drivers/scsi/qla2xxx/qla_os.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/moduleparam.h>
  10 #include <linux/vmalloc.h>
  11 #include <linux/smp_lock.h>
  12 #include <linux/delay.h>
  13
  14 #include <scsi/scsi_tcq.h>
  15 #include <scsi/scsicam.h>
  16 #include <scsi/scsi_transport.h>
  17 #include <scsi/scsi_transport_fc.h>
  18
  19 /*
  20  * Driver version
  21  */
  22 char qla2x00_version_str[40];
  23
  24 /*
  25  * SRB allocation cache
  26  */
  27 static kmem_cache_t *srb_cachep;
  28
  29 /*
  30  * Ioctl related information.
  31  */
  32 static int num_hosts;
  33
  34 int ql2xlogintimeout = 20;
  35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
  36 MODULE_PARM_DESC(ql2xlogintimeout,
  37                 "Login timeout value in seconds.");
  38
  39 int qlport_down_retry = 30;
  40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
  41 MODULE_PARM_DESC(qlport_down_retry,
  42                 "Maximum number of command retries to a port that returns"
  43                 "a PORT-DOWN status.");
  44
  45 int ql2xplogiabsentdevice;
  46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
  47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
  48                 "Option to enable PLOGI to devices that are not present after "
  49                 "a Fabric scan.  This is needed for several broken switches."
  50                 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
  51
  52 int ql2xloginretrycount = 0;
  53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
  54 MODULE_PARM_DESC(ql2xloginretrycount,
  55                 "Specify an alternate value for the NVRAM login retry count.");
  56
  57 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
  58 int ql2xfwloadflash;
  59 module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
  60 MODULE_PARM_DESC(ql2xfwloadflash,
  61                 "Load ISP24xx firmware image from FLASH (onboard memory).");
  62 #endif
  63
  64 static void qla2x00_free_device(scsi_qla_host_t *);
  65
  66 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
  67
  68 int ql2xfdmienable;
  69 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
  70 MODULE_PARM_DESC(ql2xfdmienable,
  71                 "Enables FDMI registratons "
  72                 "Default is 0 - no FDMI. 1 - perfom FDMI.");
  73
  74 int ql2xprocessrscn;
  75 module_param(ql2xprocessrscn, int, S_IRUGO|S_IRUSR);
  76 MODULE_PARM_DESC(ql2xprocessrscn,
  77                 "Option to enable port RSCN handling via a series of less"
  78                 "fabric intrusive ADISCs and PLOGIs.");
  79
  80 /*
  81  * SCSI host template entry points
  82  */
  83 static int qla2xxx_slave_configure(struct scsi_device * device);
  84 static int qla2xxx_slave_alloc(struct scsi_device *);
  85 static void qla2xxx_slave_destroy(struct scsi_device *);
  86 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
  87                 void (*fn)(struct scsi_cmnd *));
  88 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
  89                 void (*fn)(struct scsi_cmnd *));
  90 static int qla2xxx_eh_abort(struct scsi_cmnd *);
  91 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
  92 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
  93 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
  94 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
  95 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
  96
  97 static int qla2x00_change_queue_depth(struct scsi_device *, int);
  98 static int qla2x00_change_queue_type(struct scsi_device *, int);
  99
 100 static struct scsi_host_template qla2x00_driver_template = {
 101         .module                 = THIS_MODULE,
 102         .name                   = "qla2xxx",
 103         .queuecommand           = qla2x00_queuecommand,
 104
 105         .eh_abort_handler       = qla2xxx_eh_abort,
 106         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 107         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 108         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 109
 110         .slave_configure        = qla2xxx_slave_configure,
 111
 112         .slave_alloc            = qla2xxx_slave_alloc,
 113         .slave_destroy          = qla2xxx_slave_destroy,
 114         .change_queue_depth     = qla2x00_change_queue_depth,
 115         .change_queue_type      = qla2x00_change_queue_type,
 116         .this_id                = -1,
 117         .cmd_per_lun            = 3,
 118         .use_clustering         = ENABLE_CLUSTERING,
 119         .sg_tablesize           = SG_ALL,
 120
 121         /*
 122          * The RISC allows for each command to transfer (2^32-1) bytes of data,
 123          * which equates to 0x800000 sectors.
 124          */
 125         .max_sectors            = 0xFFFF,
 126         .shost_attrs            = qla2x00_host_attrs,
 127 };
 128
 129 static struct scsi_host_template qla24xx_driver_template = {
 130         .module                 = THIS_MODULE,
 131         .name                   = "qla2xxx",
 132         .queuecommand           = qla24xx_queuecommand,
 133
 134         .eh_abort_handler       = qla2xxx_eh_abort,
 135         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 136         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 137         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 138
 139         .slave_configure        = qla2xxx_slave_configure,
 140
 141         .slave_alloc            = qla2xxx_slave_alloc,
 142         .slave_destroy          = qla2xxx_slave_destroy,
 143         .change_queue_depth     = qla2x00_change_queue_depth,
 144         .change_queue_type      = qla2x00_change_queue_type,
 145         .this_id                = -1,
 146         .cmd_per_lun            = 3,
 147         .use_clustering         = ENABLE_CLUSTERING,
 148         .sg_tablesize           = SG_ALL,
 149
 150         .max_sectors            = 0xFFFF,
 151         .shost_attrs            = qla2x00_host_attrs,
 152 };
 153
 154 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
 155
 156 /* TODO Convert to inlines
 157  *
 158  * Timer routines
 159  */
 160 #define WATCH_INTERVAL          1       /* number of seconds */
 161
 162 static void qla2x00_timer(scsi_qla_host_t *);
 163
 164 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
 165     void *, unsigned long);
 166 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
 167 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
 168
 169 static inline void
 170 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
 171 {
 172         init_timer(&ha->timer);
 173         ha->timer.expires = jiffies + interval * HZ;
 174         ha->timer.data = (unsigned long)ha;
 175         ha->timer.function = (void (*)(unsigned long))func;
 176         add_timer(&ha->timer);
 177         ha->timer_active = 1;
 178 }
 179
 180 static inline void
 181 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
 182 {
 183         mod_timer(&ha->timer, jiffies + interval * HZ);
 184 }
 185
 186 static __inline__ void
 187 qla2x00_stop_timer(scsi_qla_host_t *ha)
 188 {
 189         del_timer_sync(&ha->timer);
 190         ha->timer_active = 0;
 191 }
 192
 193 static int qla2x00_do_dpc(void *data);
 194
 195 static void qla2x00_rst_aen(scsi_qla_host_t *);
 196
 197 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
 198 static void qla2x00_mem_free(scsi_qla_host_t *ha);
 199 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
 200 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
 201 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
 202 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
 203
 204 /* -------------------------------------------------------------------------- */
 205
 206 static char *
 207 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
 208 {
 209         static char *pci_bus_modes[] = {
 210                 "33", "66", "100", "133",
 211         };
 212         uint16_t pci_bus;
 213
 214         strcpy(str, "PCI");
 215         pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
 216         if (pci_bus) {
 217                 strcat(str, "-X (");
 218                 strcat(str, pci_bus_modes[pci_bus]);
 219         } else {
 220                 pci_bus = (ha->pci_attr & BIT_8) >> 8;
 221                 strcat(str, " (");
 222                 strcat(str, pci_bus_modes[pci_bus]);
 223         }
 224         strcat(str, " MHz)");
 225
 226         return (str);
 227 }
 228
 229 static char *
 230 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
 231 {
 232         static char *pci_bus_modes[] = { "33", "66", "100", "133", };
 233         uint32_t pci_bus;
 234         int pcie_reg;
 235
 236         pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
 237         if (pcie_reg) {
 238                 char lwstr[6];
 239                 uint16_t pcie_lstat, lspeed, lwidth;
 240
 241                 pcie_reg += 0x12;
 242                 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 243                 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 244                 lwidth = (pcie_lstat &
 245                     (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
 246
 247                 strcpy(str, "PCIe (");
 248                 if (lspeed == 1)
 249                         strcat(str, "2.5Gb/s ");
 250                 else
 251                         strcat(str, "<unknown> ");
 252                 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
 253                 strcat(str, lwstr);
 254
 255                 return str;
 256         }
 257
 258         strcpy(str, "PCI");
 259         pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
 260         if (pci_bus == 0 || pci_bus == 8) {
 261                 strcat(str, " (");
 262                 strcat(str, pci_bus_modes[pci_bus >> 3]);
 263         } else {
 264                 strcat(str, "-X ");
 265                 if (pci_bus & BIT_2)
 266                         strcat(str, "Mode 2");
 267                 else
 268                         strcat(str, "Mode 1");
 269                 strcat(str, " (");
 270                 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
 271         }
 272         strcat(str, " MHz)");
 273
 274         return str;
 275 }
 276
 277 char *
 278 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 279 {
 280         char un_str[10];
 281
 282         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 283             ha->fw_minor_version,
 284             ha->fw_subminor_version);
 285
 286         if (ha->fw_attributes & BIT_9) {
 287                 strcat(str, "FLX");
 288                 return (str);
 289         }
 290
 291         switch (ha->fw_attributes & 0xFF) {
 292         case 0x7:
 293                 strcat(str, "EF");
 294                 break;
 295         case 0x17:
 296                 strcat(str, "TP");
 297                 break;
 298         case 0x37:
 299                 strcat(str, "IP");
 300                 break;
 301         case 0x77:
 302                 strcat(str, "VI");
 303                 break;
 304         default:
 305                 sprintf(un_str, "(%x)", ha->fw_attributes);
 306                 strcat(str, un_str);
 307                 break;
 308         }
 309         if (ha->fw_attributes & 0x100)
 310                 strcat(str, "X");
 311
 312         return (str);
 313 }
 314
 315 char *
 316 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 317 {
 318         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 319             ha->fw_minor_version,
 320             ha->fw_subminor_version);
 321
 322         if (ha->fw_attributes & BIT_0)
 323                 strcat(str, "[Class 2] ");
 324         if (ha->fw_attributes & BIT_1)
 325                 strcat(str, "[IP] ");
 326         if (ha->fw_attributes & BIT_2)
 327                 strcat(str, "[Multi-ID] ");
 328         if (ha->fw_attributes & BIT_13)
 329                 strcat(str, "[Experimental]");
 330         return str;
 331 }
 332
 333 static inline srb_t *
 334 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
 335     struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 336 {
 337         srb_t *sp;
 338
 339         sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
 340         if (!sp)
 341                 return sp;
 342
 343         atomic_set(&sp->ref_count, 1);
 344         sp->ha = ha;
 345         sp->fcport = fcport;
 346         sp->cmd = cmd;
 347         sp->flags = 0;
 348         CMD_SP(cmd) = (void *)sp;
 349         cmd->scsi_done = done;
 350
 351         return sp;
 352 }
 353
 354 static int
 355 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 356 {
 357         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 358         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 359         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 360         srb_t *sp;
 361         int rval;
 362
 363         rval = fc_remote_port_chkready(rport);
 364         if (rval) {
 365                 cmd->result = rval;
 366                 goto qc_fail_command;
 367         }
 368
 369         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 370                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 371                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 372                         cmd->result = DID_NO_CONNECT << 16;
 373                         goto qc_fail_command;
 374                 }
 375                 goto qc_host_busy;
 376         }
 377
 378         spin_unlock_irq(ha->host->host_lock);
 379
 380         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 381         if (!sp)
 382                 goto qc_host_busy_lock;
 383
 384         rval = qla2x00_start_scsi(sp);
 385         if (rval != QLA_SUCCESS)
 386                 goto qc_host_busy_free_sp;
 387
 388         spin_lock_irq(ha->host->host_lock);
 389
 390         return 0;
 391
 392 qc_host_busy_free_sp:
 393         qla2x00_sp_free_dma(ha, sp);
 394         mempool_free(sp, ha->srb_mempool);
 395
 396 qc_host_busy_lock:
 397         spin_lock_irq(ha->host->host_lock);
 398
 399 qc_host_busy:
 400         return SCSI_MLQUEUE_HOST_BUSY;
 401
 402 qc_fail_command:
 403         done(cmd);
 404
 405         return 0;
 406 }
 407
 408
 409 static int
 410 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 411 {
 412         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 413         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 414         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 415         srb_t *sp;
 416         int rval;
 417
 418         rval = fc_remote_port_chkready(rport);
 419         if (rval) {
 420                 cmd->result = rval;
 421                 goto qc24_fail_command;
 422         }
 423
 424         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 425                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 426                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 427                         cmd->result = DID_NO_CONNECT << 16;
 428                         goto qc24_fail_command;
 429                 }
 430                 goto qc24_host_busy;
 431         }
 432
 433         spin_unlock_irq(ha->host->host_lock);
 434
 435         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 436         if (!sp)
 437                 goto qc24_host_busy_lock;
 438
 439         rval = qla24xx_start_scsi(sp);
 440         if (rval != QLA_SUCCESS)
 441                 goto qc24_host_busy_free_sp;
 442
 443         spin_lock_irq(ha->host->host_lock);
 444
 445         return 0;
 446
 447 qc24_host_busy_free_sp:
 448         qla2x00_sp_free_dma(ha, sp);
 449         mempool_free(sp, ha->srb_mempool);
 450
 451 qc24_host_busy_lock:
 452         spin_lock_irq(ha->host->host_lock);
 453
 454 qc24_host_busy:
 455         return SCSI_MLQUEUE_HOST_BUSY;
 456
 457 qc24_fail_command:
 458         done(cmd);
 459
 460         return 0;
 461 }
 462
 463
 464 /*
 465  * qla2x00_eh_wait_on_command
 466  *    Waits for the command to be returned by the Firmware for some
 467  *    max time.
 468  *
 469  * Input:
 470  *    ha = actual ha whose done queue will contain the command
 471  *            returned by firmware.
 472  *    cmd = Scsi Command to wait on.
 473  *    flag = Abort/Reset(Bus or Device Reset)
 474  *
 475  * Return:
 476  *    Not Found : 0
 477  *    Found : 1
 478  */
 479 static int
 480 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
 481 {
 482 #define ABORT_POLLING_PERIOD    1000
 483 #define ABORT_WAIT_ITER         ((10 * 1000) / (ABORT_POLLING_PERIOD))
 484         unsigned long wait_iter = ABORT_WAIT_ITER;
 485         int ret = QLA_SUCCESS;
 486
 487         while (CMD_SP(cmd)) {
 488                 msleep(ABORT_POLLING_PERIOD);
 489
 490                 if (--wait_iter)
 491                         break;
 492         }
 493         if (CMD_SP(cmd))
 494                 ret = QLA_FUNCTION_FAILED;
 495
 496         return ret;
 497 }
 498
 499 /*
 500  * qla2x00_wait_for_hba_online
 501  *    Wait till the HBA is online after going through
 502  *    <= MAX_RETRIES_OF_ISP_ABORT  or
 503  *    finally HBA is disabled ie marked offline
 504  *
 505  * Input:
 506  *     ha - pointer to host adapter structure
 507  *
 508  * Note:
 509  *    Does context switching-Release SPIN_LOCK
 510  *    (if any) before calling this routine.
 511  *
 512  * Return:
 513  *    Success (Adapter is online) : 0
 514  *    Failed  (Adapter is offline/disabled) : 1
 515  */
 516 static int
 517 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
 518 {
 519         int             return_status;
 520         unsigned long   wait_online;
 521
 522         wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 523         while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
 524             test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
 525             test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
 526             ha->dpc_active) && time_before(jiffies, wait_online)) {
 527
 528                 msleep(1000);
 529         }
 530         if (ha->flags.online)
 531                 return_status = QLA_SUCCESS;
 532         else
 533                 return_status = QLA_FUNCTION_FAILED;
 534
 535         DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
 536
 537         return (return_status);
 538 }
 539
 540 /*
 541  * qla2x00_wait_for_loop_ready
 542  *    Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
 543  *    to be in LOOP_READY state.
 544  * Input:
 545  *     ha - pointer to host adapter structure
 546  *
 547  * Note:
 548  *    Does context switching-Release SPIN_LOCK
 549  *    (if any) before calling this routine.
 550  *
 551  *
 552  * Return:
 553  *    Success (LOOP_READY) : 0
 554  *    Failed  (LOOP_NOT_READY) : 1
 555  */
 556 static inline int
 557 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 558 {
 559         int      return_status = QLA_SUCCESS;
 560         unsigned long loop_timeout ;
 561
 562         /* wait for 5 min at the max for loop to be ready */
 563         loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 564
 565         while ((!atomic_read(&ha->loop_down_timer) &&
 566             atomic_read(&ha->loop_state) == LOOP_DOWN) ||
 567             atomic_read(&ha->loop_state) != LOOP_READY) {
 568                 msleep(1000);
 569                 if (time_after_eq(jiffies, loop_timeout)) {
 570                         return_status = QLA_FUNCTION_FAILED;
 571                         break;
 572                 }
 573         }
 574         return (return_status);
 575 }
 576
 577 /**************************************************************************
 578 * qla2xxx_eh_abort
 579 *
 580 * Description:
 581 *    The abort function will abort the specified command.
 582 *
 583 * Input:
 584 *    cmd = Linux SCSI command packet to be aborted.
 585 *
 586 * Returns:
 587 *    Either SUCCESS or FAILED.
 588 *
 589 * Note:
 590 **************************************************************************/
 591 int
 592 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 593 {
 594         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 595         srb_t *sp;
 596         int ret, i;
 597         unsigned int id, lun;
 598         unsigned long serial;
 599         unsigned long flags;
 600
 601         if (!CMD_SP(cmd))
 602                 return FAILED;
 603
 604         ret = FAILED;
 605
 606         id = cmd->device->id;
 607         lun = cmd->device->lun;
 608         serial = cmd->serial_number;
 609
 610         /* Check active list for command command. */
 611         spin_lock_irqsave(&ha->hardware_lock, flags);
 612         for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 613                 sp = ha->outstanding_cmds[i];
 614
 615                 if (sp == NULL)
 616                         continue;
 617
 618                 if (sp->cmd != cmd)
 619                         continue;
 620
 621                 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld "
 622                     "sp->state=%x\n", __func__, ha->host_no, sp, serial,
 623                     sp->state));
 624                 DEBUG3(qla2x00_print_scsi_cmd(cmd);)
 625
 626                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 627                 if (ha->isp_ops.abort_command(ha, sp)) {
 628                         DEBUG2(printk("%s(%ld): abort_command "
 629                             "mbx failed.\n", __func__, ha->host_no));
 630                 } else {
 631                         DEBUG3(printk("%s(%ld): abort_command "
 632                             "mbx success.\n", __func__, ha->host_no));
 633                         ret = SUCCESS;
 634                 }
 635                 spin_lock_irqsave(&ha->hardware_lock, flags);
 636
 637                 break;
 638         }
 639         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 640
 641         /* Wait for the command to be returned. */
 642         if (ret == SUCCESS) {
 643                 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 644                         qla_printk(KERN_ERR, ha,
 645                             "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 646                             "%x.\n", ha->host_no, id, lun, serial, ret);
 647                 }
 648         }
 649
 650         qla_printk(KERN_INFO, ha,
 651             "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
 652             id, lun, serial, ret);
 653
 654         return ret;
 655 }
 656
 657 /**************************************************************************
 658 * qla2x00_eh_wait_for_pending_target_commands
 659 *
 660 * Description:
 661 *    Waits for all the commands to come back from the specified target.
 662 *
 663 * Input:
 664 *    ha - pointer to scsi_qla_host structure.
 665 *    t  - target
 666 * Returns:
 667 *    Either SUCCESS or FAILED.
 668 *
 669 * Note:
 670 **************************************************************************/
 671 static int
 672 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 673 {
 674         int     cnt;
 675         int     status;
 676         srb_t           *sp;
 677         struct scsi_cmnd *cmd;
 678         unsigned long flags;
 679
 680         status = 0;
 681
 682         /*
 683          * Waiting for all commands for the designated target in the active
 684          * array
 685          */
 686         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 687                 spin_lock_irqsave(&ha->hardware_lock, flags);
 688                 sp = ha->outstanding_cmds[cnt];
 689                 if (sp) {
 690                         cmd = sp->cmd;
 691                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 692                         if (cmd->device->id == t) {
 693                                 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
 694                                         status = 1;
 695                                         break;
 696                                 }
 697                         }
 698                 } else {
 699                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 700                 }
 701         }
 702         return (status);
 703 }
 704
 705
 706 /**************************************************************************
 707 * qla2xxx_eh_device_reset
 708 *
 709 * Description:
 710 *    The device reset function will reset the target and abort any
 711 *    executing commands.
 712 *
 713 *    NOTE: The use of SP is undefined within this context.  Do *NOT*
 714 *          attempt to use this value, even if you determine it is
 715 *          non-null.
 716 *
 717 * Input:
 718 *    cmd = Linux SCSI command packet of the command that cause the
 719 *          bus device reset.
 720 *
 721 * Returns:
 722 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 723 *
 724 **************************************************************************/
 725 int
 726 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 727 {
 728         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 729         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 730         srb_t *sp;
 731         int ret;
 732         unsigned int id, lun;
 733         unsigned long serial;
 734
 735         ret = FAILED;
 736
 737         id = cmd->device->id;
 738         lun = cmd->device->lun;
 739         serial = cmd->serial_number;
 740
 741         sp = (srb_t *) CMD_SP(cmd);
 742         if (!sp || !fcport)
 743                 return ret;
 744
 745         qla_printk(KERN_INFO, ha,
 746             "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
 747
 748         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 749                 goto eh_dev_reset_done;
 750
 751         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 752                 if (qla2x00_device_reset(ha, fcport) == 0)
 753                         ret = SUCCESS;
 754
 755 #if defined(LOGOUT_AFTER_DEVICE_RESET)
 756                 if (ret == SUCCESS) {
 757                         if (fcport->flags & FC_FABRIC_DEVICE) {
 758                                 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
 759                                 qla2x00_mark_device_lost(ha, fcport);
 760                         }
 761                 }
 762 #endif
 763         } else {
 764                 DEBUG2(printk(KERN_INFO
 765                     "%s failed: loop not ready\n",__func__);)
 766         }
 767
 768         if (ret == FAILED) {
 769                 DEBUG3(printk("%s(%ld): device reset failed\n",
 770                     __func__, ha->host_no));
 771                 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
 772                     __func__);
 773
 774                 goto eh_dev_reset_done;
 775         }
 776
 777         /* Flush outstanding commands. */
 778         if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
 779                 ret = FAILED;
 780         if (ret == FAILED) {
 781                 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
 782                     __func__, ha->host_no));
 783                 qla_printk(KERN_INFO, ha,
 784                     "%s: failed while waiting for commands\n", __func__);
 785         } else
 786                 qla_printk(KERN_INFO, ha,
 787                     "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
 788                     id, lun);
 789  eh_dev_reset_done:
 790         return ret;
 791 }
 792
 793 /**************************************************************************
 794 * qla2x00_eh_wait_for_pending_commands
 795 *
 796 * Description:
 797 *    Waits for all the commands to come back from the specified host.
 798 *
 799 * Input:
 800 *    ha - pointer to scsi_qla_host structure.
 801 *
 802 * Returns:
 803 *    1 : SUCCESS
 804 *    0 : FAILED
 805 *
 806 * Note:
 807 **************************************************************************/
 808 static int
 809 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 810 {
 811         int     cnt;
 812         int     status;
 813         srb_t           *sp;
 814         struct scsi_cmnd *cmd;
 815         unsigned long flags;
 816
 817         status = 1;
 818
 819         /*
 820          * Waiting for all commands for the designated target in the active
 821          * array
 822          */
 823         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 824                 spin_lock_irqsave(&ha->hardware_lock, flags);
 825                 sp = ha->outstanding_cmds[cnt];
 826                 if (sp) {
 827                         cmd = sp->cmd;
 828                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 829                         status = qla2x00_eh_wait_on_command(ha, cmd);
 830                         if (status == 0)
 831                                 break;
 832                 }
 833                 else {
 834                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 835                 }
 836         }
 837         return (status);
 838 }
 839
 840
 841 /**************************************************************************
 842 * qla2xxx_eh_bus_reset
 843 *
 844 * Description:
 845 *    The bus reset function will reset the bus and abort any executing
 846 *    commands.
 847 *
 848 * Input:
 849 *    cmd = Linux SCSI command packet of the command that cause the
 850 *          bus reset.
 851 *
 852 * Returns:
 853 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 854 *
 855 **************************************************************************/
 856 int
 857 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 858 {
 859         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 860         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 861         srb_t *sp;
 862         int ret;
 863         unsigned int id, lun;
 864         unsigned long serial;
 865
 866         ret = FAILED;
 867
 868         id = cmd->device->id;
 869         lun = cmd->device->lun;
 870         serial = cmd->serial_number;
 871
 872         sp = (srb_t *) CMD_SP(cmd);
 873         if (!sp || !fcport)
 874                 return ret;
 875
 876         qla_printk(KERN_INFO, ha,
 877             "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
 878
 879         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
 880                 DEBUG2(printk("%s failed:board disabled\n",__func__));
 881                 goto eh_bus_reset_done;
 882         }
 883
 884         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 885                 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
 886                         ret = SUCCESS;
 887         }
 888         if (ret == FAILED)
 889                 goto eh_bus_reset_done;
 890
 891         /* Flush outstanding commands. */
 892         if (!qla2x00_eh_wait_for_pending_commands(ha))
 893                 ret = FAILED;
 894
 895 eh_bus_reset_done:
 896         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 897             (ret == FAILED) ? "failed" : "succeded");
 898
 899         return ret;
 900 }
 901
 902 /**************************************************************************
 903 * qla2xxx_eh_host_reset
 904 *
 905 * Description:
 906 *    The reset function will reset the Adapter.
 907 *
 908 * Input:
 909 *      cmd = Linux SCSI command packet of the command that cause the
 910 *            adapter reset.
 911 *
 912 * Returns:
 913 *      Either SUCCESS or FAILED.
 914 *
 915 * Note:
 916 **************************************************************************/
 917 int
 918 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 919 {
 920         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 921         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 922         srb_t *sp;
 923         int ret;
 924         unsigned int id, lun;
 925         unsigned long serial;
 926
 927         ret = FAILED;
 928
 929         id = cmd->device->id;
 930         lun = cmd->device->lun;
 931         serial = cmd->serial_number;
 932
 933         sp = (srb_t *) CMD_SP(cmd);
 934         if (!sp || !fcport)
 935                 return ret;
 936
 937         qla_printk(KERN_INFO, ha,
 938             "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
 939
 940         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 941                 goto eh_host_reset_lock;
 942
 943         /*
 944          * Fixme-may be dpc thread is active and processing
 945          * loop_resync,so wait a while for it to
 946          * be completed and then issue big hammer.Otherwise
 947          * it may cause I/O failure as big hammer marks the
 948          * devices as lost kicking of the port_down_timer
 949          * while dpc is stuck for the mailbox to complete.
 950          */
 951         qla2x00_wait_for_loop_ready(ha);
 952         set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 953         if (qla2x00_abort_isp(ha)) {
 954                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 955                 /* failed. schedule dpc to try */
 956                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 957
 958                 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 959                         goto eh_host_reset_lock;
 960         }
 961         clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 962
 963         /* Waiting for our command in done_queue to be returned to OS.*/
 964         if (qla2x00_eh_wait_for_pending_commands(ha))
 965                 ret = SUCCESS;
 966
 967 eh_host_reset_lock:
 968         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 969             (ret == FAILED) ? "failed" : "succeded");
 970
 971         return ret;
 972 }
 973
 974 /*
 975 * qla2x00_loop_reset
 976 *      Issue loop reset.
 977 *
 978 * Input:
 979 *      ha = adapter block pointer.
 980 *
 981 * Returns:
 982 *      0 = success
 983 */
 984 static int
 985 qla2x00_loop_reset(scsi_qla_host_t *ha)
 986 {
 987         int status = QLA_SUCCESS;
 988         struct fc_port *fcport;
 989
 990         if (ha->flags.enable_lip_reset) {
 991                 status = qla2x00_lip_reset(ha);
 992         }
 993
 994         if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
 995                 list_for_each_entry(fcport, &ha->fcports, list) {
 996                         if (fcport->port_type != FCT_TARGET)
 997                                 continue;
 998
 999                         status = qla2x00_device_reset(ha, fcport);
1000                         if (status != QLA_SUCCESS)
1001                                 break;
1002                 }
1003         }
1004
1005         if (status == QLA_SUCCESS &&
1006                 ((!ha->flags.enable_target_reset &&
1007                   !ha->flags.enable_lip_reset) ||
1008                 ha->flags.enable_lip_full_login)) {
1009
1010                 status = qla2x00_full_login_lip(ha);
1011         }
1012
1013         /* Issue marker command only when we are going to start the I/O */
1014         ha->marker_needed = 1;
1015
1016         if (status) {
1017                 /* Empty */
1018                 DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
1019                                 __func__,
1020                                 ha->host_no);)
1021         } else {
1022                 /* Empty */
1023                 DEBUG3(printk("%s(%ld): exiting normally.\n",
1024                                 __func__,
1025                                 ha->host_no);)
1026         }
1027
1028         return(status);
1029 }
1030
1031 /*
1032  * qla2x00_device_reset
1033  *      Issue bus device reset message to the target.
1034  *
1035  * Input:
1036  *      ha = adapter block pointer.
1037  *      t = SCSI ID.
1038  *      TARGET_QUEUE_LOCK must be released.
1039  *      ADAPTER_STATE_LOCK must be released.
1040  *
1041  * Context:
1042  *      Kernel context.
1043  */
1044 static int
1045 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1046 {
1047         /* Abort Target command will clear Reservation */
1048         return ha->isp_ops.abort_target(reset_fcport);
1049 }
1050
1051 static int
1052 qla2xxx_slave_alloc(struct scsi_device *sdev)
1053 {
1054         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1055
1056         if (!rport || fc_remote_port_chkready(rport))
1057                 return -ENXIO;
1058
1059         sdev->hostdata = *(fc_port_t **)rport->dd_data;
1060
1061         return 0;
1062 }
1063
1064 static int
1065 qla2xxx_slave_configure(struct scsi_device *sdev)
1066 {
1067         scsi_qla_host_t *ha = to_qla_host(sdev->host);
1068         struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1069
1070         if (sdev->tagged_supported)
1071                 scsi_activate_tcq(sdev, 32);
1072         else
1073                 scsi_deactivate_tcq(sdev, 32);
1074
1075         rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1076
1077         return 0;
1078 }
1079
1080 static void
1081 qla2xxx_slave_destroy(struct scsi_device *sdev)
1082 {
1083         sdev->hostdata = NULL;
1084 }
1085
1086 static int
1087 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1088 {
1089         scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1090         return sdev->queue_depth;
1091 }
1092
1093 static int
1094 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1095 {
1096         if (sdev->tagged_supported) {
1097                 scsi_set_tag_type(sdev, tag_type);
1098                 if (tag_type)
1099                         scsi_activate_tcq(sdev, sdev->queue_depth);
1100                 else
1101                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
1102         } else
1103                 tag_type = 0;
1104
1105         return tag_type;
1106 }
1107
1108 /**
1109  * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1110  * @ha: HA context
1111  *
1112  * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1113  * supported addressing method.
1114  */
1115 static void
1116 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1117 {
1118         /* Assume a 32bit DMA mask. */
1119         ha->flags.enable_64bit_addressing = 0;
1120
1121         if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1122                 /* Any upper-dword bits set? */
1123                 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1124                     !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1125                         /* Ok, a 64bit DMA mask is applicable. */
1126                         ha->flags.enable_64bit_addressing = 1;
1127                         ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1128                         ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1129                         return;
1130                 }
1131         }
1132
1133         dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1134         pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1135 }
1136
1137 static int
1138 qla2x00_iospace_config(scsi_qla_host_t *ha)
1139 {
1140         unsigned long   pio, pio_len, pio_flags;
1141         unsigned long   mmio, mmio_len, mmio_flags;
1142
1143         /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1144         pio = pci_resource_start(ha->pdev, 0);
1145         pio_len = pci_resource_len(ha->pdev, 0);
1146         pio_flags = pci_resource_flags(ha->pdev, 0);
1147         if (pio_flags & IORESOURCE_IO) {
1148                 if (pio_len < MIN_IOBASE_LEN) {
1149                         qla_printk(KERN_WARNING, ha,
1150                             "Invalid PCI I/O region size (%s)...\n",
1151                                 pci_name(ha->pdev));
1152                         pio = 0;
1153                 }
1154         } else {
1155                 qla_printk(KERN_WARNING, ha,
1156                     "region #0 not a PIO resource (%s)...\n",
1157                     pci_name(ha->pdev));
1158                 pio = 0;
1159         }
1160
1161         /* Use MMIO operations for all accesses. */
1162         mmio = pci_resource_start(ha->pdev, 1);
1163         mmio_len = pci_resource_len(ha->pdev, 1);
1164         mmio_flags = pci_resource_flags(ha->pdev, 1);
1165
1166         if (!(mmio_flags & IORESOURCE_MEM)) {
1167                 qla_printk(KERN_ERR, ha,
1168                     "region #0 not an MMIO resource (%s), aborting\n",
1169                     pci_name(ha->pdev));
1170                 goto iospace_error_exit;
1171         }
1172         if (mmio_len < MIN_IOBASE_LEN) {
1173                 qla_printk(KERN_ERR, ha,
1174                     "Invalid PCI mem region size (%s), aborting\n",
1175                         pci_name(ha->pdev));
1176                 goto iospace_error_exit;
1177         }
1178
1179         if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
1180                 qla_printk(KERN_WARNING, ha,
1181                     "Failed to reserve PIO/MMIO regions (%s)\n",
1182                     pci_name(ha->pdev));
1183
1184                 goto iospace_error_exit;
1185         }
1186
1187         ha->pio_address = pio;
1188         ha->pio_length = pio_len;
1189         ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1190         if (!ha->iobase) {
1191                 qla_printk(KERN_ERR, ha,
1192                     "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1193
1194                 goto iospace_error_exit;
1195         }
1196
1197         return (0);
1198
1199 iospace_error_exit:
1200         return (-ENOMEM);
1201 }
1202
1203 static void
1204 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1205 {
1206         unsigned long flags = 0;
1207         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1208
1209         spin_lock_irqsave(&ha->hardware_lock, flags);
1210         ha->interrupts_on = 1;
1211         /* enable risc and host interrupts */
1212         WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
1213         RD_REG_WORD(&reg->ictrl);
1214         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1215
1216 }
1217
1218 static void
1219 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1220 {
1221         unsigned long flags = 0;
1222         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1223
1224         spin_lock_irqsave(&ha->hardware_lock, flags);
1225         ha->interrupts_on = 0;
1226         /* disable risc and host interrupts */
1227         WRT_REG_WORD(&reg->ictrl, 0);
1228         RD_REG_WORD(&reg->ictrl);
1229         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1230 }
1231
1232 static void
1233 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1234 {
1235         unsigned long flags = 0;
1236         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1237
1238         spin_lock_irqsave(&ha->hardware_lock, flags);
1239         ha->interrupts_on = 1;
1240         WRT_REG_DWORD(&reg->ictrl, ICRX_EN_RISC_INT);
1241         RD_REG_DWORD(&reg->ictrl);
1242         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1243 }
1244
1245 static void
1246 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1247 {
1248         unsigned long flags = 0;
1249         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1250
1251         spin_lock_irqsave(&ha->hardware_lock, flags);
1252         ha->interrupts_on = 0;
1253         WRT_REG_DWORD(&reg->ictrl, 0);
1254         RD_REG_DWORD(&reg->ictrl);
1255         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1256 }
1257
1258 /*
1259  * PCI driver interface
1260  */
1261 int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
1262 {
1263         int     ret = -ENODEV;
1264         device_reg_t __iomem *reg;
1265         struct Scsi_Host *host;
1266         scsi_qla_host_t *ha;
1267         unsigned long   flags = 0;
1268         unsigned long   wait_switch = 0;
1269         char pci_info[20];
1270         char fw_str[30];
1271         fc_port_t *fcport;
1272         struct scsi_host_template *sht;
1273
1274         if (pci_enable_device(pdev))
1275                 goto probe_out;
1276
1277         sht = &qla2x00_driver_template;
1278         if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1279             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
1280                 sht = &qla24xx_driver_template;
1281         host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1282         if (host == NULL) {
1283                 printk(KERN_WARNING
1284                     "qla2xxx: Couldn't allocate host from scsi layer!\n");
1285                 goto probe_disable_device;
1286         }
1287
1288         /* Clear our data area */
1289         ha = (scsi_qla_host_t *)host->hostdata;
1290         memset(ha, 0, sizeof(scsi_qla_host_t));
1291
1292         ha->pdev = pdev;
1293         ha->host = host;
1294         ha->host_no = host->host_no;
1295         ha->brd_info = brd_info;
1296         sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
1297
1298         ha->dpc_pid = -1;
1299
1300         /* Configure PCI I/O space */
1301         ret = qla2x00_iospace_config(ha);
1302         if (ret)
1303                 goto probe_failed;
1304
1305         qla_printk(KERN_INFO, ha,
1306             "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1307             ha->iobase);
1308
1309         spin_lock_init(&ha->hardware_lock);
1310
1311         ha->prev_topology = 0;
1312         ha->ports = MAX_BUSES;
1313         ha->init_cb_size = sizeof(init_cb_t);
1314         ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1315
1316         /* Assign ISP specific operations. */
1317         ha->isp_ops.pci_config          = qla2100_pci_config;
1318         ha->isp_ops.reset_chip          = qla2x00_reset_chip;
1319         ha->isp_ops.chip_diag           = qla2x00_chip_diag;
1320         ha->isp_ops.config_rings        = qla2x00_config_rings;
1321         ha->isp_ops.reset_adapter       = qla2x00_reset_adapter;
1322         ha->isp_ops.nvram_config        = qla2x00_nvram_config;
1323         ha->isp_ops.update_fw_options   = qla2x00_update_fw_options;
1324         ha->isp_ops.load_risc           = qla2x00_load_risc;
1325         ha->isp_ops.pci_info_str        = qla2x00_pci_info_str;
1326         ha->isp_ops.fw_version_str      = qla2x00_fw_version_str;
1327         ha->isp_ops.intr_handler        = qla2100_intr_handler;
1328         ha->isp_ops.enable_intrs        = qla2x00_enable_intrs;
1329         ha->isp_ops.disable_intrs       = qla2x00_disable_intrs;
1330         ha->isp_ops.abort_command       = qla2x00_abort_command;
1331         ha->isp_ops.abort_target        = qla2x00_abort_target;
1332         ha->isp_ops.fabric_login        = qla2x00_login_fabric;
1333         ha->isp_ops.fabric_logout       = qla2x00_fabric_logout;
1334         ha->isp_ops.calc_req_entries    = qla2x00_calc_iocbs_32;
1335         ha->isp_ops.build_iocbs         = qla2x00_build_scsi_iocbs_32;
1336         ha->isp_ops.prep_ms_iocb        = qla2x00_prep_ms_iocb;
1337         ha->isp_ops.prep_ms_fdmi_iocb   = qla2x00_prep_ms_fdmi_iocb;
1338         ha->isp_ops.read_nvram          = qla2x00_read_nvram_data;
1339         ha->isp_ops.write_nvram         = qla2x00_write_nvram_data;
1340         ha->isp_ops.fw_dump             = qla2100_fw_dump;
1341         ha->isp_ops.ascii_fw_dump       = qla2100_ascii_fw_dump;
1342         if (IS_QLA2100(ha)) {
1343                 host->max_id = MAX_TARGETS_2100;
1344                 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1345                 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1346                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1347                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1348                 host->sg_tablesize = 32;
1349                 ha->gid_list_info_size = 4;
1350         } else if (IS_QLA2200(ha)) {
1351                 host->max_id = MAX_TARGETS_2200;
1352                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1353                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1354                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1355                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1356                 ha->gid_list_info_size = 4;
1357         } else if (IS_QLA23XX(ha)) {
1358                 host->max_id = MAX_TARGETS_2200;
1359                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1360                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1361                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1362                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1363                 ha->isp_ops.pci_config = qla2300_pci_config;
1364                 ha->isp_ops.intr_handler = qla2300_intr_handler;
1365                 ha->isp_ops.fw_dump = qla2300_fw_dump;
1366                 ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
1367                 ha->gid_list_info_size = 6;
1368         } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1369                 host->max_id = MAX_TARGETS_2200;
1370                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1371                 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1372                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1373                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1374                 ha->init_cb_size = sizeof(struct init_cb_24xx);
1375                 ha->mgmt_svr_loop_id = 10;
1376                 ha->isp_ops.pci_config = qla24xx_pci_config;
1377                 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1378                 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1379                 ha->isp_ops.config_rings = qla24xx_config_rings;
1380                 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1381                 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1382                 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1383                 ha->isp_ops.load_risc = qla24xx_load_risc;
1384 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
1385                 if (ql2xfwloadflash)
1386                         ha->isp_ops.load_risc = qla24xx_load_risc_flash;
1387 #endif
1388                 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1389                 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1390                 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1391                 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1392                 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1393                 ha->isp_ops.abort_command = qla24xx_abort_command;
1394                 ha->isp_ops.abort_target = qla24xx_abort_target;
1395                 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1396                 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1397                 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1398                 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1399                 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1400                 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1401                 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1402                 ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
1403                 ha->gid_list_info_size = 8;
1404         }
1405         host->can_queue = ha->request_q_length + 128;
1406
1407         /* load the F/W, read paramaters, and init the H/W */
1408         ha->instance = num_hosts;
1409
1410         init_MUTEX(&ha->mbx_cmd_sem);
1411         init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1412
1413         INIT_LIST_HEAD(&ha->list);
1414         INIT_LIST_HEAD(&ha->fcports);
1415         INIT_LIST_HEAD(&ha->rscn_fcports);
1416
1417         /*
1418          * These locks are used to prevent more than one CPU
1419          * from modifying the queue at the same time. The
1420          * higher level "host_lock" will reduce most
1421          * contention for these locks.
1422          */
1423         spin_lock_init(&ha->mbx_reg_lock);
1424
1425         init_completion(&ha->dpc_inited);
1426         init_completion(&ha->dpc_exited);
1427
1428         qla2x00_config_dma_addressing(ha);
1429         if (qla2x00_mem_alloc(ha)) {
1430                 qla_printk(KERN_WARNING, ha,
1431                     "[ERROR] Failed to allocate memory for adapter\n");
1432
1433                 ret = -ENOMEM;
1434                 goto probe_failed;
1435         }
1436
1437         if (qla2x00_initialize_adapter(ha) &&
1438             !(ha->device_flags & DFLG_NO_CABLE)) {
1439
1440                 qla_printk(KERN_WARNING, ha,
1441                     "Failed to initialize adapter\n");
1442
1443                 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1444                     "Adapter flags %x.\n",
1445                     ha->host_no, ha->device_flags));
1446
1447                 ret = -ENODEV;
1448                 goto probe_failed;
1449         }
1450
1451         /*
1452          * Startup the kernel thread for this host adapter
1453          */
1454         ha->dpc_should_die = 0;
1455         ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0);
1456         if (ha->dpc_pid < 0) {
1457                 qla_printk(KERN_WARNING, ha,
1458                     "Unable to start DPC thread!\n");
1459
1460                 ret = -ENODEV;
1461                 goto probe_failed;
1462         }
1463         wait_for_completion(&ha->dpc_inited);
1464
1465         host->this_id = 255;
1466         host->cmd_per_lun = 3;
1467         host->unique_id = ha->instance;
1468         host->max_cmd_len = MAX_CMDSZ;
1469         host->max_channel = ha->ports - 1;
1470         host->max_lun = MAX_LUNS;
1471         host->transportt = qla2xxx_transport_template;
1472
1473         ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
1474             SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
1475         if (ret) {
1476                 qla_printk(KERN_WARNING, ha,
1477                     "Failed to reserve interrupt %d already in use.\n",
1478                     pdev->irq);
1479                 goto probe_failed;
1480         }
1481         host->irq = pdev->irq;
1482
1483         /* Initialized the timer */
1484         qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1485
1486         DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1487             ha->host_no, ha));
1488
1489         ha->isp_ops.disable_intrs(ha);
1490
1491         spin_lock_irqsave(&ha->hardware_lock, flags);
1492         reg = ha->iobase;
1493         if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1494                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_HOST_INT);
1495                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_RISC_INT);
1496         } else {
1497                 WRT_REG_WORD(&reg->isp.semaphore, 0);
1498                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_RISC_INT);
1499                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_HOST_INT);
1500
1501                 /* Enable proper parity */
1502                 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1503                         if (IS_QLA2300(ha))
1504                                 /* SRAM parity */
1505                                 WRT_REG_WORD(&reg->isp.hccr,
1506                                     (HCCR_ENABLE_PARITY + 0x1));
1507                         else
1508                                 /* SRAM, Instruction RAM and GP RAM parity */
1509                                 WRT_REG_WORD(&reg->isp.hccr,
1510                                     (HCCR_ENABLE_PARITY + 0x7));
1511                 }
1512         }
1513         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1514
1515         ha->isp_ops.enable_intrs(ha);
1516
1517         /* v2.19.5b6 */
1518         /*
1519          * Wait around max loop_reset_delay secs for the devices to come
1520          * on-line. We don't want Linux scanning before we are ready.
1521          *
1522          */
1523         for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
1524             time_before(jiffies,wait_switch) &&
1525              !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
1526              && (ha->device_flags & SWITCH_FOUND) ;) {
1527
1528                 qla2x00_check_fabric_devices(ha);
1529
1530                 msleep(10);
1531         }
1532
1533         pci_set_drvdata(pdev, ha);
1534         ha->flags.init_done = 1;
1535         num_hosts++;
1536
1537         ret = scsi_add_host(host, &pdev->dev);
1538         if (ret)
1539                 goto probe_failed;
1540
1541         qla2x00_alloc_sysfs_attr(ha);
1542
1543         qla2x00_init_host_attr(ha);
1544
1545         qla_printk(KERN_INFO, ha, "\n"
1546             " QLogic Fibre Channel HBA Driver: %s\n"
1547             "  QLogic %s - %s\n"
1548             "  ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1549             qla2x00_version_str, ha->model_number,
1550             ha->model_desc ? ha->model_desc: "", pdev->device,
1551             ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1552             ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1553             ha->isp_ops.fw_version_str(ha, fw_str));
1554
1555         /* Go with fc_rport registration. */
1556         list_for_each_entry(fcport, &ha->fcports, list)
1557                 qla2x00_reg_remote_port(ha, fcport);
1558
1559         return 0;
1560
1561 probe_failed:
1562         qla2x00_free_device(ha);
1563
1564         scsi_host_put(host);
1565
1566 probe_disable_device:
1567         pci_disable_device(pdev);
1568
1569 probe_out:
1570         return ret;
1571 }
1572 EXPORT_SYMBOL_GPL(qla2x00_probe_one);
1573
1574 void qla2x00_remove_one(struct pci_dev *pdev)
1575 {
1576         scsi_qla_host_t *ha;
1577
1578         ha = pci_get_drvdata(pdev);
1579
1580         qla2x00_free_sysfs_attr(ha);
1581
1582         fc_remove_host(ha->host);
1583
1584         scsi_remove_host(ha->host);
1585
1586         qla2x00_free_device(ha);
1587
1588         scsi_host_put(ha->host);
1589
1590         pci_set_drvdata(pdev, NULL);
1591 }
1592 EXPORT_SYMBOL_GPL(qla2x00_remove_one);
1593
1594 static void
1595 qla2x00_free_device(scsi_qla_host_t *ha)
1596 {
1597         int ret;
1598
1599         /* Abort any outstanding IO descriptors. */
1600         if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
1601                 qla2x00_cancel_io_descriptors(ha);
1602
1603         /* Disable timer */
1604         if (ha->timer_active)
1605                 qla2x00_stop_timer(ha);
1606
1607         /* Kill the kernel thread for this host */
1608         if (ha->dpc_pid >= 0) {
1609                 ha->dpc_should_die = 1;
1610                 wmb();
1611                 ret = kill_proc(ha->dpc_pid, SIGHUP, 1);
1612                 if (ret) {
1613                         qla_printk(KERN_ERR, ha,
1614                             "Unable to signal DPC thread -- (%d)\n", ret);
1615
1616                         /* TODO: SOMETHING MORE??? */
1617                 } else {
1618                         wait_for_completion(&ha->dpc_exited);
1619                 }
1620         }
1621
1622         /* Stop currently executing firmware. */
1623         qla2x00_stop_firmware(ha);
1624
1625         /* turn-off interrupts on the card */
1626         if (ha->interrupts_on)
1627                 ha->isp_ops.disable_intrs(ha);
1628
1629         qla2x00_mem_free(ha);
1630
1631         ha->flags.online = 0;
1632
1633         /* Detach interrupts */
1634         if (ha->pdev->irq)
1635                 free_irq(ha->pdev->irq, ha);
1636
1637         /* release io space registers  */
1638         if (ha->iobase)
1639                 iounmap(ha->iobase);
1640         pci_release_regions(ha->pdev);
1641
1642         pci_disable_device(ha->pdev);
1643 }
1644
1645 /*
1646  * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1647  *
1648  * Input: ha = adapter block pointer.  fcport = port structure pointer.
1649  *
1650  * Return: None.
1651  *
1652  * Context:
1653  */
1654 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1655     int do_login)
1656 {
1657         if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
1658                 schedule_work(&fcport->rport_del_work);
1659
1660         /*
1661          * We may need to retry the login, so don't change the state of the
1662          * port but do the retries.
1663          */
1664         if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1665                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1666
1667         if (!do_login)
1668                 return;
1669
1670         if (fcport->login_retry == 0) {
1671                 fcport->login_retry = ha->login_retry_count;
1672                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1673
1674                 DEBUG(printk("scsi(%ld): Port login retry: "
1675                     "%02x%02x%02x%02x%02x%02x%02x%02x, "
1676                     "id = 0x%04x retry cnt=%d\n",
1677                     ha->host_no,
1678                     fcport->port_name[0],
1679                     fcport->port_name[1],
1680                     fcport->port_name[2],
1681                     fcport->port_name[3],
1682                     fcport->port_name[4],
1683                     fcport->port_name[5],
1684                     fcport->port_name[6],
1685                     fcport->port_name[7],
1686                     fcport->loop_id,
1687                     fcport->login_retry));
1688         }
1689 }
1690
1691 /*
1692  * qla2x00_mark_all_devices_lost
1693  *      Updates fcport state when device goes offline.
1694  *
1695  * Input:
1696  *      ha = adapter block pointer.
1697  *      fcport = port structure pointer.
1698  *
1699  * Return:
1700  *      None.
1701  *
1702  * Context:
1703  */
1704 void
1705 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha)
1706 {
1707         fc_port_t *fcport;
1708
1709         list_for_each_entry(fcport, &ha->fcports, list) {
1710                 if (fcport->port_type != FCT_TARGET)
1711                         continue;
1712
1713                 /*
1714                  * No point in marking the device as lost, if the device is
1715                  * already DEAD.
1716                  */
1717                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1718                         continue;
1719                 if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
1720                         schedule_work(&fcport->rport_del_work);
1721                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1722         }
1723 }
1724
1725 /*
1726 * qla2x00_mem_alloc
1727 *      Allocates adapter memory.
1728 *
1729 * Returns:
1730 *      0  = success.
1731 *      1  = failure.
1732 */
1733 static uint8_t
1734 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1735 {
1736         char    name[16];
1737         uint8_t   status = 1;
1738         int     retry= 10;
1739
1740         do {
1741                 /*
1742                  * This will loop only once if everything goes well, else some
1743                  * number of retries will be performed to get around a kernel
1744                  * bug where available mem is not allocated until after a
1745                  * little delay and a retry.
1746                  */
1747                 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1748                     (ha->request_q_length + 1) * sizeof(request_t),
1749                     &ha->request_dma, GFP_KERNEL);
1750                 if (ha->request_ring == NULL) {
1751                         qla_printk(KERN_WARNING, ha,
1752                             "Memory Allocation failed - request_ring\n");
1753
1754                         qla2x00_mem_free(ha);
1755                         msleep(100);
1756
1757                         continue;
1758                 }
1759
1760                 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1761                     (ha->response_q_length + 1) * sizeof(response_t),
1762                     &ha->response_dma, GFP_KERNEL);
1763                 if (ha->response_ring == NULL) {
1764                         qla_printk(KERN_WARNING, ha,
1765                             "Memory Allocation failed - response_ring\n");
1766
1767                         qla2x00_mem_free(ha);
1768                         msleep(100);
1769
1770                         continue;
1771                 }
1772
1773                 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1774                     &ha->gid_list_dma, GFP_KERNEL);
1775                 if (ha->gid_list == NULL) {
1776                         qla_printk(KERN_WARNING, ha,
1777                             "Memory Allocation failed - gid_list\n");
1778
1779                         qla2x00_mem_free(ha);
1780                         msleep(100);
1781
1782                         continue;
1783                 }
1784
1785                 ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev,
1786                     sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL);
1787                 if (ha->rlc_rsp == NULL) {
1788                         qla_printk(KERN_WARNING, ha,
1789                                 "Memory Allocation failed - rlc");
1790
1791                         qla2x00_mem_free(ha);
1792                         msleep(100);
1793
1794                         continue;
1795                 }
1796
1797                 snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no);
1798                 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1799                     DMA_POOL_SIZE, 8, 0);
1800                 if (ha->s_dma_pool == NULL) {
1801                         qla_printk(KERN_WARNING, ha,
1802                             "Memory Allocation failed - s_dma_pool\n");
1803
1804                         qla2x00_mem_free(ha);
1805                         msleep(100);
1806
1807                         continue;
1808                 }
1809
1810                 /* get consistent memory allocated for init control block */
1811                 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1812                     &ha->init_cb_dma);
1813                 if (ha->init_cb == NULL) {
1814                         qla_printk(KERN_WARNING, ha,
1815                             "Memory Allocation failed - init_cb\n");
1816
1817                         qla2x00_mem_free(ha);
1818                         msleep(100);
1819
1820                         continue;
1821                 }
1822                 memset(ha->init_cb, 0, ha->init_cb_size);
1823
1824                 /* Get consistent memory allocated for Get Port Database cmd */
1825                 ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1826                     &ha->iodesc_pd_dma);
1827                 if (ha->iodesc_pd == NULL) {
1828                         /* error */
1829                         qla_printk(KERN_WARNING, ha,
1830                             "Memory Allocation failed - iodesc_pd\n");
1831
1832                         qla2x00_mem_free(ha);
1833                         msleep(100);
1834
1835                         continue;
1836                 }
1837                 memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE);
1838
1839                 /* Allocate ioctl related memory. */
1840                 if (qla2x00_alloc_ioctl_mem(ha)) {
1841                         qla_printk(KERN_WARNING, ha,
1842                             "Memory Allocation failed - ioctl_mem\n");
1843
1844                         qla2x00_mem_free(ha);
1845                         msleep(100);
1846
1847                         continue;
1848                 }
1849
1850                 if (qla2x00_allocate_sp_pool(ha)) {
1851                         qla_printk(KERN_WARNING, ha,
1852                             "Memory Allocation failed - "
1853                             "qla2x00_allocate_sp_pool()\n");
1854
1855                         qla2x00_mem_free(ha);
1856                         msleep(100);
1857
1858                         continue;
1859                 }
1860
1861                 /* Allocate memory for SNS commands */
1862                 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1863                         /* Get consistent memory allocated for SNS commands */
1864                         ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1865                             sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1866                             GFP_KERNEL);
1867                         if (ha->sns_cmd == NULL) {
1868                                 /* error */
1869                                 qla_printk(KERN_WARNING, ha,
1870                                     "Memory Allocation failed - sns_cmd\n");
1871
1872                                 qla2x00_mem_free(ha);
1873                                 msleep(100);
1874
1875                                 continue;
1876                         }
1877                         memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1878                 } else {
1879                         /* Get consistent memory allocated for MS IOCB */
1880                         ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1881                             &ha->ms_iocb_dma);
1882                         if (ha->ms_iocb == NULL) {
1883                                 /* error */
1884                                 qla_printk(KERN_WARNING, ha,
1885                                     "Memory Allocation failed - ms_iocb\n");
1886
1887                                 qla2x00_mem_free(ha);
1888                                 msleep(100);
1889
1890                                 continue;
1891                         }
1892                         memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
1893
1894                         /*
1895                          * Get consistent memory allocated for CT SNS
1896                          * commands
1897                          */
1898                         ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
1899                             sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
1900                             GFP_KERNEL);
1901                         if (ha->ct_sns == NULL) {
1902                                 /* error */
1903                                 qla_printk(KERN_WARNING, ha,
1904                                     "Memory Allocation failed - ct_sns\n");
1905
1906                                 qla2x00_mem_free(ha);
1907                                 msleep(100);
1908
1909                                 continue;
1910                         }
1911                         memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
1912                 }
1913
1914                 /* Done all allocations without any error. */
1915                 status = 0;
1916
1917         } while (retry-- && status != 0);
1918
1919         if (status) {
1920                 printk(KERN_WARNING
1921                         "%s(): **** FAILED ****\n", __func__);
1922         }
1923
1924         return(status);
1925 }
1926
1927 /*
1928 * qla2x00_mem_free
1929 *      Frees all adapter allocated memory.
1930 *
1931 * Input:
1932 *      ha = adapter block pointer.
1933 */
1934 static void
1935 qla2x00_mem_free(scsi_qla_host_t *ha)
1936 {
1937         struct list_head        *fcpl, *fcptemp;
1938         fc_port_t       *fcport;
1939         unsigned int    wtime;/* max wait time if mbx cmd is busy. */
1940
1941         if (ha == NULL) {
1942                 /* error */
1943                 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
1944                 return;
1945         }
1946
1947         /* Make sure all other threads are stopped. */
1948         wtime = 60 * 1000;
1949         while (ha->dpc_wait && wtime)
1950                 wtime = msleep_interruptible(wtime);
1951
1952         /* free ioctl memory */
1953         qla2x00_free_ioctl_mem(ha);
1954
1955         /* free sp pool */
1956         qla2x00_free_sp_pool(ha);
1957
1958         if (ha->sns_cmd)
1959                 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
1960                     ha->sns_cmd, ha->sns_cmd_dma);
1961
1962         if (ha->ct_sns)
1963                 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
1964                     ha->ct_sns, ha->ct_sns_dma);
1965
1966         if (ha->ms_iocb)
1967                 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
1968
1969         if (ha->iodesc_pd)
1970                 dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma);
1971
1972         if (ha->init_cb)
1973                 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
1974
1975         if (ha->s_dma_pool)
1976                 dma_pool_destroy(ha->s_dma_pool);
1977
1978         if (ha->rlc_rsp)
1979                 dma_free_coherent(&ha->pdev->dev,
1980                     sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp,
1981                     ha->rlc_rsp_dma);
1982
1983         if (ha->gid_list)
1984                 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
1985                     ha->gid_list_dma);
1986
1987         if (ha->response_ring)
1988                 dma_free_coherent(&ha->pdev->dev,
1989                     (ha->response_q_length + 1) * sizeof(response_t),
1990                     ha->response_ring, ha->response_dma);
1991
1992         if (ha->request_ring)
1993                 dma_free_coherent(&ha->pdev->dev,
1994                     (ha->request_q_length + 1) * sizeof(request_t),
1995                     ha->request_ring, ha->request_dma);
1996
1997         ha->sns_cmd = NULL;
1998         ha->sns_cmd_dma = 0;
1999         ha->ct_sns = NULL;
2000         ha->ct_sns_dma = 0;
2001         ha->ms_iocb = NULL;
2002         ha->ms_iocb_dma = 0;
2003         ha->iodesc_pd = NULL;
2004         ha->iodesc_pd_dma = 0;
2005         ha->init_cb = NULL;
2006         ha->init_cb_dma = 0;
2007
2008         ha->s_dma_pool = NULL;
2009
2010         ha->rlc_rsp = NULL;
2011         ha->rlc_rsp_dma = 0;
2012         ha->gid_list = NULL;
2013         ha->gid_list_dma = 0;
2014
2015         ha->response_ring = NULL;
2016         ha->response_dma = 0;
2017         ha->request_ring = NULL;
2018         ha->request_dma = 0;
2019
2020         list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2021                 fcport = list_entry(fcpl, fc_port_t, list);
2022
2023                 /* fc ports */
2024                 list_del_init(&fcport->list);
2025                 kfree(fcport);
2026         }
2027         INIT_LIST_HEAD(&ha->fcports);
2028
2029         if (ha->fw_dump)
2030                 free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order);
2031
2032         vfree(ha->fw_dump24);
2033
2034         vfree(ha->fw_dump_buffer);
2035
2036         ha->fw_dump = NULL;
2037         ha->fw_dump24 = NULL;
2038         ha->fw_dumped = 0;
2039         ha->fw_dump_reading = 0;
2040         ha->fw_dump_buffer = NULL;
2041 }
2042
2043 /*
2044  * qla2x00_allocate_sp_pool
2045  *       This routine is called during initialization to allocate
2046  *       memory for local srb_t.
2047  *
2048  * Input:
2049  *       ha   = adapter block pointer.
2050  *
2051  * Context:
2052  *      Kernel context.
2053  *
2054  * Note: Sets the ref_count for non Null sp to one.
2055  */
2056 static int
2057 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2058 {
2059         int      rval;
2060
2061         rval = QLA_SUCCESS;
2062         ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
2063             mempool_free_slab, srb_cachep);
2064         if (ha->srb_mempool == NULL) {
2065                 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2066                 rval = QLA_FUNCTION_FAILED;
2067         }
2068         return (rval);
2069 }
2070
2071 /*
2072  *  This routine frees all adapter allocated memory.
2073  *
2074  */
2075 static void
2076 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2077 {
2078         if (ha->srb_mempool) {
2079                 mempool_destroy(ha->srb_mempool);
2080                 ha->srb_mempool = NULL;
2081         }
2082 }
2083
2084 /**************************************************************************
2085 * qla2x00_do_dpc
2086 *   This kernel thread is a task that is schedule by the interrupt handler
2087 *   to perform the background processing for interrupts.
2088 *
2089 * Notes:
2090 * This task always run in the context of a kernel thread.  It
2091 * is kick-off by the driver's detect code and starts up
2092 * up one per adapter. It immediately goes to sleep and waits for
2093 * some fibre event.  When either the interrupt handler or
2094 * the timer routine detects a event it will one of the task
2095 * bits then wake us up.
2096 **************************************************************************/
2097 static int
2098 qla2x00_do_dpc(void *data)
2099 {
2100         DECLARE_MUTEX_LOCKED(sem);
2101         scsi_qla_host_t *ha;
2102         fc_port_t       *fcport;
2103         uint8_t         status;
2104         uint16_t        next_loopid;
2105
2106         ha = (scsi_qla_host_t *)data;
2107
2108         lock_kernel();
2109
2110         daemonize("%s_dpc", ha->host_str);
2111         allow_signal(SIGHUP);
2112
2113         ha->dpc_wait = &sem;
2114
2115         set_user_nice(current, -20);
2116
2117         unlock_kernel();
2118
2119         complete(&ha->dpc_inited);
2120
2121         while (1) {
2122                 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2123
2124                 if (down_interruptible(&sem))
2125                         break;
2126
2127                 if (ha->dpc_should_die)
2128                         break;
2129
2130                 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2131
2132                 /* Initialization not yet finished. Don't do anything yet. */
2133                 if (!ha->flags.init_done || ha->dpc_active)
2134                         continue;
2135
2136                 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2137
2138                 ha->dpc_active = 1;
2139
2140                 if (ha->flags.mbox_busy) {
2141                         ha->dpc_active = 0;
2142                         continue;
2143                 }
2144
2145                 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2146
2147                         DEBUG(printk("scsi(%ld): dpc: sched "
2148                             "qla2x00_abort_isp ha = %p\n",
2149                             ha->host_no, ha));
2150                         if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2151                             &ha->dpc_flags))) {
2152
2153                                 if (qla2x00_abort_isp(ha)) {
2154                                         /* failed. retry later */
2155                                         set_bit(ISP_ABORT_NEEDED,
2156                                             &ha->dpc_flags);
2157                                 }
2158                                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2159                         }
2160                         DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2161                             ha->host_no));
2162                 }
2163
2164                 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2165                         DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2166                             ha->host_no));
2167                         qla2x00_loop_reset(ha);
2168                 }
2169
2170                 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2171                     (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2172
2173                         DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2174                             ha->host_no));
2175
2176                         qla2x00_rst_aen(ha);
2177                         clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2178                 }
2179
2180                 /* Retry each device up to login retry count */
2181                 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2182                     !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2183                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2184
2185                         DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2186                             ha->host_no));
2187
2188                         next_loopid = 0;
2189                         list_for_each_entry(fcport, &ha->fcports, list) {
2190                                 if (fcport->port_type != FCT_TARGET)
2191                                         continue;
2192
2193                                 /*
2194                                  * If the port is not ONLINE then try to login
2195                                  * to it if we haven't run out of retries.
2196                                  */
2197                                 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2198                                     fcport->login_retry) {
2199
2200                                         fcport->login_retry--;
2201                                         if (fcport->flags & FCF_FABRIC_DEVICE) {
2202                                                 if (fcport->flags &
2203                                                     FCF_TAPE_PRESENT)
2204                                                         ha->isp_ops.fabric_logout(
2205                                                             ha, fcport->loop_id,
2206                                                             fcport->d_id.b.domain,
2207                                                             fcport->d_id.b.area,
2208                                                             fcport->d_id.b.al_pa);
2209                                                 status = qla2x00_fabric_login(
2210                                                     ha, fcport, &next_loopid);
2211                                         } else
2212                                                 status =
2213                                                     qla2x00_local_device_login(
2214                                                         ha, fcport->loop_id);
2215
2216                                         if (status == QLA_SUCCESS) {
2217                                                 fcport->old_loop_id = fcport->loop_id;
2218
2219                                                 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2220                                                     ha->host_no, fcport->loop_id));
2221
2222                                                 fcport->port_login_retry_count =
2223                                                     ha->port_down_retry_count * PORT_RETRY_TIME;
2224                                                 atomic_set(&fcport->state, FCS_ONLINE);
2225                                                 atomic_set(&fcport->port_down_timer,
2226                                                     ha->port_down_retry_count * PORT_RETRY_TIME);
2227
2228                                                 fcport->login_retry = 0;
2229                                         } else if (status == 1) {
2230                                                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2231                                                 /* retry the login again */
2232                                                 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2233                                                     ha->host_no,
2234                                                     fcport->login_retry, fcport->loop_id));
2235                                         } else {
2236                                                 fcport->login_retry = 0;
2237                                         }
2238                                 }
2239                                 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2240                                         break;
2241                         }
2242                         DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2243                             ha->host_no));
2244                 }
2245
2246                 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2247                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2248
2249                         clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2250                         DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2251                             ha->host_no));
2252
2253                         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2254
2255                         DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2256                             ha->host_no));
2257                 }
2258
2259                 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2260
2261                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2262                             ha->host_no));
2263
2264                         if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2265                             &ha->dpc_flags))) {
2266
2267                                 qla2x00_loop_resync(ha);
2268
2269                                 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2270                         }
2271
2272                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2273                             ha->host_no));
2274                 }
2275
2276                 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2277
2278                         DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2279                             ha->host_no));
2280
2281                         qla2x00_rescan_fcports(ha);
2282
2283                         DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2284                             "end.\n",
2285                             ha->host_no));
2286                 }
2287
2288                 if (!ha->interrupts_on)
2289                         ha->isp_ops.enable_intrs(ha);
2290
2291                 ha->dpc_active = 0;
2292         } /* End of while(1) */
2293
2294         DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2295
2296         /*
2297          * Make sure that nobody tries to wake us up again.
2298          */
2299         ha->dpc_wait = NULL;
2300         ha->dpc_active = 0;
2301
2302         complete_and_exit(&ha->dpc_exited, 0);
2303 }
2304
2305 /*
2306 *  qla2x00_rst_aen
2307 *      Processes asynchronous reset.
2308 *
2309 * Input:
2310 *      ha  = adapter block pointer.
2311 */
2312 static void
2313 qla2x00_rst_aen(scsi_qla_host_t *ha)
2314 {
2315         if (ha->flags.online && !ha->flags.reset_active &&
2316             !atomic_read(&ha->loop_down_timer) &&
2317             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2318                 do {
2319                         clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2320
2321                         /*
2322                          * Issue marker command only when we are going to start
2323                          * the I/O.
2324                          */
2325                         ha->marker_needed = 1;
2326                 } while (!atomic_read(&ha->loop_down_timer) &&
2327                     (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2328         }
2329 }
2330
2331 static void
2332 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2333 {
2334         struct scsi_cmnd *cmd = sp->cmd;
2335
2336         if (sp->flags & SRB_DMA_VALID) {
2337                 if (cmd->use_sg) {
2338                         dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2339                             cmd->use_sg, cmd->sc_data_direction);
2340                 } else if (cmd->request_bufflen) {
2341                         dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2342                             cmd->request_bufflen, cmd->sc_data_direction);
2343                 }
2344                 sp->flags &= ~SRB_DMA_VALID;
2345         }
2346         CMD_SP(cmd) = NULL;
2347 }
2348
2349 void
2350 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2351 {
2352         struct scsi_cmnd *cmd = sp->cmd;
2353
2354         qla2x00_sp_free_dma(ha, sp);
2355
2356         mempool_free(sp, ha->srb_mempool);
2357
2358         cmd->scsi_done(cmd);
2359 }
2360
2361 /**************************************************************************
2362 *   qla2x00_timer
2363 *
2364 * Description:
2365 *   One second timer
2366 *
2367 * Context: Interrupt
2368 ***************************************************************************/
2369 static void
2370 qla2x00_timer(scsi_qla_host_t *ha)
2371 {
2372         unsigned long   cpu_flags = 0;
2373         fc_port_t       *fcport;
2374         int             start_dpc = 0;
2375         int             index;
2376         srb_t           *sp;
2377         int             t;
2378
2379         /*
2380          * Ports - Port down timer.
2381          *
2382          * Whenever, a port is in the LOST state we start decrementing its port
2383          * down timer every second until it reaches zero. Once  it reaches zero
2384          * the port it marked DEAD.
2385          */
2386         t = 0;
2387         list_for_each_entry(fcport, &ha->fcports, list) {
2388                 if (fcport->port_type != FCT_TARGET)
2389                         continue;
2390
2391                 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2392
2393                         if (atomic_read(&fcport->port_down_timer) == 0)
2394                                 continue;
2395
2396                         if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2397                                 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2398
2399                         DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2400                             "%d remaining\n",
2401                             ha->host_no,
2402                             t, atomic_read(&fcport->port_down_timer)));
2403                 }
2404                 t++;
2405         } /* End of for fcport  */
2406
2407
2408         /* Loop down handler. */
2409         if (atomic_read(&ha->loop_down_timer) > 0 &&
2410             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2411
2412                 if (atomic_read(&ha->loop_down_timer) ==
2413                     ha->loop_down_abort_time) {
2414
2415                         DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2416                             "queues before time expire\n",
2417                             ha->host_no));
2418
2419                         if (!IS_QLA2100(ha) && ha->link_down_timeout)
2420                                 atomic_set(&ha->loop_state, LOOP_DEAD);
2421
2422                         /* Schedule an ISP abort to return any tape commands. */
2423                         spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2424                         for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2425                             index++) {
2426                                 fc_port_t *sfcp;
2427
2428                                 sp = ha->outstanding_cmds[index];
2429                                 if (!sp)
2430                                         continue;
2431                                 sfcp = sp->fcport;
2432                                 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2433                                         continue;
2434
2435                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2436                                 break;
2437                         }
2438                         spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2439
2440                         set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2441                         start_dpc++;
2442                 }
2443
2444                 /* if the loop has been down for 4 minutes, reinit adapter */
2445                 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2446                         DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2447                             "restarting queues.\n",
2448                             ha->host_no));
2449
2450                         set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2451                         start_dpc++;
2452
2453                         if (!(ha->device_flags & DFLG_NO_CABLE)) {
2454                                 DEBUG(printk("scsi(%ld): Loop down - "
2455                                     "aborting ISP.\n",
2456                                     ha->host_no));
2457                                 qla_printk(KERN_WARNING, ha,
2458                                     "Loop down - aborting ISP.\n");
2459
2460                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2461                         }
2462                 }
2463                 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2464                     ha->host_no,
2465                     atomic_read(&ha->loop_down_timer)));
2466         }
2467
2468         /* Schedule the DPC routine if needed */
2469         if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2470             test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2471             test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2472             start_dpc ||
2473             test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2474             test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2475             test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2476             ha->dpc_wait && !ha->dpc_active) {
2477
2478                 up(ha->dpc_wait);
2479         }
2480
2481         qla2x00_restart_timer(ha, WATCH_INTERVAL);
2482 }
2483
2484 /* XXX(hch): crude hack to emulate a down_timeout() */
2485 int
2486 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2487 {
2488         const unsigned int step = 100; /* msecs */
2489         unsigned int iterations = jiffies_to_msecs(timeout)/100;
2490
2491         do {
2492                 if (!down_trylock(sema))
2493                         return 0;
2494                 if (msleep_interruptible(step))
2495                         break;
2496         } while (--iterations >= 0);
2497
2498         return -ETIMEDOUT;
2499 }
2500
2501 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2502
2503 #define qla2x00_release_firmware()      do { } while (0)
2504 #define qla2x00_pci_module_init()       (0)
2505 #define qla2x00_pci_module_exit()       do { } while (0)
2506
2507 #else   /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
2508
2509 /* Firmware interface routines. */
2510
2511 #define FW_BLOBS        6
2512 #define FW_ISP21XX      0
2513 #define FW_ISP22XX      1
2514 #define FW_ISP2300      2
2515 #define FW_ISP2322      3
2516 #define FW_ISP63XX      4
2517 #define FW_ISP24XX      5
2518
2519 static DECLARE_MUTEX(qla_fw_lock);
2520
2521 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2522         { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
2523         { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
2524         { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
2525         { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2526         { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
2527         { .name = "ql2400_fw.bin", },
2528 };
2529
2530 struct fw_blob *
2531 qla2x00_request_firmware(scsi_qla_host_t *ha)
2532 {
2533         struct fw_blob *blob;
2534
2535         blob = NULL;
2536         if (IS_QLA2100(ha)) {
2537                 blob = &qla_fw_blobs[FW_ISP21XX];
2538         } else if (IS_QLA2200(ha)) {
2539                 blob = &qla_fw_blobs[FW_ISP22XX];
2540         } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
2541                 blob = &qla_fw_blobs[FW_ISP2300];
2542         } else if (IS_QLA2322(ha)) {
2543                 blob = &qla_fw_blobs[FW_ISP2322];
2544         } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
2545                 blob = &qla_fw_blobs[FW_ISP63XX];
2546         } else if (IS_QLA24XX(ha)) {
2547                 blob = &qla_fw_blobs[FW_ISP24XX];
2548         }
2549
2550         down(&qla_fw_lock);
2551         if (blob->fw)
2552                 goto out;
2553
2554         if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2555                 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2556                     "(%s).\n", ha->host_no, blob->name));
2557                 blob->fw = NULL;
2558                 blob = NULL;
2559                 goto out;
2560         }
2561
2562 out:
2563         up(&qla_fw_lock);
2564         return blob;
2565 }
2566
2567 static void
2568 qla2x00_release_firmware(void)
2569 {
2570         int idx;
2571
2572         down(&qla_fw_lock);
2573         for (idx = 0; idx < FW_BLOBS; idx++)
2574                 if (qla_fw_blobs[idx].fw)
2575                         release_firmware(qla_fw_blobs[idx].fw);
2576         up(&qla_fw_lock);
2577 }
2578
2579 static struct qla_board_info qla_board_tbl = {
2580         .drv_name       = "qla2xxx",
2581 };
2582
2583 static struct pci_device_id qla2xxx_pci_tbl[] = {
2584         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
2585                 PCI_ANY_ID, PCI_ANY_ID, },
2586         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
2587                 PCI_ANY_ID, PCI_ANY_ID, },
2588         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300,
2589                 PCI_ANY_ID, PCI_ANY_ID, },
2590         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312,
2591                 PCI_ANY_ID, PCI_ANY_ID, },
2592         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322,
2593                 PCI_ANY_ID, PCI_ANY_ID, },
2594         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312,
2595                 PCI_ANY_ID, PCI_ANY_ID, },
2596         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322,
2597                 PCI_ANY_ID, PCI_ANY_ID, },
2598         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422,
2599                 PCI_ANY_ID, PCI_ANY_ID, },
2600         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432,
2601                 PCI_ANY_ID, PCI_ANY_ID, },
2602         { 0 },
2603 };
2604 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2605
2606 static int __devinit
2607 qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
2608 {
2609         return qla2x00_probe_one(pdev, &qla_board_tbl);
2610 }
2611
2612 static void __devexit
2613 qla2xxx_remove_one(struct pci_dev *pdev)
2614 {
2615         qla2x00_remove_one(pdev);
2616 }
2617
2618 static struct pci_driver qla2xxx_pci_driver = {
2619         .name           = "qla2xxx",
2620         .driver         = {
2621                 .owner          = THIS_MODULE,
2622         },
2623         .id_table       = qla2xxx_pci_tbl,
2624         .probe          = qla2xxx_probe_one,
2625         .remove         = __devexit_p(qla2xxx_remove_one),
2626 };
2627
2628 static inline int
2629 qla2x00_pci_module_init(void)
2630 {
2631         return pci_module_init(&qla2xxx_pci_driver);
2632 }
2633
2634 static inline void
2635 qla2x00_pci_module_exit(void)
2636 {
2637         pci_unregister_driver(&qla2xxx_pci_driver);
2638 }
2639
2640 #endif
2641
2642 /**
2643  * qla2x00_module_init - Module initialization.
2644  **/
2645 static int __init
2646 qla2x00_module_init(void)
2647 {
2648         int ret = 0;
2649
2650         /* Allocate cache for SRBs. */
2651         srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2652             SLAB_HWCACHE_ALIGN, NULL, NULL);
2653         if (srb_cachep == NULL) {
2654                 printk(KERN_ERR
2655                     "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2656                 return -ENOMEM;
2657         }
2658
2659         /* Derive version string. */
2660         strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2661 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2662         strcat(qla2x00_version_str, "-fw");
2663 #endif
2664 #if DEBUG_QLA2100
2665         strcat(qla2x00_version_str, "-debug");
2666 #endif
2667         qla2xxx_transport_template =
2668             fc_attach_transport(&qla2xxx_transport_functions);
2669         if (!qla2xxx_transport_template)
2670                 return -ENODEV;
2671
2672         printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2673         ret = qla2x00_pci_module_init();
2674         if (ret) {
2675                 kmem_cache_destroy(srb_cachep);
2676                 fc_release_transport(qla2xxx_transport_template);
2677         }
2678         return ret;
2679 }
2680
2681 /**
2682  * qla2x00_module_exit - Module cleanup.
2683  **/
2684 static void __exit
2685 qla2x00_module_exit(void)
2686 {
2687         qla2x00_pci_module_exit();
2688         qla2x00_release_firmware();
2689         kmem_cache_destroy(srb_cachep);
2690         fc_release_transport(qla2xxx_transport_template);
2691 }
2692
2693 module_init(qla2x00_module_init);
2694 module_exit(qla2x00_module_exit);
2695
2696 MODULE_AUTHOR("QLogic Corporation");
2697 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2698 MODULE_LICENSE("GPL");
2699 MODULE_VERSION(QLA2XXX_VERSION);