[PATCH] lockdep: add local_irq_enable_in_hardirq() API
[powerpc.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <asm/atomic.h>
14 #include <asm/ptrace.h>
15 #include <asm/system.h>
16
17 /*
18  * These correspond to the IORESOURCE_IRQ_* defines in
19  * linux/ioport.h to select the interrupt line behaviour.  When
20  * requesting an interrupt without specifying a IRQF_TRIGGER, the
21  * setting should be assumed to be "as already configured", which
22  * may be as per machine or firmware initialisation.
23  */
24 #define IRQF_TRIGGER_NONE       0x00000000
25 #define IRQF_TRIGGER_RISING     0x00000001
26 #define IRQF_TRIGGER_FALLING    0x00000002
27 #define IRQF_TRIGGER_HIGH       0x00000004
28 #define IRQF_TRIGGER_LOW        0x00000008
29 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
30                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
31 #define IRQF_TRIGGER_PROBE      0x00000010
32
33 /*
34  * These flags used only by the kernel as part of the
35  * irq handling routines.
36  *
37  * IRQF_DISABLED - keep irqs disabled when calling the action handler
38  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
39  * IRQF_SHARED - allow sharing the irq among several devices
40  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
41  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
42  */
43 #define IRQF_DISABLED           0x00000020
44 #define IRQF_SAMPLE_RANDOM      0x00000040
45 #define IRQF_SHARED             0x00000080
46 #define IRQF_PROBE_SHARED       0x00000100
47 #define IRQF_TIMER              0x00000200
48 #define IRQF_PERCPU             0x00000400
49
50 /*
51  * Migration helpers. Scheduled for removal in 1/2007
52  * Do not use for new code !
53  */
54 #define SA_INTERRUPT            IRQF_DISABLED
55 #define SA_SAMPLE_RANDOM        IRQF_SAMPLE_RANDOM
56 #define SA_SHIRQ                IRQF_SHARED
57 #define SA_PROBEIRQ             IRQF_PROBE_SHARED
58 #define SA_PERCPU               IRQF_PERCPU
59
60 #define SA_TRIGGER_LOW          IRQF_TRIGGER_LOW
61 #define SA_TRIGGER_HIGH         IRQF_TRIGGER_HIGH
62 #define SA_TRIGGER_FALLING      IRQF_TRIGGER_FALLING
63 #define SA_TRIGGER_RISING       IRQF_TRIGGER_RISING
64 #define SA_TRIGGER_MASK         IRQF_TRIGGER_MASK
65
66 struct irqaction {
67         irqreturn_t (*handler)(int, void *, struct pt_regs *);
68         unsigned long flags;
69         cpumask_t mask;
70         const char *name;
71         void *dev_id;
72         struct irqaction *next;
73         int irq;
74         struct proc_dir_entry *dir;
75 };
76
77 extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
78 extern int request_irq(unsigned int,
79                        irqreturn_t (*handler)(int, void *, struct pt_regs *),
80                        unsigned long, const char *, void *);
81 extern void free_irq(unsigned int, void *);
82
83 /*
84  * On lockdep we dont want to enable hardirqs in hardirq
85  * context. Use local_irq_enable_in_hardirq() to annotate
86  * kernel code that has to do this nevertheless (pretty much
87  * the only valid case is for old/broken hardware that is
88  * insanely slow).
89  *
90  * NOTE: in theory this might break fragile code that relies
91  * on hardirq delivery - in practice we dont seem to have such
92  * places left. So the only effect should be slightly increased
93  * irqs-off latencies.
94  */
95 #ifdef CONFIG_LOCKDEP
96 # define local_irq_enable_in_hardirq()  do { } while (0)
97 #else
98 # define local_irq_enable_in_hardirq()  local_irq_enable()
99 #endif
100
101 #ifdef CONFIG_GENERIC_HARDIRQS
102 extern void disable_irq_nosync(unsigned int irq);
103 extern void disable_irq(unsigned int irq);
104 extern void enable_irq(unsigned int irq);
105
106 /*
107  * Special lockdep variants of irq disabling/enabling.
108  * These should be used for locking constructs that
109  * know that a particular irq context which is disabled,
110  * and which is the only irq-context user of a lock,
111  * that it's safe to take the lock in the irq-disabled
112  * section without disabling hardirqs.
113  *
114  * On !CONFIG_LOCKDEP they are equivalent to the normal
115  * irq disable/enable methods.
116  */
117 static inline void disable_irq_nosync_lockdep(unsigned int irq)
118 {
119         disable_irq_nosync(irq);
120 #ifdef CONFIG_LOCKDEP
121         local_irq_disable();
122 #endif
123 }
124
125 static inline void disable_irq_lockdep(unsigned int irq)
126 {
127         disable_irq(irq);
128 #ifdef CONFIG_LOCKDEP
129         local_irq_disable();
130 #endif
131 }
132
133 static inline void enable_irq_lockdep(unsigned int irq)
134 {
135 #ifdef CONFIG_LOCKDEP
136         local_irq_enable();
137 #endif
138         enable_irq(irq);
139 }
140
141 /* IRQ wakeup (PM) control: */
142 extern int set_irq_wake(unsigned int irq, unsigned int on);
143
144 static inline int enable_irq_wake(unsigned int irq)
145 {
146         return set_irq_wake(irq, 1);
147 }
148
149 static inline int disable_irq_wake(unsigned int irq)
150 {
151         return set_irq_wake(irq, 0);
152 }
153
154 #else /* !CONFIG_GENERIC_HARDIRQS */
155 /*
156  * NOTE: non-genirq architectures, if they want to support the lock
157  * validator need to define the methods below in their asm/irq.h
158  * files, under an #ifdef CONFIG_LOCKDEP section.
159  */
160 # ifndef CONFIG_LOCKDEP
161 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
162 #  define disable_irq_lockdep(irq)              disable_irq(irq)
163 #  define enable_irq_lockdep(irq)               enable_irq(irq)
164 # endif
165
166 #endif /* CONFIG_GENERIC_HARDIRQS */
167
168 #ifndef __ARCH_SET_SOFTIRQ_PENDING
169 #define set_softirq_pending(x) (local_softirq_pending() = (x))
170 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
171 #endif
172
173 /*
174  * Temporary defines for UP kernels, until all code gets fixed.
175  */
176 #ifndef CONFIG_SMP
177 static inline void __deprecated cli(void)
178 {
179         local_irq_disable();
180 }
181 static inline void __deprecated sti(void)
182 {
183         local_irq_enable();
184 }
185 static inline void __deprecated save_flags(unsigned long *x)
186 {
187         local_save_flags(*x);
188 }
189 #define save_flags(x) save_flags(&x)
190 static inline void __deprecated restore_flags(unsigned long x)
191 {
192         local_irq_restore(x);
193 }
194
195 static inline void __deprecated save_and_cli(unsigned long *x)
196 {
197         local_irq_save(*x);
198 }
199 #define save_and_cli(x) save_and_cli(&x)
200 #endif /* CONFIG_SMP */
201
202 /* SoftIRQ primitives.  */
203 #define local_bh_disable() \
204                 do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0)
205 #define __local_bh_enable() \
206                 do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0)
207
208 extern void local_bh_enable(void);
209
210 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
211    frequency threaded job scheduling. For almost all the purposes
212    tasklets are more than enough. F.e. all serial device BHs et
213    al. should be converted to tasklets, not to softirqs.
214  */
215
216 enum
217 {
218         HI_SOFTIRQ=0,
219         TIMER_SOFTIRQ,
220         NET_TX_SOFTIRQ,
221         NET_RX_SOFTIRQ,
222         BLOCK_SOFTIRQ,
223         TASKLET_SOFTIRQ
224 };
225
226 /* softirq mask and active fields moved to irq_cpustat_t in
227  * asm/hardirq.h to get better cache usage.  KAO
228  */
229
230 struct softirq_action
231 {
232         void    (*action)(struct softirq_action *);
233         void    *data;
234 };
235
236 asmlinkage void do_softirq(void);
237 extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
238 extern void softirq_init(void);
239 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
240 extern void FASTCALL(raise_softirq_irqoff(unsigned int nr));
241 extern void FASTCALL(raise_softirq(unsigned int nr));
242
243
244 /* Tasklets --- multithreaded analogue of BHs.
245
246    Main feature differing them of generic softirqs: tasklet
247    is running only on one CPU simultaneously.
248
249    Main feature differing them of BHs: different tasklets
250    may be run simultaneously on different CPUs.
251
252    Properties:
253    * If tasklet_schedule() is called, then tasklet is guaranteed
254      to be executed on some cpu at least once after this.
255    * If the tasklet is already scheduled, but its excecution is still not
256      started, it will be executed only once.
257    * If this tasklet is already running on another CPU (or schedule is called
258      from tasklet itself), it is rescheduled for later.
259    * Tasklet is strictly serialized wrt itself, but not
260      wrt another tasklets. If client needs some intertask synchronization,
261      he makes it with spinlocks.
262  */
263
264 struct tasklet_struct
265 {
266         struct tasklet_struct *next;
267         unsigned long state;
268         atomic_t count;
269         void (*func)(unsigned long);
270         unsigned long data;
271 };
272
273 #define DECLARE_TASKLET(name, func, data) \
274 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
275
276 #define DECLARE_TASKLET_DISABLED(name, func, data) \
277 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
278
279
280 enum
281 {
282         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
283         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
284 };
285
286 #ifdef CONFIG_SMP
287 static inline int tasklet_trylock(struct tasklet_struct *t)
288 {
289         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
290 }
291
292 static inline void tasklet_unlock(struct tasklet_struct *t)
293 {
294         smp_mb__before_clear_bit(); 
295         clear_bit(TASKLET_STATE_RUN, &(t)->state);
296 }
297
298 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
299 {
300         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
301 }
302 #else
303 #define tasklet_trylock(t) 1
304 #define tasklet_unlock_wait(t) do { } while (0)
305 #define tasklet_unlock(t) do { } while (0)
306 #endif
307
308 extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t));
309
310 static inline void tasklet_schedule(struct tasklet_struct *t)
311 {
312         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
313                 __tasklet_schedule(t);
314 }
315
316 extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t));
317
318 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
319 {
320         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
321                 __tasklet_hi_schedule(t);
322 }
323
324
325 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
326 {
327         atomic_inc(&t->count);
328         smp_mb__after_atomic_inc();
329 }
330
331 static inline void tasklet_disable(struct tasklet_struct *t)
332 {
333         tasklet_disable_nosync(t);
334         tasklet_unlock_wait(t);
335         smp_mb();
336 }
337
338 static inline void tasklet_enable(struct tasklet_struct *t)
339 {
340         smp_mb__before_atomic_dec();
341         atomic_dec(&t->count);
342 }
343
344 static inline void tasklet_hi_enable(struct tasklet_struct *t)
345 {
346         smp_mb__before_atomic_dec();
347         atomic_dec(&t->count);
348 }
349
350 extern void tasklet_kill(struct tasklet_struct *t);
351 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
352 extern void tasklet_init(struct tasklet_struct *t,
353                          void (*func)(unsigned long), unsigned long data);
354
355 /*
356  * Autoprobing for irqs:
357  *
358  * probe_irq_on() and probe_irq_off() provide robust primitives
359  * for accurate IRQ probing during kernel initialization.  They are
360  * reasonably simple to use, are not "fooled" by spurious interrupts,
361  * and, unlike other attempts at IRQ probing, they do not get hung on
362  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
363  *
364  * For reasonably foolproof probing, use them as follows:
365  *
366  * 1. clear and/or mask the device's internal interrupt.
367  * 2. sti();
368  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
369  * 4. enable the device and cause it to trigger an interrupt.
370  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
371  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
372  * 7. service the device to clear its pending interrupt.
373  * 8. loop again if paranoia is required.
374  *
375  * probe_irq_on() returns a mask of allocated irq's.
376  *
377  * probe_irq_off() takes the mask as a parameter,
378  * and returns the irq number which occurred,
379  * or zero if none occurred, or a negative irq number
380  * if more than one irq occurred.
381  */
382
383 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
384 static inline unsigned long probe_irq_on(void)
385 {
386         return 0;
387 }
388 static inline int probe_irq_off(unsigned long val)
389 {
390         return 0;
391 }
392 static inline unsigned int probe_irq_mask(unsigned long val)
393 {
394         return 0;
395 }
396 #else
397 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
398 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
399 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
400 #endif
401
402 #endif