drivers/scsi/qla2xxx/qla_os.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/moduleparam.h>
  10 #include <linux/vmalloc.h>
  11 #include <linux/smp_lock.h>
  12 #include <linux/delay.h>
  13
  14 #include <scsi/scsi_tcq.h>
  15 #include <scsi/scsicam.h>
  16 #include <scsi/scsi_transport.h>
  17 #include <scsi/scsi_transport_fc.h>
  18
  19 /*
  20  * Driver version
  21  */
  22 char qla2x00_version_str[40];
  23
  24 /*
  25  * SRB allocation cache
  26  */
  27 static kmem_cache_t *srb_cachep;
  28
  29 /*
  30  * Ioctl related information.
  31  */
  32 static int num_hosts;
  33
  34 int ql2xlogintimeout = 20;
  35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
  36 MODULE_PARM_DESC(ql2xlogintimeout,
  37                 "Login timeout value in seconds.");
  38
  39 int qlport_down_retry = 30;
  40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
  41 MODULE_PARM_DESC(qlport_down_retry,
  42                 "Maximum number of command retries to a port that returns"
  43                 "a PORT-DOWN status.");
  44
  45 int ql2xplogiabsentdevice;
  46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
  47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
  48                 "Option to enable PLOGI to devices that are not present after "
  49                 "a Fabric scan.  This is needed for several broken switches."
  50                 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
  51
  52 int ql2xloginretrycount = 0;
  53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
  54 MODULE_PARM_DESC(ql2xloginretrycount,
  55                 "Specify an alternate value for the NVRAM login retry count.");
  56
  57 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
  58 int ql2xfwloadflash;
  59 module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
  60 MODULE_PARM_DESC(ql2xfwloadflash,
  61                 "Load ISP24xx firmware image from FLASH (onboard memory).");
  62 #endif
  63
  64 static void qla2x00_free_device(scsi_qla_host_t *);
  65
  66 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
  67
  68 int ql2xfdmienable;
  69 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
  70 MODULE_PARM_DESC(ql2xfdmienable,
  71                 "Enables FDMI registratons "
  72                 "Default is 0 - no FDMI. 1 - perfom FDMI.");
  73
  74 int ql2xprocessrscn;
  75 module_param(ql2xprocessrscn, int, S_IRUGO|S_IRUSR);
  76 MODULE_PARM_DESC(ql2xprocessrscn,
  77                 "Option to enable port RSCN handling via a series of less"
  78                 "fabric intrusive ADISCs and PLOGIs.");
  79
  80 /*
  81  * SCSI host template entry points
  82  */
  83 static int qla2xxx_slave_configure(struct scsi_device * device);
  84 static int qla2xxx_slave_alloc(struct scsi_device *);
  85 static void qla2xxx_slave_destroy(struct scsi_device *);
  86 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
  87                 void (*fn)(struct scsi_cmnd *));
  88 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
  89                 void (*fn)(struct scsi_cmnd *));
  90 static int qla2xxx_eh_abort(struct scsi_cmnd *);
  91 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
  92 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
  93 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
  94 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
  95 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
  96
  97 static int qla2x00_change_queue_depth(struct scsi_device *, int);
  98 static int qla2x00_change_queue_type(struct scsi_device *, int);
  99
 100 static struct scsi_host_template qla2x00_driver_template = {
 101         .module                 = THIS_MODULE,
 102         .name                   = "qla2xxx",
 103         .queuecommand           = qla2x00_queuecommand,
 104
 105         .eh_abort_handler       = qla2xxx_eh_abort,
 106         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 107         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 108         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 109
 110         .slave_configure        = qla2xxx_slave_configure,
 111
 112         .slave_alloc            = qla2xxx_slave_alloc,
 113         .slave_destroy          = qla2xxx_slave_destroy,
 114         .change_queue_depth     = qla2x00_change_queue_depth,
 115         .change_queue_type      = qla2x00_change_queue_type,
 116         .this_id                = -1,
 117         .cmd_per_lun            = 3,
 118         .use_clustering         = ENABLE_CLUSTERING,
 119         .sg_tablesize           = SG_ALL,
 120
 121         /*
 122          * The RISC allows for each command to transfer (2^32-1) bytes of data,
 123          * which equates to 0x800000 sectors.
 124          */
 125         .max_sectors            = 0xFFFF,
 126         .shost_attrs            = qla2x00_host_attrs,
 127 };
 128
 129 static struct scsi_host_template qla24xx_driver_template = {
 130         .module                 = THIS_MODULE,
 131         .name                   = "qla2xxx",
 132         .queuecommand           = qla24xx_queuecommand,
 133
 134         .eh_abort_handler       = qla2xxx_eh_abort,
 135         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 136         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 137         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 138
 139         .slave_configure        = qla2xxx_slave_configure,
 140
 141         .slave_alloc            = qla2xxx_slave_alloc,
 142         .slave_destroy          = qla2xxx_slave_destroy,
 143         .change_queue_depth     = qla2x00_change_queue_depth,
 144         .change_queue_type      = qla2x00_change_queue_type,
 145         .this_id                = -1,
 146         .cmd_per_lun            = 3,
 147         .use_clustering         = ENABLE_CLUSTERING,
 148         .sg_tablesize           = SG_ALL,
 149
 150         .max_sectors            = 0xFFFF,
 151         .shost_attrs            = qla2x00_host_attrs,
 152 };
 153
 154 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
 155
 156 /* TODO Convert to inlines
 157  *
 158  * Timer routines
 159  */
 160 #define WATCH_INTERVAL          1       /* number of seconds */
 161
 162 static void qla2x00_timer(scsi_qla_host_t *);
 163
 164 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
 165     void *, unsigned long);
 166 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
 167 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
 168
 169 static inline void
 170 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
 171 {
 172         init_timer(&ha->timer);
 173         ha->timer.expires = jiffies + interval * HZ;
 174         ha->timer.data = (unsigned long)ha;
 175         ha->timer.function = (void (*)(unsigned long))func;
 176         add_timer(&ha->timer);
 177         ha->timer_active = 1;
 178 }
 179
 180 static inline void
 181 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
 182 {
 183         mod_timer(&ha->timer, jiffies + interval * HZ);
 184 }
 185
 186 static __inline__ void
 187 qla2x00_stop_timer(scsi_qla_host_t *ha)
 188 {
 189         del_timer_sync(&ha->timer);
 190         ha->timer_active = 0;
 191 }
 192
 193 static int qla2x00_do_dpc(void *data);
 194
 195 static void qla2x00_rst_aen(scsi_qla_host_t *);
 196
 197 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
 198 static void qla2x00_mem_free(scsi_qla_host_t *ha);
 199 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
 200 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
 201 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
 202 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
 203
 204 /* -------------------------------------------------------------------------- */
 205
 206 static char *
 207 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
 208 {
 209         static char *pci_bus_modes[] = {
 210                 "33", "66", "100", "133",
 211         };
 212         uint16_t pci_bus;
 213
 214         strcpy(str, "PCI");
 215         pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
 216         if (pci_bus) {
 217                 strcat(str, "-X (");
 218                 strcat(str, pci_bus_modes[pci_bus]);
 219         } else {
 220                 pci_bus = (ha->pci_attr & BIT_8) >> 8;
 221                 strcat(str, " (");
 222                 strcat(str, pci_bus_modes[pci_bus]);
 223         }
 224         strcat(str, " MHz)");
 225
 226         return (str);
 227 }
 228
 229 static char *
 230 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
 231 {
 232         static char *pci_bus_modes[] = { "33", "66", "100", "133", };
 233         uint32_t pci_bus;
 234         int pcie_reg;
 235
 236         pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
 237         if (pcie_reg) {
 238                 char lwstr[6];
 239                 uint16_t pcie_lstat, lspeed, lwidth;
 240
 241                 pcie_reg += 0x12;
 242                 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 243                 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 244                 lwidth = (pcie_lstat &
 245                     (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
 246
 247                 strcpy(str, "PCIe (");
 248                 if (lspeed == 1)
 249                         strcat(str, "2.5Gb/s ");
 250                 else
 251                         strcat(str, "<unknown> ");
 252                 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
 253                 strcat(str, lwstr);
 254
 255                 return str;
 256         }
 257
 258         strcpy(str, "PCI");
 259         pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
 260         if (pci_bus == 0 || pci_bus == 8) {
 261                 strcat(str, " (");
 262                 strcat(str, pci_bus_modes[pci_bus >> 3]);
 263         } else {
 264                 strcat(str, "-X ");
 265                 if (pci_bus & BIT_2)
 266                         strcat(str, "Mode 2");
 267                 else
 268                         strcat(str, "Mode 1");
 269                 strcat(str, " (");
 270                 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
 271         }
 272         strcat(str, " MHz)");
 273
 274         return str;
 275 }
 276
 277 char *
 278 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 279 {
 280         char un_str[10];
 281
 282         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 283             ha->fw_minor_version,
 284             ha->fw_subminor_version);
 285
 286         if (ha->fw_attributes & BIT_9) {
 287                 strcat(str, "FLX");
 288                 return (str);
 289         }
 290
 291         switch (ha->fw_attributes & 0xFF) {
 292         case 0x7:
 293                 strcat(str, "EF");
 294                 break;
 295         case 0x17:
 296                 strcat(str, "TP");
 297                 break;
 298         case 0x37:
 299                 strcat(str, "IP");
 300                 break;
 301         case 0x77:
 302                 strcat(str, "VI");
 303                 break;
 304         default:
 305                 sprintf(un_str, "(%x)", ha->fw_attributes);
 306                 strcat(str, un_str);
 307                 break;
 308         }
 309         if (ha->fw_attributes & 0x100)
 310                 strcat(str, "X");
 311
 312         return (str);
 313 }
 314
 315 char *
 316 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 317 {
 318         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 319             ha->fw_minor_version,
 320             ha->fw_subminor_version);
 321
 322         if (ha->fw_attributes & BIT_0)
 323                 strcat(str, "[Class 2] ");
 324         if (ha->fw_attributes & BIT_1)
 325                 strcat(str, "[IP] ");
 326         if (ha->fw_attributes & BIT_2)
 327                 strcat(str, "[Multi-ID] ");
 328         if (ha->fw_attributes & BIT_13)
 329                 strcat(str, "[Experimental]");
 330         return str;
 331 }
 332
 333 static inline srb_t *
 334 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
 335     struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 336 {
 337         srb_t *sp;
 338
 339         sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
 340         if (!sp)
 341                 return sp;
 342
 343         atomic_set(&sp->ref_count, 1);
 344         sp->ha = ha;
 345         sp->fcport = fcport;
 346         sp->cmd = cmd;
 347         sp->flags = 0;
 348         CMD_SP(cmd) = (void *)sp;
 349         cmd->scsi_done = done;
 350
 351         return sp;
 352 }
 353
 354 static int
 355 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 356 {
 357         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 358         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 359         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 360         srb_t *sp;
 361         int rval;
 362
 363         rval = fc_remote_port_chkready(rport);
 364         if (rval) {
 365                 cmd->result = rval;
 366                 goto qc_fail_command;
 367         }
 368
 369         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 370                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 371                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 372                         cmd->result = DID_NO_CONNECT << 16;
 373                         goto qc_fail_command;
 374                 }
 375                 goto qc_host_busy;
 376         }
 377
 378         spin_unlock_irq(ha->host->host_lock);
 379
 380         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 381         if (!sp)
 382                 goto qc_host_busy_lock;
 383
 384         rval = qla2x00_start_scsi(sp);
 385         if (rval != QLA_SUCCESS)
 386                 goto qc_host_busy_free_sp;
 387
 388         spin_lock_irq(ha->host->host_lock);
 389
 390         return 0;
 391
 392 qc_host_busy_free_sp:
 393         qla2x00_sp_free_dma(ha, sp);
 394         mempool_free(sp, ha->srb_mempool);
 395
 396 qc_host_busy_lock:
 397         spin_lock_irq(ha->host->host_lock);
 398
 399 qc_host_busy:
 400         return SCSI_MLQUEUE_HOST_BUSY;
 401
 402 qc_fail_command:
 403         done(cmd);
 404
 405         return 0;
 406 }
 407
 408
 409 static int
 410 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 411 {
 412         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 413         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 414         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 415         srb_t *sp;
 416         int rval;
 417
 418         rval = fc_remote_port_chkready(rport);
 419         if (rval) {
 420                 cmd->result = rval;
 421                 goto qc24_fail_command;
 422         }
 423
 424         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 425                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 426                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 427                         cmd->result = DID_NO_CONNECT << 16;
 428                         goto qc24_fail_command;
 429                 }
 430                 goto qc24_host_busy;
 431         }
 432
 433         spin_unlock_irq(ha->host->host_lock);
 434
 435         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 436         if (!sp)
 437                 goto qc24_host_busy_lock;
 438
 439         rval = qla24xx_start_scsi(sp);
 440         if (rval != QLA_SUCCESS)
 441                 goto qc24_host_busy_free_sp;
 442
 443         spin_lock_irq(ha->host->host_lock);
 444
 445         return 0;
 446
 447 qc24_host_busy_free_sp:
 448         qla2x00_sp_free_dma(ha, sp);
 449         mempool_free(sp, ha->srb_mempool);
 450
 451 qc24_host_busy_lock:
 452         spin_lock_irq(ha->host->host_lock);
 453
 454 qc24_host_busy:
 455         return SCSI_MLQUEUE_HOST_BUSY;
 456
 457 qc24_fail_command:
 458         done(cmd);
 459
 460         return 0;
 461 }
 462
 463
 464 /*
 465  * qla2x00_eh_wait_on_command
 466  *    Waits for the command to be returned by the Firmware for some
 467  *    max time.
 468  *
 469  * Input:
 470  *    ha = actual ha whose done queue will contain the command
 471  *            returned by firmware.
 472  *    cmd = Scsi Command to wait on.
 473  *    flag = Abort/Reset(Bus or Device Reset)
 474  *
 475  * Return:
 476  *    Not Found : 0
 477  *    Found : 1
 478  */
 479 static int
 480 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
 481 {
 482 #define ABORT_POLLING_PERIOD    1000
 483 #define ABORT_WAIT_ITER         ((10 * 1000) / (ABORT_POLLING_PERIOD))
 484         unsigned long wait_iter = ABORT_WAIT_ITER;
 485         int ret = QLA_SUCCESS;
 486
 487         while (CMD_SP(cmd)) {
 488                 msleep(ABORT_POLLING_PERIOD);
 489
 490                 if (--wait_iter)
 491                         break;
 492         }
 493         if (CMD_SP(cmd))
 494                 ret = QLA_FUNCTION_FAILED;
 495
 496         return ret;
 497 }
 498
 499 /*
 500  * qla2x00_wait_for_hba_online
 501  *    Wait till the HBA is online after going through
 502  *    <= MAX_RETRIES_OF_ISP_ABORT  or
 503  *    finally HBA is disabled ie marked offline
 504  *
 505  * Input:
 506  *     ha - pointer to host adapter structure
 507  *
 508  * Note:
 509  *    Does context switching-Release SPIN_LOCK
 510  *    (if any) before calling this routine.
 511  *
 512  * Return:
 513  *    Success (Adapter is online) : 0
 514  *    Failed  (Adapter is offline/disabled) : 1
 515  */
 516 static int
 517 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
 518 {
 519         int             return_status;
 520         unsigned long   wait_online;
 521
 522         wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 523         while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
 524             test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
 525             test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
 526             ha->dpc_active) && time_before(jiffies, wait_online)) {
 527
 528                 msleep(1000);
 529         }
 530         if (ha->flags.online)
 531                 return_status = QLA_SUCCESS;
 532         else
 533                 return_status = QLA_FUNCTION_FAILED;
 534
 535         DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
 536
 537         return (return_status);
 538 }
 539
 540 /*
 541  * qla2x00_wait_for_loop_ready
 542  *    Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
 543  *    to be in LOOP_READY state.
 544  * Input:
 545  *     ha - pointer to host adapter structure
 546  *
 547  * Note:
 548  *    Does context switching-Release SPIN_LOCK
 549  *    (if any) before calling this routine.
 550  *
 551  *
 552  * Return:
 553  *    Success (LOOP_READY) : 0
 554  *    Failed  (LOOP_NOT_READY) : 1
 555  */
 556 static inline int
 557 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 558 {
 559         int      return_status = QLA_SUCCESS;
 560         unsigned long loop_timeout ;
 561
 562         /* wait for 5 min at the max for loop to be ready */
 563         loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 564
 565         while ((!atomic_read(&ha->loop_down_timer) &&
 566             atomic_read(&ha->loop_state) == LOOP_DOWN) ||
 567             atomic_read(&ha->loop_state) != LOOP_READY) {
 568                 msleep(1000);
 569                 if (time_after_eq(jiffies, loop_timeout)) {
 570                         return_status = QLA_FUNCTION_FAILED;
 571                         break;
 572                 }
 573         }
 574         return (return_status);
 575 }
 576
 577 /**************************************************************************
 578 * qla2xxx_eh_abort
 579 *
 580 * Description:
 581 *    The abort function will abort the specified command.
 582 *
 583 * Input:
 584 *    cmd = Linux SCSI command packet to be aborted.
 585 *
 586 * Returns:
 587 *    Either SUCCESS or FAILED.
 588 *
 589 * Note:
 590 **************************************************************************/
 591 int
 592 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 593 {
 594         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 595         srb_t *sp;
 596         int ret, i;
 597         unsigned int id, lun;
 598         unsigned long serial;
 599         unsigned long flags;
 600
 601         if (!CMD_SP(cmd))
 602                 return FAILED;
 603
 604         ret = FAILED;
 605
 606         id = cmd->device->id;
 607         lun = cmd->device->lun;
 608         serial = cmd->serial_number;
 609
 610         /* Check active list for command command. */
 611         spin_lock_irqsave(&ha->hardware_lock, flags);
 612         for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 613                 sp = ha->outstanding_cmds[i];
 614
 615                 if (sp == NULL)
 616                         continue;
 617
 618                 if (sp->cmd != cmd)
 619                         continue;
 620
 621                 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld "
 622                     "sp->state=%x\n", __func__, ha->host_no, sp, serial,
 623                     sp->state));
 624                 DEBUG3(qla2x00_print_scsi_cmd(cmd);)
 625
 626                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 627                 if (ha->isp_ops.abort_command(ha, sp)) {
 628                         DEBUG2(printk("%s(%ld): abort_command "
 629                             "mbx failed.\n", __func__, ha->host_no));
 630                 } else {
 631                         DEBUG3(printk("%s(%ld): abort_command "
 632                             "mbx success.\n", __func__, ha->host_no));
 633                         ret = SUCCESS;
 634                 }
 635                 spin_lock_irqsave(&ha->hardware_lock, flags);
 636
 637                 break;
 638         }
 639         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 640
 641         /* Wait for the command to be returned. */
 642         if (ret == SUCCESS) {
 643                 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 644                         qla_printk(KERN_ERR, ha,
 645                             "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 646                             "%x.\n", ha->host_no, id, lun, serial, ret);
 647                 }
 648         }
 649
 650         qla_printk(KERN_INFO, ha,
 651             "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
 652             id, lun, serial, ret);
 653
 654         return ret;
 655 }
 656
 657 /**************************************************************************
 658 * qla2x00_eh_wait_for_pending_target_commands
 659 *
 660 * Description:
 661 *    Waits for all the commands to come back from the specified target.
 662 *
 663 * Input:
 664 *    ha - pointer to scsi_qla_host structure.
 665 *    t  - target
 666 * Returns:
 667 *    Either SUCCESS or FAILED.
 668 *
 669 * Note:
 670 **************************************************************************/
 671 static int
 672 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 673 {
 674         int     cnt;
 675         int     status;
 676         srb_t           *sp;
 677         struct scsi_cmnd *cmd;
 678         unsigned long flags;
 679
 680         status = 0;
 681
 682         /*
 683          * Waiting for all commands for the designated target in the active
 684          * array
 685          */
 686         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 687                 spin_lock_irqsave(&ha->hardware_lock, flags);
 688                 sp = ha->outstanding_cmds[cnt];
 689                 if (sp) {
 690                         cmd = sp->cmd;
 691                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 692                         if (cmd->device->id == t) {
 693                                 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
 694                                         status = 1;
 695                                         break;
 696                                 }
 697                         }
 698                 } else {
 699                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 700                 }
 701         }
 702         return (status);
 703 }
 704
 705
 706 /**************************************************************************
 707 * qla2xxx_eh_device_reset
 708 *
 709 * Description:
 710 *    The device reset function will reset the target and abort any
 711 *    executing commands.
 712 *
 713 *    NOTE: The use of SP is undefined within this context.  Do *NOT*
 714 *          attempt to use this value, even if you determine it is
 715 *          non-null.
 716 *
 717 * Input:
 718 *    cmd = Linux SCSI command packet of the command that cause the
 719 *          bus device reset.
 720 *
 721 * Returns:
 722 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 723 *
 724 **************************************************************************/
 725 int
 726 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 727 {
 728         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 729         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 730         srb_t *sp;
 731         int ret;
 732         unsigned int id, lun;
 733         unsigned long serial;
 734
 735         ret = FAILED;
 736
 737         id = cmd->device->id;
 738         lun = cmd->device->lun;
 739         serial = cmd->serial_number;
 740
 741         sp = (srb_t *) CMD_SP(cmd);
 742         if (!sp || !fcport)
 743                 return ret;
 744
 745         qla_printk(KERN_INFO, ha,
 746             "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
 747
 748         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 749                 goto eh_dev_reset_done;
 750
 751         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 752                 if (qla2x00_device_reset(ha, fcport) == 0)
 753                         ret = SUCCESS;
 754
 755 #if defined(LOGOUT_AFTER_DEVICE_RESET)
 756                 if (ret == SUCCESS) {
 757                         if (fcport->flags & FC_FABRIC_DEVICE) {
 758                                 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
 759                                 qla2x00_mark_device_lost(ha, fcport, 0, 0);
 760                         }
 761                 }
 762 #endif
 763         } else {
 764                 DEBUG2(printk(KERN_INFO
 765                     "%s failed: loop not ready\n",__func__);)
 766         }
 767
 768         if (ret == FAILED) {
 769                 DEBUG3(printk("%s(%ld): device reset failed\n",
 770                     __func__, ha->host_no));
 771                 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
 772                     __func__);
 773
 774                 goto eh_dev_reset_done;
 775         }
 776
 777         /* Flush outstanding commands. */
 778         if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
 779                 ret = FAILED;
 780         if (ret == FAILED) {
 781                 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
 782                     __func__, ha->host_no));
 783                 qla_printk(KERN_INFO, ha,
 784                     "%s: failed while waiting for commands\n", __func__);
 785         } else
 786                 qla_printk(KERN_INFO, ha,
 787                     "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
 788                     id, lun);
 789  eh_dev_reset_done:
 790         return ret;
 791 }
 792
 793 /**************************************************************************
 794 * qla2x00_eh_wait_for_pending_commands
 795 *
 796 * Description:
 797 *    Waits for all the commands to come back from the specified host.
 798 *
 799 * Input:
 800 *    ha - pointer to scsi_qla_host structure.
 801 *
 802 * Returns:
 803 *    1 : SUCCESS
 804 *    0 : FAILED
 805 *
 806 * Note:
 807 **************************************************************************/
 808 static int
 809 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 810 {
 811         int     cnt;
 812         int     status;
 813         srb_t           *sp;
 814         struct scsi_cmnd *cmd;
 815         unsigned long flags;
 816
 817         status = 1;
 818
 819         /*
 820          * Waiting for all commands for the designated target in the active
 821          * array
 822          */
 823         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 824                 spin_lock_irqsave(&ha->hardware_lock, flags);
 825                 sp = ha->outstanding_cmds[cnt];
 826                 if (sp) {
 827                         cmd = sp->cmd;
 828                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 829                         status = qla2x00_eh_wait_on_command(ha, cmd);
 830                         if (status == 0)
 831                                 break;
 832                 }
 833                 else {
 834                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 835                 }
 836         }
 837         return (status);
 838 }
 839
 840
 841 /**************************************************************************
 842 * qla2xxx_eh_bus_reset
 843 *
 844 * Description:
 845 *    The bus reset function will reset the bus and abort any executing
 846 *    commands.
 847 *
 848 * Input:
 849 *    cmd = Linux SCSI command packet of the command that cause the
 850 *          bus reset.
 851 *
 852 * Returns:
 853 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 854 *
 855 **************************************************************************/
 856 int
 857 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 858 {
 859         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 860         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 861         srb_t *sp;
 862         int ret;
 863         unsigned int id, lun;
 864         unsigned long serial;
 865
 866         ret = FAILED;
 867
 868         id = cmd->device->id;
 869         lun = cmd->device->lun;
 870         serial = cmd->serial_number;
 871
 872         sp = (srb_t *) CMD_SP(cmd);
 873         if (!sp || !fcport)
 874                 return ret;
 875
 876         qla_printk(KERN_INFO, ha,
 877             "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
 878
 879         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
 880                 DEBUG2(printk("%s failed:board disabled\n",__func__));
 881                 goto eh_bus_reset_done;
 882         }
 883
 884         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 885                 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
 886                         ret = SUCCESS;
 887         }
 888         if (ret == FAILED)
 889                 goto eh_bus_reset_done;
 890
 891         /* Flush outstanding commands. */
 892         if (!qla2x00_eh_wait_for_pending_commands(ha))
 893                 ret = FAILED;
 894
 895 eh_bus_reset_done:
 896         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 897             (ret == FAILED) ? "failed" : "succeded");
 898
 899         return ret;
 900 }
 901
 902 /**************************************************************************
 903 * qla2xxx_eh_host_reset
 904 *
 905 * Description:
 906 *    The reset function will reset the Adapter.
 907 *
 908 * Input:
 909 *      cmd = Linux SCSI command packet of the command that cause the
 910 *            adapter reset.
 911 *
 912 * Returns:
 913 *      Either SUCCESS or FAILED.
 914 *
 915 * Note:
 916 **************************************************************************/
 917 int
 918 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 919 {
 920         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 921         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 922         srb_t *sp;
 923         int ret;
 924         unsigned int id, lun;
 925         unsigned long serial;
 926
 927         ret = FAILED;
 928
 929         id = cmd->device->id;
 930         lun = cmd->device->lun;
 931         serial = cmd->serial_number;
 932
 933         sp = (srb_t *) CMD_SP(cmd);
 934         if (!sp || !fcport)
 935                 return ret;
 936
 937         qla_printk(KERN_INFO, ha,
 938             "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
 939
 940         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 941                 goto eh_host_reset_lock;
 942
 943         /*
 944          * Fixme-may be dpc thread is active and processing
 945          * loop_resync,so wait a while for it to
 946          * be completed and then issue big hammer.Otherwise
 947          * it may cause I/O failure as big hammer marks the
 948          * devices as lost kicking of the port_down_timer
 949          * while dpc is stuck for the mailbox to complete.
 950          */
 951         qla2x00_wait_for_loop_ready(ha);
 952         set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 953         if (qla2x00_abort_isp(ha)) {
 954                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 955                 /* failed. schedule dpc to try */
 956                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 957
 958                 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 959                         goto eh_host_reset_lock;
 960         }
 961         clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 962
 963         /* Waiting for our command in done_queue to be returned to OS.*/
 964         if (qla2x00_eh_wait_for_pending_commands(ha))
 965                 ret = SUCCESS;
 966
 967 eh_host_reset_lock:
 968         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 969             (ret == FAILED) ? "failed" : "succeded");
 970
 971         return ret;
 972 }
 973
 974 /*
 975 * qla2x00_loop_reset
 976 *      Issue loop reset.
 977 *
 978 * Input:
 979 *      ha = adapter block pointer.
 980 *
 981 * Returns:
 982 *      0 = success
 983 */
 984 static int
 985 qla2x00_loop_reset(scsi_qla_host_t *ha)
 986 {
 987         int status = QLA_SUCCESS;
 988         struct fc_port *fcport;
 989
 990         if (ha->flags.enable_lip_reset) {
 991                 status = qla2x00_lip_reset(ha);
 992         }
 993
 994         if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
 995                 list_for_each_entry(fcport, &ha->fcports, list) {
 996                         if (fcport->port_type != FCT_TARGET)
 997                                 continue;
 998
 999                         status = qla2x00_device_reset(ha, fcport);
1000                         if (status != QLA_SUCCESS)
1001                                 break;
1002                 }
1003         }
1004
1005         if (status == QLA_SUCCESS &&
1006                 ((!ha->flags.enable_target_reset &&
1007                   !ha->flags.enable_lip_reset) ||
1008                 ha->flags.enable_lip_full_login)) {
1009
1010                 status = qla2x00_full_login_lip(ha);
1011         }
1012
1013         /* Issue marker command only when we are going to start the I/O */
1014         ha->marker_needed = 1;
1015
1016         if (status) {
1017                 /* Empty */
1018                 DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
1019                                 __func__,
1020                                 ha->host_no);)
1021         } else {
1022                 /* Empty */
1023                 DEBUG3(printk("%s(%ld): exiting normally.\n",
1024                                 __func__,
1025                                 ha->host_no);)
1026         }
1027
1028         return(status);
1029 }
1030
1031 /*
1032  * qla2x00_device_reset
1033  *      Issue bus device reset message to the target.
1034  *
1035  * Input:
1036  *      ha = adapter block pointer.
1037  *      t = SCSI ID.
1038  *      TARGET_QUEUE_LOCK must be released.
1039  *      ADAPTER_STATE_LOCK must be released.
1040  *
1041  * Context:
1042  *      Kernel context.
1043  */
1044 static int
1045 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1046 {
1047         /* Abort Target command will clear Reservation */
1048         return ha->isp_ops.abort_target(reset_fcport);
1049 }
1050
1051 static int
1052 qla2xxx_slave_alloc(struct scsi_device *sdev)
1053 {
1054         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1055
1056         if (!rport || fc_remote_port_chkready(rport))
1057                 return -ENXIO;
1058
1059         sdev->hostdata = *(fc_port_t **)rport->dd_data;
1060
1061         return 0;
1062 }
1063
1064 static int
1065 qla2xxx_slave_configure(struct scsi_device *sdev)
1066 {
1067         scsi_qla_host_t *ha = to_qla_host(sdev->host);
1068         struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1069
1070         if (sdev->tagged_supported)
1071                 scsi_activate_tcq(sdev, 32);
1072         else
1073                 scsi_deactivate_tcq(sdev, 32);
1074
1075         rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1076
1077         return 0;
1078 }
1079
1080 static void
1081 qla2xxx_slave_destroy(struct scsi_device *sdev)
1082 {
1083         sdev->hostdata = NULL;
1084 }
1085
1086 static int
1087 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1088 {
1089         scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1090         return sdev->queue_depth;
1091 }
1092
1093 static int
1094 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1095 {
1096         if (sdev->tagged_supported) {
1097                 scsi_set_tag_type(sdev, tag_type);
1098                 if (tag_type)
1099                         scsi_activate_tcq(sdev, sdev->queue_depth);
1100                 else
1101                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
1102         } else
1103                 tag_type = 0;
1104
1105         return tag_type;
1106 }
1107
1108 /**
1109  * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1110  * @ha: HA context
1111  *
1112  * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1113  * supported addressing method.
1114  */
1115 static void
1116 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1117 {
1118         /* Assume a 32bit DMA mask. */
1119         ha->flags.enable_64bit_addressing = 0;
1120
1121         if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1122                 /* Any upper-dword bits set? */
1123                 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1124                     !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1125                         /* Ok, a 64bit DMA mask is applicable. */
1126                         ha->flags.enable_64bit_addressing = 1;
1127                         ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1128                         ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1129                         return;
1130                 }
1131         }
1132
1133         dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1134         pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1135 }
1136
1137 static int
1138 qla2x00_iospace_config(scsi_qla_host_t *ha)
1139 {
1140         unsigned long   pio, pio_len, pio_flags;
1141         unsigned long   mmio, mmio_len, mmio_flags;
1142
1143         /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1144         pio = pci_resource_start(ha->pdev, 0);
1145         pio_len = pci_resource_len(ha->pdev, 0);
1146         pio_flags = pci_resource_flags(ha->pdev, 0);
1147         if (pio_flags & IORESOURCE_IO) {
1148                 if (pio_len < MIN_IOBASE_LEN) {
1149                         qla_printk(KERN_WARNING, ha,
1150                             "Invalid PCI I/O region size (%s)...\n",
1151                                 pci_name(ha->pdev));
1152                         pio = 0;
1153                 }
1154         } else {
1155                 qla_printk(KERN_WARNING, ha,
1156                     "region #0 not a PIO resource (%s)...\n",
1157                     pci_name(ha->pdev));
1158                 pio = 0;
1159         }
1160
1161         /* Use MMIO operations for all accesses. */
1162         mmio = pci_resource_start(ha->pdev, 1);
1163         mmio_len = pci_resource_len(ha->pdev, 1);
1164         mmio_flags = pci_resource_flags(ha->pdev, 1);
1165
1166         if (!(mmio_flags & IORESOURCE_MEM)) {
1167                 qla_printk(KERN_ERR, ha,
1168                     "region #0 not an MMIO resource (%s), aborting\n",
1169                     pci_name(ha->pdev));
1170                 goto iospace_error_exit;
1171         }
1172         if (mmio_len < MIN_IOBASE_LEN) {
1173                 qla_printk(KERN_ERR, ha,
1174                     "Invalid PCI mem region size (%s), aborting\n",
1175                         pci_name(ha->pdev));
1176                 goto iospace_error_exit;
1177         }
1178
1179         if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
1180                 qla_printk(KERN_WARNING, ha,
1181                     "Failed to reserve PIO/MMIO regions (%s)\n",
1182                     pci_name(ha->pdev));
1183
1184                 goto iospace_error_exit;
1185         }
1186
1187         ha->pio_address = pio;
1188         ha->pio_length = pio_len;
1189         ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1190         if (!ha->iobase) {
1191                 qla_printk(KERN_ERR, ha,
1192                     "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1193
1194                 goto iospace_error_exit;
1195         }
1196
1197         return (0);
1198
1199 iospace_error_exit:
1200         return (-ENOMEM);
1201 }
1202
1203 static void
1204 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1205 {
1206         unsigned long flags = 0;
1207         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1208
1209         spin_lock_irqsave(&ha->hardware_lock, flags);
1210         ha->interrupts_on = 1;
1211         /* enable risc and host interrupts */
1212         WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
1213         RD_REG_WORD(&reg->ictrl);
1214         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1215
1216 }
1217
1218 static void
1219 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1220 {
1221         unsigned long flags = 0;
1222         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1223
1224         spin_lock_irqsave(&ha->hardware_lock, flags);
1225         ha->interrupts_on = 0;
1226         /* disable risc and host interrupts */
1227         WRT_REG_WORD(&reg->ictrl, 0);
1228         RD_REG_WORD(&reg->ictrl);
1229         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1230 }
1231
1232 static void
1233 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1234 {
1235         unsigned long flags = 0;
1236         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1237
1238         spin_lock_irqsave(&ha->hardware_lock, flags);
1239         ha->interrupts_on = 1;
1240         WRT_REG_DWORD(&reg->ictrl, ICRX_EN_RISC_INT);
1241         RD_REG_DWORD(&reg->ictrl);
1242         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1243 }
1244
1245 static void
1246 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1247 {
1248         unsigned long flags = 0;
1249         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1250
1251         spin_lock_irqsave(&ha->hardware_lock, flags);
1252         ha->interrupts_on = 0;
1253         WRT_REG_DWORD(&reg->ictrl, 0);
1254         RD_REG_DWORD(&reg->ictrl);
1255         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1256 }
1257
1258 /*
1259  * PCI driver interface
1260  */
1261 int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
1262 {
1263         int     ret = -ENODEV;
1264         device_reg_t __iomem *reg;
1265         struct Scsi_Host *host;
1266         scsi_qla_host_t *ha;
1267         unsigned long   flags = 0;
1268         unsigned long   wait_switch = 0;
1269         char pci_info[20];
1270         char fw_str[30];
1271         fc_port_t *fcport;
1272         struct scsi_host_template *sht;
1273
1274         if (pci_enable_device(pdev))
1275                 goto probe_out;
1276
1277         sht = &qla2x00_driver_template;
1278         if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1279             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
1280                 sht = &qla24xx_driver_template;
1281         host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1282         if (host == NULL) {
1283                 printk(KERN_WARNING
1284                     "qla2xxx: Couldn't allocate host from scsi layer!\n");
1285                 goto probe_disable_device;
1286         }
1287
1288         /* Clear our data area */
1289         ha = (scsi_qla_host_t *)host->hostdata;
1290         memset(ha, 0, sizeof(scsi_qla_host_t));
1291
1292         ha->pdev = pdev;
1293         ha->host = host;
1294         ha->host_no = host->host_no;
1295         ha->brd_info = brd_info;
1296         sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
1297
1298         ha->dpc_pid = -1;
1299
1300         /* Configure PCI I/O space */
1301         ret = qla2x00_iospace_config(ha);
1302         if (ret)
1303                 goto probe_failed;
1304
1305         qla_printk(KERN_INFO, ha,
1306             "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1307             ha->iobase);
1308
1309         spin_lock_init(&ha->hardware_lock);
1310
1311         ha->prev_topology = 0;
1312         ha->ports = MAX_BUSES;
1313         ha->init_cb_size = sizeof(init_cb_t);
1314         ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1315
1316         /* Assign ISP specific operations. */
1317         ha->isp_ops.pci_config          = qla2100_pci_config;
1318         ha->isp_ops.reset_chip          = qla2x00_reset_chip;
1319         ha->isp_ops.chip_diag           = qla2x00_chip_diag;
1320         ha->isp_ops.config_rings        = qla2x00_config_rings;
1321         ha->isp_ops.reset_adapter       = qla2x00_reset_adapter;
1322         ha->isp_ops.nvram_config        = qla2x00_nvram_config;
1323         ha->isp_ops.update_fw_options   = qla2x00_update_fw_options;
1324         ha->isp_ops.load_risc           = qla2x00_load_risc;
1325         ha->isp_ops.pci_info_str        = qla2x00_pci_info_str;
1326         ha->isp_ops.fw_version_str      = qla2x00_fw_version_str;
1327         ha->isp_ops.intr_handler        = qla2100_intr_handler;
1328         ha->isp_ops.enable_intrs        = qla2x00_enable_intrs;
1329         ha->isp_ops.disable_intrs       = qla2x00_disable_intrs;
1330         ha->isp_ops.abort_command       = qla2x00_abort_command;
1331         ha->isp_ops.abort_target        = qla2x00_abort_target;
1332         ha->isp_ops.fabric_login        = qla2x00_login_fabric;
1333         ha->isp_ops.fabric_logout       = qla2x00_fabric_logout;
1334         ha->isp_ops.calc_req_entries    = qla2x00_calc_iocbs_32;
1335         ha->isp_ops.build_iocbs         = qla2x00_build_scsi_iocbs_32;
1336         ha->isp_ops.prep_ms_iocb        = qla2x00_prep_ms_iocb;
1337         ha->isp_ops.prep_ms_fdmi_iocb   = qla2x00_prep_ms_fdmi_iocb;
1338         ha->isp_ops.read_nvram          = qla2x00_read_nvram_data;
1339         ha->isp_ops.write_nvram         = qla2x00_write_nvram_data;
1340         ha->isp_ops.fw_dump             = qla2100_fw_dump;
1341         ha->isp_ops.ascii_fw_dump       = qla2100_ascii_fw_dump;
1342         if (IS_QLA2100(ha)) {
1343                 host->max_id = MAX_TARGETS_2100;
1344                 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1345                 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1346                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1347                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1348                 host->sg_tablesize = 32;
1349                 ha->gid_list_info_size = 4;
1350         } else if (IS_QLA2200(ha)) {
1351                 host->max_id = MAX_TARGETS_2200;
1352                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1353                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1354                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1355                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1356                 ha->gid_list_info_size = 4;
1357         } else if (IS_QLA23XX(ha)) {
1358                 host->max_id = MAX_TARGETS_2200;
1359                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1360                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1361                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1362                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1363                 ha->isp_ops.pci_config = qla2300_pci_config;
1364                 ha->isp_ops.intr_handler = qla2300_intr_handler;
1365                 ha->isp_ops.fw_dump = qla2300_fw_dump;
1366                 ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
1367                 ha->gid_list_info_size = 6;
1368         } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1369                 host->max_id = MAX_TARGETS_2200;
1370                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1371                 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1372                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1373                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1374                 ha->init_cb_size = sizeof(struct init_cb_24xx);
1375                 ha->mgmt_svr_loop_id = 10;
1376                 ha->isp_ops.pci_config = qla24xx_pci_config;
1377                 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1378                 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1379                 ha->isp_ops.config_rings = qla24xx_config_rings;
1380                 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1381                 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1382                 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1383                 ha->isp_ops.load_risc = qla24xx_load_risc;
1384 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
1385                 if (ql2xfwloadflash)
1386                         ha->isp_ops.load_risc = qla24xx_load_risc_flash;
1387 #endif
1388                 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1389                 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1390                 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1391                 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1392                 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1393                 ha->isp_ops.abort_command = qla24xx_abort_command;
1394                 ha->isp_ops.abort_target = qla24xx_abort_target;
1395                 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1396                 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1397                 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1398                 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1399                 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1400                 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1401                 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1402                 ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
1403                 ha->gid_list_info_size = 8;
1404         }
1405         host->can_queue = ha->request_q_length + 128;
1406
1407         /* load the F/W, read paramaters, and init the H/W */
1408         ha->instance = num_hosts;
1409
1410         init_MUTEX(&ha->mbx_cmd_sem);
1411         init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1412
1413         INIT_LIST_HEAD(&ha->list);
1414         INIT_LIST_HEAD(&ha->fcports);
1415         INIT_LIST_HEAD(&ha->rscn_fcports);
1416
1417         /*
1418          * These locks are used to prevent more than one CPU
1419          * from modifying the queue at the same time. The
1420          * higher level "host_lock" will reduce most
1421          * contention for these locks.
1422          */
1423         spin_lock_init(&ha->mbx_reg_lock);
1424
1425         init_completion(&ha->dpc_inited);
1426         init_completion(&ha->dpc_exited);
1427
1428         qla2x00_config_dma_addressing(ha);
1429         if (qla2x00_mem_alloc(ha)) {
1430                 qla_printk(KERN_WARNING, ha,
1431                     "[ERROR] Failed to allocate memory for adapter\n");
1432
1433                 ret = -ENOMEM;
1434                 goto probe_failed;
1435         }
1436
1437         if (qla2x00_initialize_adapter(ha) &&
1438             !(ha->device_flags & DFLG_NO_CABLE)) {
1439
1440                 qla_printk(KERN_WARNING, ha,
1441                     "Failed to initialize adapter\n");
1442
1443                 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1444                     "Adapter flags %x.\n",
1445                     ha->host_no, ha->device_flags));
1446
1447                 ret = -ENODEV;
1448                 goto probe_failed;
1449         }
1450
1451         /*
1452          * Startup the kernel thread for this host adapter
1453          */
1454         ha->dpc_should_die = 0;
1455         ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0);
1456         if (ha->dpc_pid < 0) {
1457                 qla_printk(KERN_WARNING, ha,
1458                     "Unable to start DPC thread!\n");
1459
1460                 ret = -ENODEV;
1461                 goto probe_failed;
1462         }
1463         wait_for_completion(&ha->dpc_inited);
1464
1465         host->this_id = 255;
1466         host->cmd_per_lun = 3;
1467         host->unique_id = ha->instance;
1468         host->max_cmd_len = MAX_CMDSZ;
1469         host->max_channel = ha->ports - 1;
1470         host->max_lun = MAX_LUNS;
1471         host->transportt = qla2xxx_transport_template;
1472
1473         ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
1474             SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
1475         if (ret) {
1476                 qla_printk(KERN_WARNING, ha,
1477                     "Failed to reserve interrupt %d already in use.\n",
1478                     pdev->irq);
1479                 goto probe_failed;
1480         }
1481         host->irq = pdev->irq;
1482
1483         /* Initialized the timer */
1484         qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1485
1486         DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1487             ha->host_no, ha));
1488
1489         ha->isp_ops.disable_intrs(ha);
1490
1491         spin_lock_irqsave(&ha->hardware_lock, flags);
1492         reg = ha->iobase;
1493         if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1494                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_HOST_INT);
1495                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_RISC_INT);
1496         } else {
1497                 WRT_REG_WORD(&reg->isp.semaphore, 0);
1498                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_RISC_INT);
1499                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_HOST_INT);
1500
1501                 /* Enable proper parity */
1502                 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1503                         if (IS_QLA2300(ha))
1504                                 /* SRAM parity */
1505                                 WRT_REG_WORD(&reg->isp.hccr,
1506                                     (HCCR_ENABLE_PARITY + 0x1));
1507                         else
1508                                 /* SRAM, Instruction RAM and GP RAM parity */
1509                                 WRT_REG_WORD(&reg->isp.hccr,
1510                                     (HCCR_ENABLE_PARITY + 0x7));
1511                 }
1512         }
1513         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1514
1515         ha->isp_ops.enable_intrs(ha);
1516
1517         /* v2.19.5b6 */
1518         /*
1519          * Wait around max loop_reset_delay secs for the devices to come
1520          * on-line. We don't want Linux scanning before we are ready.
1521          *
1522          */
1523         for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
1524             time_before(jiffies,wait_switch) &&
1525              !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
1526              && (ha->device_flags & SWITCH_FOUND) ;) {
1527
1528                 qla2x00_check_fabric_devices(ha);
1529
1530                 msleep(10);
1531         }
1532
1533         pci_set_drvdata(pdev, ha);
1534         ha->flags.init_done = 1;
1535         num_hosts++;
1536
1537         ret = scsi_add_host(host, &pdev->dev);
1538         if (ret)
1539                 goto probe_failed;
1540
1541         qla2x00_alloc_sysfs_attr(ha);
1542
1543         qla2x00_init_host_attr(ha);
1544
1545         qla_printk(KERN_INFO, ha, "\n"
1546             " QLogic Fibre Channel HBA Driver: %s\n"
1547             "  QLogic %s - %s\n"
1548             "  ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1549             qla2x00_version_str, ha->model_number,
1550             ha->model_desc ? ha->model_desc: "", pdev->device,
1551             ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1552             ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1553             ha->isp_ops.fw_version_str(ha, fw_str));
1554
1555         /* Go with fc_rport registration. */
1556         list_for_each_entry(fcport, &ha->fcports, list)
1557                 qla2x00_reg_remote_port(ha, fcport);
1558
1559         return 0;
1560
1561 probe_failed:
1562         qla2x00_free_device(ha);
1563
1564         scsi_host_put(host);
1565
1566 probe_disable_device:
1567         pci_disable_device(pdev);
1568
1569 probe_out:
1570         return ret;
1571 }
1572 EXPORT_SYMBOL_GPL(qla2x00_probe_one);
1573
1574 void qla2x00_remove_one(struct pci_dev *pdev)
1575 {
1576         scsi_qla_host_t *ha;
1577
1578         ha = pci_get_drvdata(pdev);
1579
1580         qla2x00_free_sysfs_attr(ha);
1581
1582         fc_remove_host(ha->host);
1583
1584         scsi_remove_host(ha->host);
1585
1586         qla2x00_free_device(ha);
1587
1588         scsi_host_put(ha->host);
1589
1590         pci_set_drvdata(pdev, NULL);
1591 }
1592 EXPORT_SYMBOL_GPL(qla2x00_remove_one);
1593
1594 static void
1595 qla2x00_free_device(scsi_qla_host_t *ha)
1596 {
1597         int ret;
1598
1599         /* Abort any outstanding IO descriptors. */
1600         if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
1601                 qla2x00_cancel_io_descriptors(ha);
1602
1603         /* Disable timer */
1604         if (ha->timer_active)
1605                 qla2x00_stop_timer(ha);
1606
1607         /* Kill the kernel thread for this host */
1608         if (ha->dpc_pid >= 0) {
1609                 ha->dpc_should_die = 1;
1610                 wmb();
1611                 ret = kill_proc(ha->dpc_pid, SIGHUP, 1);
1612                 if (ret) {
1613                         qla_printk(KERN_ERR, ha,
1614                             "Unable to signal DPC thread -- (%d)\n", ret);
1615
1616                         /* TODO: SOMETHING MORE??? */
1617                 } else {
1618                         wait_for_completion(&ha->dpc_exited);
1619                 }
1620         }
1621
1622         /* Stop currently executing firmware. */
1623         qla2x00_stop_firmware(ha);
1624
1625         /* turn-off interrupts on the card */
1626         if (ha->interrupts_on)
1627                 ha->isp_ops.disable_intrs(ha);
1628
1629         qla2x00_mem_free(ha);
1630
1631         ha->flags.online = 0;
1632
1633         /* Detach interrupts */
1634         if (ha->pdev->irq)
1635                 free_irq(ha->pdev->irq, ha);
1636
1637         /* release io space registers  */
1638         if (ha->iobase)
1639                 iounmap(ha->iobase);
1640         pci_release_regions(ha->pdev);
1641
1642         pci_disable_device(ha->pdev);
1643 }
1644
1645 static inline void
1646 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1647     int defer)
1648 {
1649         unsigned long flags;
1650         struct fc_rport *rport;
1651
1652         if (!fcport->rport)
1653                 return;
1654
1655         rport = fcport->rport;
1656         if (defer) {
1657                 spin_lock_irqsave(&fcport->rport_lock, flags);
1658                 fcport->drport = rport;
1659                 fcport->rport = NULL;
1660                 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1661                 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1662         } else {
1663                 spin_lock_irqsave(&fcport->rport_lock, flags);
1664                 fcport->rport = NULL;
1665                 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1666                 fc_remote_port_delete(rport);
1667         }
1668 }
1669
1670 /*
1671  * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1672  *
1673  * Input: ha = adapter block pointer.  fcport = port structure pointer.
1674  *
1675  * Return: None.
1676  *
1677  * Context:
1678  */
1679 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1680     int do_login, int defer)
1681 {
1682         if (atomic_read(&fcport->state) == FCS_ONLINE)
1683                 qla2x00_schedule_rport_del(ha, fcport, defer);
1684
1685         /*
1686          * We may need to retry the login, so don't change the state of the
1687          * port but do the retries.
1688          */
1689         if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1690                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1691
1692         if (!do_login)
1693                 return;
1694
1695         if (fcport->login_retry == 0) {
1696                 fcport->login_retry = ha->login_retry_count;
1697                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1698
1699                 DEBUG(printk("scsi(%ld): Port login retry: "
1700                     "%02x%02x%02x%02x%02x%02x%02x%02x, "
1701                     "id = 0x%04x retry cnt=%d\n",
1702                     ha->host_no,
1703                     fcport->port_name[0],
1704                     fcport->port_name[1],
1705                     fcport->port_name[2],
1706                     fcport->port_name[3],
1707                     fcport->port_name[4],
1708                     fcport->port_name[5],
1709                     fcport->port_name[6],
1710                     fcport->port_name[7],
1711                     fcport->loop_id,
1712                     fcport->login_retry));
1713         }
1714 }
1715
1716 /*
1717  * qla2x00_mark_all_devices_lost
1718  *      Updates fcport state when device goes offline.
1719  *
1720  * Input:
1721  *      ha = adapter block pointer.
1722  *      fcport = port structure pointer.
1723  *
1724  * Return:
1725  *      None.
1726  *
1727  * Context:
1728  */
1729 void
1730 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1731 {
1732         fc_port_t *fcport;
1733
1734         list_for_each_entry(fcport, &ha->fcports, list) {
1735                 if (fcport->port_type != FCT_TARGET)
1736                         continue;
1737
1738                 /*
1739                  * No point in marking the device as lost, if the device is
1740                  * already DEAD.
1741                  */
1742                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1743                         continue;
1744                 if (atomic_read(&fcport->state) == FCS_ONLINE)
1745                         qla2x00_schedule_rport_del(ha, fcport, defer);
1746                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1747         }
1748
1749         if (defer && ha->dpc_wait && !ha->dpc_active)
1750                 up(ha->dpc_wait);
1751 }
1752
1753 /*
1754 * qla2x00_mem_alloc
1755 *      Allocates adapter memory.
1756 *
1757 * Returns:
1758 *      0  = success.
1759 *      1  = failure.
1760 */
1761 static uint8_t
1762 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1763 {
1764         char    name[16];
1765         uint8_t   status = 1;
1766         int     retry= 10;
1767
1768         do {
1769                 /*
1770                  * This will loop only once if everything goes well, else some
1771                  * number of retries will be performed to get around a kernel
1772                  * bug where available mem is not allocated until after a
1773                  * little delay and a retry.
1774                  */
1775                 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1776                     (ha->request_q_length + 1) * sizeof(request_t),
1777                     &ha->request_dma, GFP_KERNEL);
1778                 if (ha->request_ring == NULL) {
1779                         qla_printk(KERN_WARNING, ha,
1780                             "Memory Allocation failed - request_ring\n");
1781
1782                         qla2x00_mem_free(ha);
1783                         msleep(100);
1784
1785                         continue;
1786                 }
1787
1788                 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1789                     (ha->response_q_length + 1) * sizeof(response_t),
1790                     &ha->response_dma, GFP_KERNEL);
1791                 if (ha->response_ring == NULL) {
1792                         qla_printk(KERN_WARNING, ha,
1793                             "Memory Allocation failed - response_ring\n");
1794
1795                         qla2x00_mem_free(ha);
1796                         msleep(100);
1797
1798                         continue;
1799                 }
1800
1801                 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1802                     &ha->gid_list_dma, GFP_KERNEL);
1803                 if (ha->gid_list == NULL) {
1804                         qla_printk(KERN_WARNING, ha,
1805                             "Memory Allocation failed - gid_list\n");
1806
1807                         qla2x00_mem_free(ha);
1808                         msleep(100);
1809
1810                         continue;
1811                 }
1812
1813                 ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev,
1814                     sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL);
1815                 if (ha->rlc_rsp == NULL) {
1816                         qla_printk(KERN_WARNING, ha,
1817                                 "Memory Allocation failed - rlc");
1818
1819                         qla2x00_mem_free(ha);
1820                         msleep(100);
1821
1822                         continue;
1823                 }
1824
1825                 snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no);
1826                 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1827                     DMA_POOL_SIZE, 8, 0);
1828                 if (ha->s_dma_pool == NULL) {
1829                         qla_printk(KERN_WARNING, ha,
1830                             "Memory Allocation failed - s_dma_pool\n");
1831
1832                         qla2x00_mem_free(ha);
1833                         msleep(100);
1834
1835                         continue;
1836                 }
1837
1838                 /* get consistent memory allocated for init control block */
1839                 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1840                     &ha->init_cb_dma);
1841                 if (ha->init_cb == NULL) {
1842                         qla_printk(KERN_WARNING, ha,
1843                             "Memory Allocation failed - init_cb\n");
1844
1845                         qla2x00_mem_free(ha);
1846                         msleep(100);
1847
1848                         continue;
1849                 }
1850                 memset(ha->init_cb, 0, ha->init_cb_size);
1851
1852                 /* Get consistent memory allocated for Get Port Database cmd */
1853                 ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1854                     &ha->iodesc_pd_dma);
1855                 if (ha->iodesc_pd == NULL) {
1856                         /* error */
1857                         qla_printk(KERN_WARNING, ha,
1858                             "Memory Allocation failed - iodesc_pd\n");
1859
1860                         qla2x00_mem_free(ha);
1861                         msleep(100);
1862
1863                         continue;
1864                 }
1865                 memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE);
1866
1867                 /* Allocate ioctl related memory. */
1868                 if (qla2x00_alloc_ioctl_mem(ha)) {
1869                         qla_printk(KERN_WARNING, ha,
1870                             "Memory Allocation failed - ioctl_mem\n");
1871
1872                         qla2x00_mem_free(ha);
1873                         msleep(100);
1874
1875                         continue;
1876                 }
1877
1878                 if (qla2x00_allocate_sp_pool(ha)) {
1879                         qla_printk(KERN_WARNING, ha,
1880                             "Memory Allocation failed - "
1881                             "qla2x00_allocate_sp_pool()\n");
1882
1883                         qla2x00_mem_free(ha);
1884                         msleep(100);
1885
1886                         continue;
1887                 }
1888
1889                 /* Allocate memory for SNS commands */
1890                 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1891                         /* Get consistent memory allocated for SNS commands */
1892                         ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1893                             sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1894                             GFP_KERNEL);
1895                         if (ha->sns_cmd == NULL) {
1896                                 /* error */
1897                                 qla_printk(KERN_WARNING, ha,
1898                                     "Memory Allocation failed - sns_cmd\n");
1899
1900                                 qla2x00_mem_free(ha);
1901                                 msleep(100);
1902
1903                                 continue;
1904                         }
1905                         memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1906                 } else {
1907                         /* Get consistent memory allocated for MS IOCB */
1908                         ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1909                             &ha->ms_iocb_dma);
1910                         if (ha->ms_iocb == NULL) {
1911                                 /* error */
1912                                 qla_printk(KERN_WARNING, ha,
1913                                     "Memory Allocation failed - ms_iocb\n");
1914
1915                                 qla2x00_mem_free(ha);
1916                                 msleep(100);
1917
1918                                 continue;
1919                         }
1920                         memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
1921
1922                         /*
1923                          * Get consistent memory allocated for CT SNS
1924                          * commands
1925                          */
1926                         ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
1927                             sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
1928                             GFP_KERNEL);
1929                         if (ha->ct_sns == NULL) {
1930                                 /* error */
1931                                 qla_printk(KERN_WARNING, ha,
1932                                     "Memory Allocation failed - ct_sns\n");
1933
1934                                 qla2x00_mem_free(ha);
1935                                 msleep(100);
1936
1937                                 continue;
1938                         }
1939                         memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
1940                 }
1941
1942                 /* Done all allocations without any error. */
1943                 status = 0;
1944
1945         } while (retry-- && status != 0);
1946
1947         if (status) {
1948                 printk(KERN_WARNING
1949                         "%s(): **** FAILED ****\n", __func__);
1950         }
1951
1952         return(status);
1953 }
1954
1955 /*
1956 * qla2x00_mem_free
1957 *      Frees all adapter allocated memory.
1958 *
1959 * Input:
1960 *      ha = adapter block pointer.
1961 */
1962 static void
1963 qla2x00_mem_free(scsi_qla_host_t *ha)
1964 {
1965         struct list_head        *fcpl, *fcptemp;
1966         fc_port_t       *fcport;
1967         unsigned int    wtime;/* max wait time if mbx cmd is busy. */
1968
1969         if (ha == NULL) {
1970                 /* error */
1971                 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
1972                 return;
1973         }
1974
1975         /* Make sure all other threads are stopped. */
1976         wtime = 60 * 1000;
1977         while (ha->dpc_wait && wtime)
1978                 wtime = msleep_interruptible(wtime);
1979
1980         /* free ioctl memory */
1981         qla2x00_free_ioctl_mem(ha);
1982
1983         /* free sp pool */
1984         qla2x00_free_sp_pool(ha);
1985
1986         if (ha->sns_cmd)
1987                 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
1988                     ha->sns_cmd, ha->sns_cmd_dma);
1989
1990         if (ha->ct_sns)
1991                 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
1992                     ha->ct_sns, ha->ct_sns_dma);
1993
1994         if (ha->ms_iocb)
1995                 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
1996
1997         if (ha->iodesc_pd)
1998                 dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma);
1999
2000         if (ha->init_cb)
2001                 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
2002
2003         if (ha->s_dma_pool)
2004                 dma_pool_destroy(ha->s_dma_pool);
2005
2006         if (ha->rlc_rsp)
2007                 dma_free_coherent(&ha->pdev->dev,
2008                     sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp,
2009                     ha->rlc_rsp_dma);
2010
2011         if (ha->gid_list)
2012                 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2013                     ha->gid_list_dma);
2014
2015         if (ha->response_ring)
2016                 dma_free_coherent(&ha->pdev->dev,
2017                     (ha->response_q_length + 1) * sizeof(response_t),
2018                     ha->response_ring, ha->response_dma);
2019
2020         if (ha->request_ring)
2021                 dma_free_coherent(&ha->pdev->dev,
2022                     (ha->request_q_length + 1) * sizeof(request_t),
2023                     ha->request_ring, ha->request_dma);
2024
2025         ha->sns_cmd = NULL;
2026         ha->sns_cmd_dma = 0;
2027         ha->ct_sns = NULL;
2028         ha->ct_sns_dma = 0;
2029         ha->ms_iocb = NULL;
2030         ha->ms_iocb_dma = 0;
2031         ha->iodesc_pd = NULL;
2032         ha->iodesc_pd_dma = 0;
2033         ha->init_cb = NULL;
2034         ha->init_cb_dma = 0;
2035
2036         ha->s_dma_pool = NULL;
2037
2038         ha->rlc_rsp = NULL;
2039         ha->rlc_rsp_dma = 0;
2040         ha->gid_list = NULL;
2041         ha->gid_list_dma = 0;
2042
2043         ha->response_ring = NULL;
2044         ha->response_dma = 0;
2045         ha->request_ring = NULL;
2046         ha->request_dma = 0;
2047
2048         list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2049                 fcport = list_entry(fcpl, fc_port_t, list);
2050
2051                 /* fc ports */
2052                 list_del_init(&fcport->list);
2053                 kfree(fcport);
2054         }
2055         INIT_LIST_HEAD(&ha->fcports);
2056
2057         if (ha->fw_dump)
2058                 free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order);
2059
2060         vfree(ha->fw_dump24);
2061
2062         vfree(ha->fw_dump_buffer);
2063
2064         ha->fw_dump = NULL;
2065         ha->fw_dump24 = NULL;
2066         ha->fw_dumped = 0;
2067         ha->fw_dump_reading = 0;
2068         ha->fw_dump_buffer = NULL;
2069 }
2070
2071 /*
2072  * qla2x00_allocate_sp_pool
2073  *       This routine is called during initialization to allocate
2074  *       memory for local srb_t.
2075  *
2076  * Input:
2077  *       ha   = adapter block pointer.
2078  *
2079  * Context:
2080  *      Kernel context.
2081  *
2082  * Note: Sets the ref_count for non Null sp to one.
2083  */
2084 static int
2085 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2086 {
2087         int      rval;
2088
2089         rval = QLA_SUCCESS;
2090         ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
2091             mempool_free_slab, srb_cachep);
2092         if (ha->srb_mempool == NULL) {
2093                 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2094                 rval = QLA_FUNCTION_FAILED;
2095         }
2096         return (rval);
2097 }
2098
2099 /*
2100  *  This routine frees all adapter allocated memory.
2101  *
2102  */
2103 static void
2104 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2105 {
2106         if (ha->srb_mempool) {
2107                 mempool_destroy(ha->srb_mempool);
2108                 ha->srb_mempool = NULL;
2109         }
2110 }
2111
2112 /**************************************************************************
2113 * qla2x00_do_dpc
2114 *   This kernel thread is a task that is schedule by the interrupt handler
2115 *   to perform the background processing for interrupts.
2116 *
2117 * Notes:
2118 * This task always run in the context of a kernel thread.  It
2119 * is kick-off by the driver's detect code and starts up
2120 * up one per adapter. It immediately goes to sleep and waits for
2121 * some fibre event.  When either the interrupt handler or
2122 * the timer routine detects a event it will one of the task
2123 * bits then wake us up.
2124 **************************************************************************/
2125 static int
2126 qla2x00_do_dpc(void *data)
2127 {
2128         DECLARE_MUTEX_LOCKED(sem);
2129         scsi_qla_host_t *ha;
2130         fc_port_t       *fcport;
2131         uint8_t         status;
2132         uint16_t        next_loopid;
2133
2134         ha = (scsi_qla_host_t *)data;
2135
2136         lock_kernel();
2137
2138         daemonize("%s_dpc", ha->host_str);
2139         allow_signal(SIGHUP);
2140
2141         ha->dpc_wait = &sem;
2142
2143         set_user_nice(current, -20);
2144
2145         unlock_kernel();
2146
2147         complete(&ha->dpc_inited);
2148
2149         while (1) {
2150                 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2151
2152                 if (down_interruptible(&sem))
2153                         break;
2154
2155                 if (ha->dpc_should_die)
2156                         break;
2157
2158                 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2159
2160                 /* Initialization not yet finished. Don't do anything yet. */
2161                 if (!ha->flags.init_done || ha->dpc_active)
2162                         continue;
2163
2164                 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2165
2166                 ha->dpc_active = 1;
2167
2168                 if (ha->flags.mbox_busy) {
2169                         ha->dpc_active = 0;
2170                         continue;
2171                 }
2172
2173                 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2174
2175                         DEBUG(printk("scsi(%ld): dpc: sched "
2176                             "qla2x00_abort_isp ha = %p\n",
2177                             ha->host_no, ha));
2178                         if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2179                             &ha->dpc_flags))) {
2180
2181                                 if (qla2x00_abort_isp(ha)) {
2182                                         /* failed. retry later */
2183                                         set_bit(ISP_ABORT_NEEDED,
2184                                             &ha->dpc_flags);
2185                                 }
2186                                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2187                         }
2188                         DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2189                             ha->host_no));
2190                 }
2191
2192                 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2193                         qla2x00_update_fcports(ha);
2194
2195                 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2196                         DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2197                             ha->host_no));
2198                         qla2x00_loop_reset(ha);
2199                 }
2200
2201                 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2202                     (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2203
2204                         DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2205                             ha->host_no));
2206
2207                         qla2x00_rst_aen(ha);
2208                         clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2209                 }
2210
2211                 /* Retry each device up to login retry count */
2212                 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2213                     !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2214                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2215
2216                         DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2217                             ha->host_no));
2218
2219                         next_loopid = 0;
2220                         list_for_each_entry(fcport, &ha->fcports, list) {
2221                                 if (fcport->port_type != FCT_TARGET)
2222                                         continue;
2223
2224                                 /*
2225                                  * If the port is not ONLINE then try to login
2226                                  * to it if we haven't run out of retries.
2227                                  */
2228                                 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2229                                     fcport->login_retry) {
2230
2231                                         fcport->login_retry--;
2232                                         if (fcport->flags & FCF_FABRIC_DEVICE) {
2233                                                 if (fcport->flags &
2234                                                     FCF_TAPE_PRESENT)
2235                                                         ha->isp_ops.fabric_logout(
2236                                                             ha, fcport->loop_id,
2237                                                             fcport->d_id.b.domain,
2238                                                             fcport->d_id.b.area,
2239                                                             fcport->d_id.b.al_pa);
2240                                                 status = qla2x00_fabric_login(
2241                                                     ha, fcport, &next_loopid);
2242                                         } else
2243                                                 status =
2244                                                     qla2x00_local_device_login(
2245                                                         ha, fcport->loop_id);
2246
2247                                         if (status == QLA_SUCCESS) {
2248                                                 fcport->old_loop_id = fcport->loop_id;
2249
2250                                                 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2251                                                     ha->host_no, fcport->loop_id));
2252
2253                                                 qla2x00_update_fcport(ha,
2254                                                     fcport);
2255                                         } else if (status == 1) {
2256                                                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2257                                                 /* retry the login again */
2258                                                 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2259                                                     ha->host_no,
2260                                                     fcport->login_retry, fcport->loop_id));
2261                                         } else {
2262                                                 fcport->login_retry = 0;
2263                                         }
2264                                 }
2265                                 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2266                                         break;
2267                         }
2268                         DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2269                             ha->host_no));
2270                 }
2271
2272                 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2273                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2274
2275                         clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2276                         DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2277                             ha->host_no));
2278
2279                         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2280
2281                         DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2282                             ha->host_no));
2283                 }
2284
2285                 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2286
2287                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2288                             ha->host_no));
2289
2290                         if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2291                             &ha->dpc_flags))) {
2292
2293                                 qla2x00_loop_resync(ha);
2294
2295                                 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2296                         }
2297
2298                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2299                             ha->host_no));
2300                 }
2301
2302                 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2303
2304                         DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2305                             ha->host_no));
2306
2307                         qla2x00_rescan_fcports(ha);
2308
2309                         DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2310                             "end.\n",
2311                             ha->host_no));
2312                 }
2313
2314                 if (!ha->interrupts_on)
2315                         ha->isp_ops.enable_intrs(ha);
2316
2317                 ha->dpc_active = 0;
2318         } /* End of while(1) */
2319
2320         DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2321
2322         /*
2323          * Make sure that nobody tries to wake us up again.
2324          */
2325         ha->dpc_wait = NULL;
2326         ha->dpc_active = 0;
2327
2328         complete_and_exit(&ha->dpc_exited, 0);
2329 }
2330
2331 /*
2332 *  qla2x00_rst_aen
2333 *      Processes asynchronous reset.
2334 *
2335 * Input:
2336 *      ha  = adapter block pointer.
2337 */
2338 static void
2339 qla2x00_rst_aen(scsi_qla_host_t *ha)
2340 {
2341         if (ha->flags.online && !ha->flags.reset_active &&
2342             !atomic_read(&ha->loop_down_timer) &&
2343             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2344                 do {
2345                         clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2346
2347                         /*
2348                          * Issue marker command only when we are going to start
2349                          * the I/O.
2350                          */
2351                         ha->marker_needed = 1;
2352                 } while (!atomic_read(&ha->loop_down_timer) &&
2353                     (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2354         }
2355 }
2356
2357 static void
2358 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2359 {
2360         struct scsi_cmnd *cmd = sp->cmd;
2361
2362         if (sp->flags & SRB_DMA_VALID) {
2363                 if (cmd->use_sg) {
2364                         dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2365                             cmd->use_sg, cmd->sc_data_direction);
2366                 } else if (cmd->request_bufflen) {
2367                         dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2368                             cmd->request_bufflen, cmd->sc_data_direction);
2369                 }
2370                 sp->flags &= ~SRB_DMA_VALID;
2371         }
2372         CMD_SP(cmd) = NULL;
2373 }
2374
2375 void
2376 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2377 {
2378         struct scsi_cmnd *cmd = sp->cmd;
2379
2380         qla2x00_sp_free_dma(ha, sp);
2381
2382         mempool_free(sp, ha->srb_mempool);
2383
2384         cmd->scsi_done(cmd);
2385 }
2386
2387 /**************************************************************************
2388 *   qla2x00_timer
2389 *
2390 * Description:
2391 *   One second timer
2392 *
2393 * Context: Interrupt
2394 ***************************************************************************/
2395 static void
2396 qla2x00_timer(scsi_qla_host_t *ha)
2397 {
2398         unsigned long   cpu_flags = 0;
2399         fc_port_t       *fcport;
2400         int             start_dpc = 0;
2401         int             index;
2402         srb_t           *sp;
2403         int             t;
2404
2405         /*
2406          * Ports - Port down timer.
2407          *
2408          * Whenever, a port is in the LOST state we start decrementing its port
2409          * down timer every second until it reaches zero. Once  it reaches zero
2410          * the port it marked DEAD.
2411          */
2412         t = 0;
2413         list_for_each_entry(fcport, &ha->fcports, list) {
2414                 if (fcport->port_type != FCT_TARGET)
2415                         continue;
2416
2417                 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2418
2419                         if (atomic_read(&fcport->port_down_timer) == 0)
2420                                 continue;
2421
2422                         if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2423                                 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2424
2425                         DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2426                             "%d remaining\n",
2427                             ha->host_no,
2428                             t, atomic_read(&fcport->port_down_timer)));
2429                 }
2430                 t++;
2431         } /* End of for fcport  */
2432
2433
2434         /* Loop down handler. */
2435         if (atomic_read(&ha->loop_down_timer) > 0 &&
2436             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2437
2438                 if (atomic_read(&ha->loop_down_timer) ==
2439                     ha->loop_down_abort_time) {
2440
2441                         DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2442                             "queues before time expire\n",
2443                             ha->host_no));
2444
2445                         if (!IS_QLA2100(ha) && ha->link_down_timeout)
2446                                 atomic_set(&ha->loop_state, LOOP_DEAD);
2447
2448                         /* Schedule an ISP abort to return any tape commands. */
2449                         spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2450                         for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2451                             index++) {
2452                                 fc_port_t *sfcp;
2453
2454                                 sp = ha->outstanding_cmds[index];
2455                                 if (!sp)
2456                                         continue;
2457                                 sfcp = sp->fcport;
2458                                 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2459                                         continue;
2460
2461                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2462                                 break;
2463                         }
2464                         spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2465
2466                         set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2467                         start_dpc++;
2468                 }
2469
2470                 /* if the loop has been down for 4 minutes, reinit adapter */
2471                 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2472                         DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2473                             "restarting queues.\n",
2474                             ha->host_no));
2475
2476                         set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2477                         start_dpc++;
2478
2479                         if (!(ha->device_flags & DFLG_NO_CABLE)) {
2480                                 DEBUG(printk("scsi(%ld): Loop down - "
2481                                     "aborting ISP.\n",
2482                                     ha->host_no));
2483                                 qla_printk(KERN_WARNING, ha,
2484                                     "Loop down - aborting ISP.\n");
2485
2486                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2487                         }
2488                 }
2489                 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2490                     ha->host_no,
2491                     atomic_read(&ha->loop_down_timer)));
2492         }
2493
2494         /* Schedule the DPC routine if needed */
2495         if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2496             test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2497             test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2498             test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2499             start_dpc ||
2500             test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2501             test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2502             test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2503             ha->dpc_wait && !ha->dpc_active) {
2504
2505                 up(ha->dpc_wait);
2506         }
2507
2508         qla2x00_restart_timer(ha, WATCH_INTERVAL);
2509 }
2510
2511 /* XXX(hch): crude hack to emulate a down_timeout() */
2512 int
2513 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2514 {
2515         const unsigned int step = 100; /* msecs */
2516         unsigned int iterations = jiffies_to_msecs(timeout)/100;
2517
2518         do {
2519                 if (!down_trylock(sema))
2520                         return 0;
2521                 if (msleep_interruptible(step))
2522                         break;
2523         } while (--iterations >= 0);
2524
2525         return -ETIMEDOUT;
2526 }
2527
2528 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2529
2530 #define qla2x00_release_firmware()      do { } while (0)
2531 #define qla2x00_pci_module_init()       (0)
2532 #define qla2x00_pci_module_exit()       do { } while (0)
2533
2534 #else   /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
2535
2536 /* Firmware interface routines. */
2537
2538 #define FW_BLOBS        6
2539 #define FW_ISP21XX      0
2540 #define FW_ISP22XX      1
2541 #define FW_ISP2300      2
2542 #define FW_ISP2322      3
2543 #define FW_ISP63XX      4
2544 #define FW_ISP24XX      5
2545
2546 static DECLARE_MUTEX(qla_fw_lock);
2547
2548 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2549         { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
2550         { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
2551         { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
2552         { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2553         { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
2554         { .name = "ql2400_fw.bin", },
2555 };
2556
2557 struct fw_blob *
2558 qla2x00_request_firmware(scsi_qla_host_t *ha)
2559 {
2560         struct fw_blob *blob;
2561
2562         blob = NULL;
2563         if (IS_QLA2100(ha)) {
2564                 blob = &qla_fw_blobs[FW_ISP21XX];
2565         } else if (IS_QLA2200(ha)) {
2566                 blob = &qla_fw_blobs[FW_ISP22XX];
2567         } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
2568                 blob = &qla_fw_blobs[FW_ISP2300];
2569         } else if (IS_QLA2322(ha)) {
2570                 blob = &qla_fw_blobs[FW_ISP2322];
2571         } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
2572                 blob = &qla_fw_blobs[FW_ISP63XX];
2573         } else if (IS_QLA24XX(ha)) {
2574                 blob = &qla_fw_blobs[FW_ISP24XX];
2575         }
2576
2577         down(&qla_fw_lock);
2578         if (blob->fw)
2579                 goto out;
2580
2581         if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2582                 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2583                     "(%s).\n", ha->host_no, blob->name));
2584                 blob->fw = NULL;
2585                 blob = NULL;
2586                 goto out;
2587         }
2588
2589 out:
2590         up(&qla_fw_lock);
2591         return blob;
2592 }
2593
2594 static void
2595 qla2x00_release_firmware(void)
2596 {
2597         int idx;
2598
2599         down(&qla_fw_lock);
2600         for (idx = 0; idx < FW_BLOBS; idx++)
2601                 if (qla_fw_blobs[idx].fw)
2602                         release_firmware(qla_fw_blobs[idx].fw);
2603         up(&qla_fw_lock);
2604 }
2605
2606 static struct qla_board_info qla_board_tbl = {
2607         .drv_name       = "qla2xxx",
2608 };
2609
2610 static struct pci_device_id qla2xxx_pci_tbl[] = {
2611         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
2612                 PCI_ANY_ID, PCI_ANY_ID, },
2613         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
2614                 PCI_ANY_ID, PCI_ANY_ID, },
2615         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300,
2616                 PCI_ANY_ID, PCI_ANY_ID, },
2617         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312,
2618                 PCI_ANY_ID, PCI_ANY_ID, },
2619         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322,
2620                 PCI_ANY_ID, PCI_ANY_ID, },
2621         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312,
2622                 PCI_ANY_ID, PCI_ANY_ID, },
2623         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322,
2624                 PCI_ANY_ID, PCI_ANY_ID, },
2625         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422,
2626                 PCI_ANY_ID, PCI_ANY_ID, },
2627         { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432,
2628                 PCI_ANY_ID, PCI_ANY_ID, },
2629         { 0 },
2630 };
2631 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2632
2633 static int __devinit
2634 qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
2635 {
2636         return qla2x00_probe_one(pdev, &qla_board_tbl);
2637 }
2638
2639 static void __devexit
2640 qla2xxx_remove_one(struct pci_dev *pdev)
2641 {
2642         qla2x00_remove_one(pdev);
2643 }
2644
2645 static struct pci_driver qla2xxx_pci_driver = {
2646         .name           = "qla2xxx",
2647         .driver         = {
2648                 .owner          = THIS_MODULE,
2649         },
2650         .id_table       = qla2xxx_pci_tbl,
2651         .probe          = qla2xxx_probe_one,
2652         .remove         = __devexit_p(qla2xxx_remove_one),
2653 };
2654
2655 static inline int
2656 qla2x00_pci_module_init(void)
2657 {
2658         return pci_module_init(&qla2xxx_pci_driver);
2659 }
2660
2661 static inline void
2662 qla2x00_pci_module_exit(void)
2663 {
2664         pci_unregister_driver(&qla2xxx_pci_driver);
2665 }
2666
2667 #endif
2668
2669 /**
2670  * qla2x00_module_init - Module initialization.
2671  **/
2672 static int __init
2673 qla2x00_module_init(void)
2674 {
2675         int ret = 0;
2676
2677         /* Allocate cache for SRBs. */
2678         srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2679             SLAB_HWCACHE_ALIGN, NULL, NULL);
2680         if (srb_cachep == NULL) {
2681                 printk(KERN_ERR
2682                     "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2683                 return -ENOMEM;
2684         }
2685
2686         /* Derive version string. */
2687         strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2688 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2689         strcat(qla2x00_version_str, "-fw");
2690 #endif
2691 #if DEBUG_QLA2100
2692         strcat(qla2x00_version_str, "-debug");
2693 #endif
2694         qla2xxx_transport_template =
2695             fc_attach_transport(&qla2xxx_transport_functions);
2696         if (!qla2xxx_transport_template)
2697                 return -ENODEV;
2698
2699         printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2700         ret = qla2x00_pci_module_init();
2701         if (ret) {
2702                 kmem_cache_destroy(srb_cachep);
2703                 fc_release_transport(qla2xxx_transport_template);
2704         }
2705         return ret;
2706 }
2707
2708 /**
2709  * qla2x00_module_exit - Module cleanup.
2710  **/
2711 static void __exit
2712 qla2x00_module_exit(void)
2713 {
2714         qla2x00_pci_module_exit();
2715         qla2x00_release_firmware();
2716         kmem_cache_destroy(srb_cachep);
2717         fc_release_transport(qla2xxx_transport_template);
2718 }
2719
2720 module_init(qla2x00_module_init);
2721 module_exit(qla2x00_module_exit);
2722
2723 MODULE_AUTHOR("QLogic Corporation");
2724 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2725 MODULE_LICENSE("GPL");
2726 MODULE_VERSION(QLA2XXX_VERSION);