rctl;
1392
1393         if (hw->media_type == e1000_media_type_fiber ||
1394             hw->media_type == e1000_media_type_internal_serdes) {
1395                 switch (hw->mac_type) {
1396                 case e1000_82545:
1397                 case e1000_82546:
1398                 case e1000_82545_rev_3:
1399                 case e1000_82546_rev_3:
1400                         return e1000_set_phy_loopback(adapter);
1401                         break;
1402                 case e1000_82571:
1403                 case e1000_82572:
1404 #define E1000_SERDES_LB_ON 0x410
1405                         e1000_set_phy_loopback(adapter);
1406                         E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
1407                         msleep(10);
1408                         return 0;
1409                         break;
1410                 default:
1411                         rctl = E1000_READ_REG(hw, RCTL);
1412                         rctl |= E1000_RCTL_LBM_TCVR;
1413                         E1000_WRITE_REG(hw, RCTL, rctl);
1414                         return 0;
1415                 }
1416         } else if (hw->media_type == e1000_media_type_copper)
1417                 return e1000_set_phy_loopback(adapter);
1418
1419         return 7;
1420 }
1421
1422 static void
1423 e1000_loopback_cleanup(struct e1000_adapter *adapter)
1424 {
1425         struct e1000_hw *hw = &adapter->hw;
1426         uint32_t rctl;
1427         uint16_t phy_reg;
1428
1429         rctl = E1000_READ_REG(hw, RCTL);
1430         rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
1431         E1000_WRITE_REG(hw, RCTL, rctl);
1432
1433         switch (hw->mac_type) {
1434         case e1000_82571:
1435         case e1000_82572:
1436                 if (hw->media_type == e1000_media_type_fiber ||
1437                     hw->media_type == e1000_media_type_internal_serdes) {
1438 #define E1000_SERDES_LB_OFF 0x400
1439                         E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
1440                         msleep(10);
1441                         break;
1442                 }
1443                 /* Fall Through */
1444         case e1000_82545:
1445         case e1000_82546:
1446         case e1000_82545_rev_3:
1447         case e1000_82546_rev_3:
1448         default:
1449                 hw->autoneg = TRUE;
1450                 if (hw->phy_type == e1000_phy_gg82563)
1451                         e1000_write_phy_reg(hw,
1452                                             GG82563_PHY_KMRN_MODE_CTRL,
1453                                             0x180);
1454                 e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
1455                 if (phy_reg & MII_CR_LOOPBACK) {
1456                         phy_reg &= ~MII_CR_LOOPBACK;
1457                         e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
1458                         e1000_phy_reset(hw);
1459                 }
1460                 break;
1461         }
1462 }
1463
1464 static void
1465 e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
1466 {
1467         memset(skb->data, 0xFF, frame_size);
1468         frame_size &= ~1;
1469         memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
1470         memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
1471         memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
1472 }
1473
1474 static int
1475 e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
1476 {
1477         frame_size &= ~1;
1478         if (*(skb->data + 3) == 0xFF) {
1479                 if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
1480                    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
1481                         return 0;
1482                 }
1483         }
1484         return 13;
1485 }
1486
1487 static int
1488 e1000_run_loopback_test(struct e1000_adapter *adapter)
1489 {
1490         struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
1491         struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
1492         struct pci_dev *pdev = adapter->pdev;
1493         int i, j, k, l, lc, good_cnt, ret_val=0;
1494         unsigned long time;
1495
1496         E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
1497
1498         /* Calculate the loop count based on the largest descriptor ring
1499          * The idea is to wrap the largest ring a number of times using 64
1500          * send/receive pairs during each loop
1501          */
1502
1503         if (rxdr->count <= txdr->count)
1504                 lc = ((txdr->count / 64) * 2) + 1;
1505         else
1506                 lc = ((rxdr->count / 64) * 2) + 1;
1507
1508         k = l = 0;
1509         for (j = 0; j <= lc; j++) { /* loop count loop */
1510                 for (i = 0; i < 64; i++) { /* send the packets */
1511                         e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
1512                                         1024);
1513                         pci_dma_sync_single_for_device(pdev,
1514                                         txdr->buffer_info[k].dma,
1515                                         txdr->buffer_info[k].length,
1516                                         PCI_DMA_TODEVICE);
1517                         if (unlikely(++k == txdr->count)) k = 0;
1518                 }
1519                 E1000_WRITE_REG(&adapter->hw, TDT, k);
1520                 msleep(200);
1521                 time = jiffies; /* set the start time for the receive */
1522                 good_cnt = 0;
1523                 do { /* receive the sent packets */
1524                         pci_dma_sync_single_for_cpu(pdev,
1525                                         rxdr->buffer_info[l].dma,
1526                                         rxdr->buffer_info[l].length,
1527                                         PCI_DMA_FROMDEVICE);
1528
1529                         ret_val = e1000_check_lbtest_frame(
1530                                         rxdr->buffer_info[l].skb,
1531                                         1024);
1532                         if (!ret_val)
1533                                 good_cnt++;
1534                         if (unlikely(++l == rxdr->count)) l = 0;
1535                         /* time + 20 msecs (200 msecs on 2.4) is more than
1536                          * enough time to complete the receives, if it's
1537                          * exceeded, break and error off
1538                          */
1539                 } while (good_cnt < 64 && jiffies < (time + 20));
1540                 if (good_cnt != 64) {
1541                         ret_val = 13; /* ret_val is the same as mis-compare */
1542                         break;
1543                 }
1544                 if (jiffies >= (time + 2)) {
1545                         ret_val = 14; /* error code for time out error */
1546                         break;
1547                 }
1548         } /* end loop count loop */
1549         return ret_val;
1550 }
1551
1552 static int
1553 e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data)
1554 {
1555         /* PHY loopback cannot be performed if SoL/IDER
1556          * sessions are active */
1557         if (e1000_check_phy_reset_block(&adapter->hw)) {
1558                 DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
1559                         "when SoL/IDER is active.\n");
1560                 *data = 0;
1561                 goto out;
1562         }
1563
1564         if ((*data = e1000_setup_desc_rings(adapter)))
1565                 goto out;
1566         if ((*data = e1000_setup_loopback_test(adapter)))
1567                 goto err_loopback;
1568         *data = e1000_run_loopback_test(adapter);
1569         e1000_loopback_cleanup(adapter);
1570
1571 err_loopback:
1572         e1000_free_desc_rings(adapter);
1573 out:
1574         return *data;
1575 }
1576
1577 static int
1578 e1000_link_test(struct e1000_adapter *adapter, uint64_t *data)
1579 {
1580         *data = 0;
1581         if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
1582                 int i = 0;
1583                 adapter->hw.serdes_link_down = TRUE;
1584
1585                 /* On some blade server designs, link establishment
1586                  * could take as long as 2-3 minutes */
1587                 do {
1588                         e1000_check_for_link(&adapter->hw);
1589                         if (adapter->hw.serdes_link_down == FALSE)
1590                                 return *data;
1591                         msleep(20);
1592                 } while (i++ < 3750);
1593
1594                 *data = 1;
1595         } else {
1596                 e1000_check_for_link(&adapter->hw);
1597                 if (adapter->hw.autoneg)  /* if auto_neg is set wait for it */
1598                         msleep(4000);
1599
1600                 if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
1601                         *data = 1;
1602                 }
1603         }
1604         return *data;
1605 }
1606
1607 static int
1608 e1000_diag_test_count(struct net_device *netdev)
1609 {
1610         return E1000_TEST_LEN;
1611 }
1612
1613 extern void e1000_power_up_phy(struct e1000_adapter *);
1614
1615 static void
1616 e1000_diag_test(struct net_device *netdev,
1617                    struct ethtool_test *eth_test, uint64_t *data)
1618 {
1619         struct e1000_adapter *adapter = netdev_priv(netdev);
1620         boolean_t if_running = netif_running(netdev);
1621
1622         set_bit(__E1000_TESTING, &adapter->flags);
1623         if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
1624                 /* Offline tests */
1625
1626                 /* save speed, duplex, autoneg settings */
1627                 uint16_t autoneg_advertised = adapter->hw.autoneg_advertised;
1628                 uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex;
1629                 uint8_t autoneg = adapter->hw.autoneg;
1630
1631                 DPRINTK(HW, INFO, "offline testing starting\n");
1632
1633                 /* Link test performed before hardware reset so autoneg doesn't
1634                  * interfere with test result */
1635                 if (e1000_link_test(adapter, &data[4]))
1636                         eth_test->flags |= ETH_TEST_FL_FAILED;
1637
1638                 if (if_running)
1639                         /* indicate we're in test mode */
1640                         dev_close(netdev);
1641                 else
1642                         e1000_reset(adapter);
1643
1644                 if (e1000_reg_test(adapter, &data[0]))
1645                         eth_test->flags |= ETH_TEST_FL_FAILED;
1646
1647                 e1000_reset(adapter);
1648                 if (e1000_eeprom_test(adapter, &data[1]))
1649                         eth_test->flags |= ETH_TEST_FL_FAILED;
1650
1651                 e1000_reset(adapter);
1652                 if (e1000_intr_test(adapter, &data[2]))
1653                         eth_test->flags |= ETH_TEST_FL_FAILED;
1654
1655                 e1000_reset(adapter);
1656                 /* make sure the phy is powered up */
1657                 e1000_power_up_phy(adapter);
1658                 if (e1000_loopback_test(adapter, &data[3]))
1659                         eth_test->flags |= ETH_TEST_FL_FAILED;
1660
1661                 /* restore speed, duplex, autoneg settings */
1662                 adapter->hw.autoneg_advertised = autoneg_advertised;
1663                 adapter->hw.forced_speed_duplex = forced_speed_duplex;
1664                 adapter->hw.autoneg = autoneg;
1665
1666                 e1000_reset(adapter);
1667                 clear_bit(__E1000_TESTING, &adapter->flags);
1668                 if (if_running)
1669                         dev_open(netdev);
1670         } else {
1671                 DPRINTK(HW, INFO, "online testing starting\n");
1672                 /* Online tests */
1673                 if (e1000_link_test(adapter, &data[4]))
1674                         eth_test->flags |= ETH_TEST_FL_FAILED;
1675
1676                 /* Offline tests aren't run; pass by default */
1677                 data[0] = 0;
1678                 data[1] = 0;
1679                 data[2] = 0;
1680                 data[3] = 0;
1681
1682                 clear_bit(__E1000_TESTING, &adapter->flags);
1683         }
1684         msleep_interruptible(4 * 1000);
1685 }
1686
1687 static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
1688 {
1689         struct e1000_hw *hw = &adapter->hw;
1690         int retval = 1; /* fail by default */
1691
1692         switch (hw->device_id) {
1693         case E1000_DEV_ID_82543GC_FIBER:
1694         case E1000_DEV_ID_82543GC_COPPER:
1695         case E1000_DEV_ID_82544EI_FIBER:
1696         case E1000_DEV_ID_82546EB_QUAD_COPPER:
1697         case E1000_DEV_ID_82545EM_FIBER:
1698         case E1000_DEV_ID_82545EM_COPPER:
1699         case E1000_DEV_ID_82546GB_QUAD_COPPER:
1700         case E1000_DEV_ID_82546GB_PCIE:
1701                 /* these don't support WoL at all */
1702                 wol->supported = 0;
1703                 break;
1704         case E1000_DEV_ID_82546EB_FIBER:
1705         case E1000_DEV_ID_82546GB_FIBER:
1706         case E1000_DEV_ID_82571EB_FIBER:
1707         case E1000_DEV_ID_82571EB_SERDES:
1708         case E1000_DEV_ID_82571EB_COPPER:
1709                 /* Wake events not supported on port B */
1710                 if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
1711                         wol->supported = 0;
1712                         break;
1713                 }
1714                 /* return success for non excluded adapter ports */
1715                 retval = 0;
1716                 break;
1717         case E1000_DEV_ID_82571EB_QUAD_COPPER:
1718         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1719                 /* quad port adapters only support WoL on port A */
1720                 if (!adapter->quad_port_a) {
1721                         wol->supported = 0;
1722                         break;
1723                 }
1724                 /* return success for non excluded adapter ports */
1725                 retval = 0;
1726                 break;
1727         default:
1728                 /* dual port cards only support WoL on port A from now on
1729                  * unless it was enabled in the eeprom for port B
1730                  * so exclude FUNC_1 ports from having WoL enabled */
1731                 if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 &&
1732                     !adapter->eeprom_wol) {
1733                         wol->supported = 0;
1734                         break;
1735                 }
1736
1737                 retval = 0;
1738         }
1739
1740         return retval;
1741 }
1742
1743 static void
1744 e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
1745 {
1746         struct e1000_adapter *adapter = netdev_priv(netdev);
1747
1748         wol->supported = WAKE_UCAST | WAKE_MCAST |
1749                          WAKE_BCAST | WAKE_MAGIC;
1750         wol->wolopts = 0;
1751
1752         /* this function will set ->supported = 0 and return 1 if wol is not
1753          * supported by this hardware */
1754         if (e1000_wol_exclusion(adapter, wol))
1755                 return;
1756
1757         /* apply any specific unsupported masks here */
1758         switch (adapter->hw.device_id) {
1759         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1760                 /* KSP3 does not suppport UCAST wake-ups */
1761                 wol->supported &= ~WAKE_UCAST;
1762
1763                 if (adapter->wol & E1000_WUFC_EX)
1764                         DPRINTK(DRV, ERR, "Interface does not support "
1765                         "directed (unicast) frame wake-up packets\n");
1766                 break;
1767         default:
1768                 break;
1769         }
1770
1771         if (adapter->wol & E1000_WUFC_EX)
1772                 wol->wolopts |= WAKE_UCAST;
1773         if (adapter->wol & E1000_WUFC_MC)
1774                 wol->wolopts |= WAKE_MCAST;
1775         if (adapter->wol & E1000_WUFC_BC)
1776                 wol->wolopts |= WAKE_BCAST;
1777         if (adapter->wol & E1000_WUFC_MAG)
1778                 wol->wolopts |= WAKE_MAGIC;
1779
1780         return;
1781 }
1782
1783 static int
1784 e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
1785 {
1786         struct e1000_adapter *adapter = netdev_priv(netdev);
1787         struct e1000_hw *hw = &adapter->hw;
1788
1789         if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
1790                 return -EOPNOTSUPP;
1791
1792         if (e1000_wol_exclusion(adapter, wol))
1793                 return wol->wolopts ? -EOPNOTSUPP : 0;
1794
1795         switch (hw->device_id) {
1796         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1797                 if (wol->wolopts & WAKE_UCAST) {
1798                         DPRINTK(DRV, ERR, "Interface does not support "
1799                         "directed (unicast) frame wake-up packets\n");
1800                         return -EOPNOTSUPP;
1801                 }
1802                 break;
1803         default:
1804                 break;
1805         }
1806
1807         /* these settings will always override what we currently have */
1808         adapter->wol = 0;
1809
1810         if (wol->wolopts & WAKE_UCAST)
1811                 adapter->wol |= E1000_WUFC_EX;
1812         if (wol->wolopts & WAKE_MCAST)
1813                 adapter->wol |= E1000_WUFC_MC;
1814         if (wol->wolopts & WAKE_BCAST)
1815                 adapter->wol |= E1000_WUFC_BC;
1816         if (wol->wolopts & WAKE_MAGIC)
1817                 adapter->wol |= E1000_WUFC_MAG;
1818
1819         return 0;
1820 }
1821
1822 /* toggle LED 4 times per second = 2 "blinks" per second */
1823 #define E1000_ID_INTERVAL       (HZ/4)
1824
1825 /* bit defines for adapter->led_status */
1826 #define E1000_LED_ON            0
1827
1828 static void
1829 e1000_led_blink_callback(unsigned long data)
1830 {
1831         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
1832
1833         if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
1834                 e1000_led_off(&adapter->hw);
1835         else
1836                 e1000_led_on(&adapter->hw);
1837
1838         mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
1839 }
1840
1841 static int
1842 e1000_phys_id(struct net_device *netdev, uint32_t data)
1843 {
1844         struct e1000_adapter *adapter = netdev_priv(netdev);
1845
1846         if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
1847                 data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
1848
1849         if (adapter->hw.mac_type < e1000_82571) {
1850                 if (!adapter->blink_timer.function) {
1851                         init_timer(&adapter->blink_timer);
1852                         adapter->blink_timer.function = e1000_led_blink_callback;
1853                         adapter->blink_timer.data = (unsigned long) adapter;
1854                 }
1855                 e1000_setup_led(&adapter->hw);
1856                 mod_timer(&adapter->blink_timer, jiffies);
1857                 msleep_interruptible(data * 1000);
1858                 del_timer_sync(&adapter->blink_timer);
1859         } else if (adapter->hw.phy_type == e1000_phy_ife) {
1860                 if (!adapter->blink_timer.function) {
1861                         init_timer(&adapter->blink_timer);
1862                         adapter->blink_timer.function = e1000_led_blink_callback;
1863                         adapter->blink_timer.data = (unsigned long) adapter;
1864                 }
1865                 mod_timer(&adapter->blink_timer, jiffies);
1866                 msleep_interruptible(data * 1000);
1867                 del_timer_sync(&adapter->blink_timer);
1868                 e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
1869         } else {
1870                 e1000_blink_led_start(&adapter->hw);
1871                 msleep_interruptible(data * 1000);
1872         }
1873
1874         e1000_led_off(&adapter->hw);
1875         clear_bit(E1000_LED_ON, &adapter->led_status);
1876         e1000_cleanup_led(&adapter->hw);
1877
1878         return 0;
1879 }
1880
1881 static int
1882 e1000_nway_reset(struct net_device *netdev)
1883 {
1884         struct e1000_adapter *adapter = netdev_priv(netdev);
1885         if (netif_running(netdev))
1886                 e1000_reinit_locked(adapter);
1887         return 0;
1888 }
1889
1890 static int
1891 e1000_get_stats_count(struct net_device *netdev)
1892 {
1893         return E1000_STATS_LEN;
1894 }
1895
1896 static void
1897 e1000_get_ethtool_stats(struct net_device *netdev,
1898                 struct ethtool_stats *stats, uint64_t *data)
1899 {
1900         struct e1000_adapter *adapter = netdev_priv(netdev);
1901         int i;
1902
1903         e1000_update_stats(adapter);
1904         for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
1905                 char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
1906                 data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
1907                         sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
1908         }
1909 /*      BUG_ON(i != E1000_STATS_LEN); */
1910 }
1911
1912 static void
1913 e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
1914 {
1915         uint8_t *p = data;
1916         int i;
1917
1918         switch (stringset) {
1919         case ETH_SS_TEST:
1920                 memcpy(data, *e1000_gstrings_test,
1921                         E1000_TEST_LEN*ETH_GSTRING_LEN);
1922                 break;
1923         case ETH_SS_STATS:
1924                 for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
1925                         memcpy(p, e1000_gstrings_stats[i].stat_string,
1926                                ETH_GSTRING_LEN);
1927                         p += ETH_GSTRING_LEN;
1928                 }
1929 /*              BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
1930                 break;
1931         }
1932 }
1933
1934 static const struct ethtool_ops e1000_ethtool_ops = {
1935         .get_settings           = e1000_get_settings,
1936         .set_settings           = e1000_set_settings,
1937         .get_drvinfo            = e1000_get_drvinfo,
1938         .get_regs_len           = e1000_get_regs_len,
1939         .get_regs               = e1000_get_regs,
1940         .get_wol                = e1000_get_wol,
1941         .set_wol                = e1000_set_wol,
1942         .get_msglevel           = e1000_get_msglevel,
1943         .set_msglevel           = e1000_set_msglevel,
1944         .nway_reset             = e1000_nway_reset,
1945         .get_link               = ethtool_op_get_link,
1946         .get_eeprom_len         = e1000_get_eeprom_len,
1947         .get_eeprom             = e1000_get_eeprom,
1948         .set_eeprom             = e1000_set_eeprom,
1949         .get_ringparam          = e1000_get_ringparam,
1950         .set_ringparam          = e1000_set_ringparam,
1951         .get_pauseparam         = e1000_get_pauseparam,
1952         .set_pauseparam         = e1000_set_pauseparam,
1953         .get_rx_csum            = e1000_get_rx_csum,
1954         .set_rx_csum            = e1000_set_rx_csum,
1955         .get_tx_csum            = e1000_get_tx_csum,
1956         .set_tx_csum            = e1000_set_tx_csum,
1957         .get_sg                 = ethtool_op_get_sg,
1958         .set_sg                 = ethtool_op_set_sg,
1959 #ifdef NETIF_F_TSO
1960         .get_tso                = ethtool_op_get_tso,
1961         .set_tso                = e1000_set_tso,
1962 #endif
1963         .self_test_count        = e1000_diag_test_count,
1964         .self_test              = e1000_diag_test,
1965         .get_strings            = e1000_get_strings,
1966         .phys_id                = e1000_phys_id,
1967         .get_stats_count        = e1000_get_stats_count,
1968         .get_ethtool_stats      = e1000_get_ethtool_stats,
1969         .get_perm_addr          = ethtool_op_get_perm_addr,
1970 };
1971
1972 void e1000_set_ethtool_ops(struct net_device *netdev)
1973 {
1974         SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
1975 }