1 ##################################
2 ## These are production boards.
3 ##################################
5 #Unset by default, but can be explicitly set later.
8 ifneq (,$(findstring $(board),apimote1))
11 config := monitor spi ccspi
12 MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
16 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
21 ifneq (,$(findstring $(board),goodfet21))
26 ifneq (,$(findstring $(board),goodfet30 goodfet31))
29 # This will link to fit in a '2254, so unneeded packages should be omited.
34 ifneq (,$(findstring $(board),goodfet40 goodfet41))
40 ifneq (,$(findstring $(board),stm32f4discovery))
42 periph ?= /opt/STM32F4xx_StdPeriph_Driver
43 discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
45 usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
46 usbsrc ?= $(usbcore)/src
47 otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
48 otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
50 pincs ?= -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
51 psrc ?= /opt/STM32F4xx_StdPeriph_Driver/src
54 GCC = arm-none-eabi-gcc
55 CC = arm-none-eabi-gcc
56 LD = arm-none-eabi-ld -v
59 CP = arm-none-eabi-objcopy
60 OD = arm-none-eabi-objdump
61 CFLAGS = -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb $(pincs)
62 AFLAGS = -ahls -mapcs-32
63 LFLAGS = -Ttmplink.cmd -nostartfiles
70 platform := stm32f4discovery
74 #usblibs = $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
75 extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs)
79 ifneq (,$(findstring $(board),facedancer10 facedancer11))
82 config = monitor spi maxusb
88 config = monitor spi ccspi
89 MSP430BSL?=goodfet.bsl --z1 --speed=38400
92 ifneq (,$(findstring $(board),goodfet24))
98 ifneq (,$(findstring $(board),nhb12b))
104 ifneq (,$(findstring $(board),nhb12))
110 ifneq (,$(findstring $(board),goodfet50 goodfet51))
115 ifeq ($(board),telosb)
118 config := monitor spi ccspi
122 ifeq ($(board),telosbbt)
125 config := monitor spi ccspi
131 ##################################
132 ## These are experimental boards.
133 ##################################
135 ifneq (,$(findstring $(board),donbfet))
140 CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
141 config := monitor avr spi jscan
144 ifneq (,$(findstring $(board),arduino))
147 #BSL := avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
152 ifneq (,$(findstring $(board),tilaunchpad))
154 CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
155 CFLAGS+= -Werror -Wall
156 config := monitor chipcon i2c
163 $(error Please define board, as explained in the README)
165 #platform := $(board)
167 AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2 maxusb
176 CONFIG_jtag430x2 ?= y
180 CONFIG_jtagxscale ?= n
189 CONFIG_smartcard ?= n
193 #The CONFIG_foo vars are only interpreted if $(config) is "unset".
194 ifeq ($(config),undef)
195 config += $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))