1 ##################################
2 ## These are production boards.
3 ##################################
5 #Unset by default, but can be explicitly overwritten.
8 ifneq (,$(findstring $(board),apimote1 apimote))
11 config := monitor spi ccspi
12 MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
13 CFLAGS += -Duseuart1 -Dapimote
16 ifneq (,$(findstring $(board),goodthopter01 goodthopter10 goodthopter11))
22 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
27 ifneq (,$(findstring $(board),goodfet21,goodfet22))
32 ifneq (,$(findstring $(board),goodfet30 goodfet31))
35 # This will link to fit in a '2254, so unneeded packages should be omited.
40 ifneq (,$(findstring $(board),goodfet40 goodfet41 goodfet42))
46 ifneq (,$(findstring $(board),stm32f4discovery))
48 periph ?= /opt/STM32F4xx_StdPeriph_Driver
49 discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
51 usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
52 usbsrc ?= $(usbcore)/src
53 otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
54 otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
56 pincs ?= -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
57 psrc ?= /opt/STM32F4xx_StdPeriph_Driver/src
60 GCC = arm-none-eabi-gcc
61 CC = arm-none-eabi-gcc
62 LD = arm-none-eabi-ld -v
65 CP = arm-none-eabi-objcopy
66 OD = arm-none-eabi-objdump
67 CFLAGS = -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb $(pincs)
68 AFLAGS = -ahls -mapcs-32
69 LFLAGS = -Ttmplink.cmd -nostartfiles
76 platform := stm32f4discovery
80 #usblibs = $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
81 extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs)
85 ifneq (,$(findstring $(board),facedancer10 facedancer11 facedancer20 facedancer21))
88 config = monitor spi maxusb
94 config = monitor spi ccspi
95 MSP430BSL?=goodfet.bsl --z1 --speed=38400
98 ifneq (,$(findstring $(board),goodfet24))
104 ifneq (,$(findstring $(board),nhb12b))
110 ifneq (,$(findstring $(board),nhb12))
116 ifneq (,$(findstring $(board),goodfet50 goodfet51))
121 ifeq ($(board),telosb)
124 config := monitor spi ccspi
128 ifeq ($(board),telosbbt)
131 config := monitor spi ccspi
137 ##################################
138 ## These are experimental boards.
139 ##################################
141 ifneq (,$(findstring $(board),donbfet))
146 CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
147 config := monitor avr spi jscan
150 ifneq (,$(findstring $(board),zigduino))
155 CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
156 config := monitor atmel_radio #avr spi
157 AVR_PLATFORM := m128rfa1
161 ifneq (,$(findstring $(board),arduino))
164 #BSL := avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
169 ifneq (,$(findstring $(board),tilaunchpad))
171 CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
173 config := monitor chipcon i2c
180 $(error Please define board, as explained in the README)
182 #platform := $(board)
184 AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2 maxusb atmel_radio
193 CONFIG_jtag430x2 ?= y
197 CONFIG_jtagxscale ?= n
206 CONFIG_smartcard ?= n
209 CONFIG_atmel_radio ?=n
211 #The CONFIG_foo vars are only interpreted if $(config) is "unset".
212 ifeq ($(config),undef)
213 config += $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))