/spare/repo/netdev-2.6 branch 'ieee80211'
[powerpc.git] / include / net / ieee80211.h
1 /*
2  * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
3  * remains copyright by the original authors
4  *
5  * Portions of the merged code are based on Host AP (software wireless
6  * LAN access point) driver for Intersil Prism2/2.5/3.
7  *
8  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
9  * <jkmaline@cc.hut.fi>
10  * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
11  *
12  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13  * <jketreno@linux.intel.com>
14  * Copyright (c) 2004, Intel Corporation
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License version 2 as
18  * published by the Free Software Foundation. See README and COPYING for
19  * more details.
20  */
21 #ifndef IEEE80211_H
22 #define IEEE80211_H
23 #include <linux/if_ether.h> /* ETH_ALEN */
24 #include <linux/kernel.h>   /* ARRAY_SIZE */
25 #include <linux/wireless.h>
26
27 #if WIRELESS_EXT < 17
28 #define IW_QUAL_QUAL_INVALID   0x10
29 #define IW_QUAL_LEVEL_INVALID  0x20
30 #define IW_QUAL_NOISE_INVALID  0x40
31 #define IW_QUAL_QUAL_UPDATED   0x1
32 #define IW_QUAL_LEVEL_UPDATED  0x2
33 #define IW_QUAL_NOISE_UPDATED  0x4
34 #endif
35
36 #define IEEE80211_DATA_LEN              2304
37 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
38    6.2.1.1.2.
39
40    The figure in section 7.1.2 suggests a body size of up to 2312
41    bytes is allowed, which is a bit confusing, I suspect this
42    represents the 2304 bytes of real data, plus a possible 8 bytes of
43    WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
44
45
46 #define IEEE80211_HLEN                  30
47 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
48
49 struct ieee80211_hdr {
50         __le16 frame_ctl;
51         __le16 duration_id;
52         u8 addr1[ETH_ALEN];
53         u8 addr2[ETH_ALEN];
54         u8 addr3[ETH_ALEN];
55         __le16 seq_ctl;
56         u8 addr4[ETH_ALEN];
57 } __attribute__ ((packed));
58
59 struct ieee80211_hdr_3addr {
60         __le16 frame_ctl;
61         __le16 duration_id;
62         u8 addr1[ETH_ALEN];
63         u8 addr2[ETH_ALEN];
64         u8 addr3[ETH_ALEN];
65         __le16 seq_ctl;
66 } __attribute__ ((packed));
67
68 enum eap_type {
69         EAP_PACKET = 0,
70         EAPOL_START,
71         EAPOL_LOGOFF,
72         EAPOL_KEY,
73         EAPOL_ENCAP_ASF_ALERT
74 };
75
76 static const char *eap_types[] = {
77         [EAP_PACKET]            = "EAP-Packet",
78         [EAPOL_START]           = "EAPOL-Start",
79         [EAPOL_LOGOFF]          = "EAPOL-Logoff",
80         [EAPOL_KEY]             = "EAPOL-Key",
81         [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
82 };
83
84 static inline const char *eap_get_type(int type)
85 {
86         return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
87 }
88
89 struct eapol {
90         u8 snap[6];
91         __be16 ethertype;
92         u8 version;
93         u8 type;
94         __be16 length;
95 } __attribute__ ((packed));
96
97 #define IEEE80211_1ADDR_LEN 10
98 #define IEEE80211_2ADDR_LEN 16
99 #define IEEE80211_3ADDR_LEN 24
100 #define IEEE80211_4ADDR_LEN 30
101 #define IEEE80211_FCS_LEN    4
102
103 #define MIN_FRAG_THRESHOLD     256U
104 #define MAX_FRAG_THRESHOLD     2346U
105
106 /* Frame control field constants */
107 #define IEEE80211_FCTL_VERS             0x0003
108 #define IEEE80211_FCTL_FTYPE            0x000c
109 #define IEEE80211_FCTL_STYPE            0x00f0
110 #define IEEE80211_FCTL_TODS             0x0100
111 #define IEEE80211_FCTL_FROMDS           0x0200
112 #define IEEE80211_FCTL_MOREFRAGS        0x0400
113 #define IEEE80211_FCTL_RETRY            0x0800
114 #define IEEE80211_FCTL_PM               0x1000
115 #define IEEE80211_FCTL_MOREDATA         0x2000
116 #define IEEE80211_FCTL_PROTECTED        0x4000
117 #define IEEE80211_FCTL_ORDER            0x8000
118
119 #define IEEE80211_FTYPE_MGMT            0x0000
120 #define IEEE80211_FTYPE_CTL             0x0004
121 #define IEEE80211_FTYPE_DATA            0x0008
122
123 /* management */
124 #define IEEE80211_STYPE_ASSOC_REQ       0x0000
125 #define IEEE80211_STYPE_ASSOC_RESP      0x0010
126 #define IEEE80211_STYPE_REASSOC_REQ     0x0020
127 #define IEEE80211_STYPE_REASSOC_RESP    0x0030
128 #define IEEE80211_STYPE_PROBE_REQ       0x0040
129 #define IEEE80211_STYPE_PROBE_RESP      0x0050
130 #define IEEE80211_STYPE_BEACON          0x0080
131 #define IEEE80211_STYPE_ATIM            0x0090
132 #define IEEE80211_STYPE_DISASSOC        0x00A0
133 #define IEEE80211_STYPE_AUTH            0x00B0
134 #define IEEE80211_STYPE_DEAUTH          0x00C0
135 #define IEEE80211_STYPE_ACTION          0x00D0
136
137 /* control */
138 #define IEEE80211_STYPE_PSPOLL          0x00A0
139 #define IEEE80211_STYPE_RTS             0x00B0
140 #define IEEE80211_STYPE_CTS             0x00C0
141 #define IEEE80211_STYPE_ACK             0x00D0
142 #define IEEE80211_STYPE_CFEND           0x00E0
143 #define IEEE80211_STYPE_CFENDACK        0x00F0
144
145 /* data */
146 #define IEEE80211_STYPE_DATA            0x0000
147 #define IEEE80211_STYPE_DATA_CFACK      0x0010
148 #define IEEE80211_STYPE_DATA_CFPOLL     0x0020
149 #define IEEE80211_STYPE_DATA_CFACKPOLL  0x0030
150 #define IEEE80211_STYPE_NULLFUNC        0x0040
151 #define IEEE80211_STYPE_CFACK           0x0050
152 #define IEEE80211_STYPE_CFPOLL          0x0060
153 #define IEEE80211_STYPE_CFACKPOLL       0x0070
154
155 #define IEEE80211_SCTL_FRAG             0x000F
156 #define IEEE80211_SCTL_SEQ              0xFFF0
157
158
159 /* debug macros */
160
161 #ifdef CONFIG_IEEE80211_DEBUG
162 extern u32 ieee80211_debug_level;
163 #define IEEE80211_DEBUG(level, fmt, args...) \
164 do { if (ieee80211_debug_level & (level)) \
165   printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
166          in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
167 #else
168 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
169 #endif  /* CONFIG_IEEE80211_DEBUG */
170
171
172 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
173
174 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
175 #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
176
177 /* escape_essid() is intended to be used in debug (and possibly error)
178  * messages. It should never be used for passing essid to user space. */
179 const char *escape_essid(const char *essid, u8 essid_len);
180
181
182 /*
183  * To use the debug system:
184  *
185  * If you are defining a new debug classification, simply add it to the #define
186  * list here in the form of:
187  *
188  * #define IEEE80211_DL_xxxx VALUE
189  *
190  * shifting value to the left one bit from the previous entry.  xxxx should be
191  * the name of the classification (for example, WEP)
192  *
193  * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
194  * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
195  * to send output to that classification.
196  *
197  * To add your debug level to the list of levels seen when you perform
198  *
199  * % cat /proc/net/ipw/debug_level
200  *
201  * you simply need to add your entry to the ipw_debug_levels array.
202  *
203  * If you do not see debug_level in /proc/net/ipw then you do not have
204  * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
205  *
206  */
207
208 #define IEEE80211_DL_INFO          (1<<0)
209 #define IEEE80211_DL_WX            (1<<1)
210 #define IEEE80211_DL_SCAN          (1<<2)
211 #define IEEE80211_DL_STATE         (1<<3)
212 #define IEEE80211_DL_MGMT          (1<<4)
213 #define IEEE80211_DL_FRAG          (1<<5)
214 #define IEEE80211_DL_EAP           (1<<6)
215 #define IEEE80211_DL_DROP          (1<<7)
216
217 #define IEEE80211_DL_TX            (1<<8)
218 #define IEEE80211_DL_RX            (1<<9)
219
220 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
221 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
222 #define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
223
224 #define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
225 #define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
226 #define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
227 #define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
228 #define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
229 #define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
230 #define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
231 #define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
232 #define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
233 #include <linux/netdevice.h>
234 #include <linux/wireless.h>
235 #include <linux/if_arp.h> /* ARPHRD_ETHER */
236
237 #ifndef WIRELESS_SPY
238 #define WIRELESS_SPY            /* enable iwspy support */
239 #endif
240 #include <net/iw_handler.h>     /* new driver API */
241
242 #ifndef ETH_P_PAE
243 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
244 #endif /* ETH_P_PAE */
245
246 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
247
248 #ifndef ETH_P_80211_RAW
249 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
250 #endif
251
252 /* IEEE 802.11 defines */
253
254 #define P80211_OUI_LEN 3
255
256 struct ieee80211_snap_hdr {
257
258         u8    dsap;   /* always 0xAA */
259         u8    ssap;   /* always 0xAA */
260         u8    ctrl;   /* always 0x03 */
261         u8    oui[P80211_OUI_LEN];    /* organizational universal id */
262
263 } __attribute__ ((packed));
264
265 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
266
267 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
268 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
269 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
270
271 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
272 #define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
273
274 /* Authentication algorithms */
275 #define WLAN_AUTH_OPEN 0
276 #define WLAN_AUTH_SHARED_KEY 1
277
278 #define WLAN_AUTH_CHALLENGE_LEN 128
279
280 #define WLAN_CAPABILITY_ESS (1<<0)
281 #define WLAN_CAPABILITY_IBSS (1<<1)
282 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
283 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
284 #define WLAN_CAPABILITY_PRIVACY (1<<4)
285 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
286 #define WLAN_CAPABILITY_PBCC (1<<6)
287 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
288 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
289 #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
290 #define WLAN_CAPABILITY_OSSS_OFDM (1<<13)
291
292 /* Status codes */
293 enum ieee80211_statuscode {
294         WLAN_STATUS_SUCCESS = 0,
295         WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
296         WLAN_STATUS_CAPS_UNSUPPORTED = 10,
297         WLAN_STATUS_REASSOC_NO_ASSOC = 11,
298         WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
299         WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
300         WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
301         WLAN_STATUS_CHALLENGE_FAIL = 15,
302         WLAN_STATUS_AUTH_TIMEOUT = 16,
303         WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
304         WLAN_STATUS_ASSOC_DENIED_RATES = 18,
305         /* 802.11b */
306         WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
307         WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
308         WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
309         /* 802.11h */
310         WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
311         WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
312         WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
313         /* 802.11g */
314         WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
315         WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
316         /* 802.11i */
317         WLAN_STATUS_INVALID_IE = 40,
318         WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
319         WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
320         WLAN_STATUS_INVALID_AKMP = 43,
321         WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
322         WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
323         WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
324 };
325
326 /* Reason codes */
327 enum ieee80211_reasoncode {
328         WLAN_REASON_UNSPECIFIED = 1,
329         WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
330         WLAN_REASON_DEAUTH_LEAVING = 3,
331         WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
332         WLAN_REASON_DISASSOC_AP_BUSY = 5,
333         WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
334         WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
335         WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
336         WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
337         /* 802.11h */
338         WLAN_REASON_DISASSOC_BAD_POWER = 10,
339         WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
340         /* 802.11i */
341         WLAN_REASON_INVALID_IE = 13,
342         WLAN_REASON_MIC_FAILURE = 14,
343         WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
344         WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
345         WLAN_REASON_IE_DIFFERENT = 17,
346         WLAN_REASON_INVALID_GROUP_CIPHER = 18,
347         WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
348         WLAN_REASON_INVALID_AKMP = 20,
349         WLAN_REASON_UNSUPP_RSN_VERSION = 21,
350         WLAN_REASON_INVALID_RSN_IE_CAP = 22,
351         WLAN_REASON_IEEE8021X_FAILED = 23,
352         WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
353 };
354
355
356 #define IEEE80211_STATMASK_SIGNAL (1<<0)
357 #define IEEE80211_STATMASK_RSSI (1<<1)
358 #define IEEE80211_STATMASK_NOISE (1<<2)
359 #define IEEE80211_STATMASK_RATE (1<<3)
360 #define IEEE80211_STATMASK_WEMASK 0x7
361
362
363 #define IEEE80211_CCK_MODULATION    (1<<0)
364 #define IEEE80211_OFDM_MODULATION   (1<<1)
365
366 #define IEEE80211_24GHZ_BAND     (1<<0)
367 #define IEEE80211_52GHZ_BAND     (1<<1)
368
369 #define IEEE80211_CCK_RATE_1MB                  0x02
370 #define IEEE80211_CCK_RATE_2MB                  0x04
371 #define IEEE80211_CCK_RATE_5MB                  0x0B
372 #define IEEE80211_CCK_RATE_11MB                 0x16
373 #define IEEE80211_OFDM_RATE_6MB                 0x0C
374 #define IEEE80211_OFDM_RATE_9MB                 0x12
375 #define IEEE80211_OFDM_RATE_12MB                0x18
376 #define IEEE80211_OFDM_RATE_18MB                0x24
377 #define IEEE80211_OFDM_RATE_24MB                0x30
378 #define IEEE80211_OFDM_RATE_36MB                0x48
379 #define IEEE80211_OFDM_RATE_48MB                0x60
380 #define IEEE80211_OFDM_RATE_54MB                0x6C
381 #define IEEE80211_BASIC_RATE_MASK               0x80
382
383 #define IEEE80211_CCK_RATE_1MB_MASK             (1<<0)
384 #define IEEE80211_CCK_RATE_2MB_MASK             (1<<1)
385 #define IEEE80211_CCK_RATE_5MB_MASK             (1<<2)
386 #define IEEE80211_CCK_RATE_11MB_MASK            (1<<3)
387 #define IEEE80211_OFDM_RATE_6MB_MASK            (1<<4)
388 #define IEEE80211_OFDM_RATE_9MB_MASK            (1<<5)
389 #define IEEE80211_OFDM_RATE_12MB_MASK           (1<<6)
390 #define IEEE80211_OFDM_RATE_18MB_MASK           (1<<7)
391 #define IEEE80211_OFDM_RATE_24MB_MASK           (1<<8)
392 #define IEEE80211_OFDM_RATE_36MB_MASK           (1<<9)
393 #define IEEE80211_OFDM_RATE_48MB_MASK           (1<<10)
394 #define IEEE80211_OFDM_RATE_54MB_MASK           (1<<11)
395
396 #define IEEE80211_CCK_RATES_MASK                0x0000000F
397 #define IEEE80211_CCK_BASIC_RATES_MASK  (IEEE80211_CCK_RATE_1MB_MASK | \
398         IEEE80211_CCK_RATE_2MB_MASK)
399 #define IEEE80211_CCK_DEFAULT_RATES_MASK        (IEEE80211_CCK_BASIC_RATES_MASK | \
400         IEEE80211_CCK_RATE_5MB_MASK | \
401         IEEE80211_CCK_RATE_11MB_MASK)
402
403 #define IEEE80211_OFDM_RATES_MASK               0x00000FF0
404 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
405         IEEE80211_OFDM_RATE_12MB_MASK | \
406         IEEE80211_OFDM_RATE_24MB_MASK)
407 #define IEEE80211_OFDM_DEFAULT_RATES_MASK       (IEEE80211_OFDM_BASIC_RATES_MASK | \
408         IEEE80211_OFDM_RATE_9MB_MASK  | \
409         IEEE80211_OFDM_RATE_18MB_MASK | \
410         IEEE80211_OFDM_RATE_36MB_MASK | \
411         IEEE80211_OFDM_RATE_48MB_MASK | \
412         IEEE80211_OFDM_RATE_54MB_MASK)
413 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
414                                 IEEE80211_CCK_DEFAULT_RATES_MASK)
415
416 #define IEEE80211_NUM_OFDM_RATES            8
417 #define IEEE80211_NUM_CCK_RATES             4
418 #define IEEE80211_OFDM_SHIFT_MASK_A         4
419
420
421
422
423 /* NOTE: This data is for statistical purposes; not all hardware provides this
424  *       information for frames received.  Not setting these will not cause
425  *       any adverse affects. */
426 struct ieee80211_rx_stats {
427         u32 mac_time;
428         s8 rssi;
429         u8 signal;
430         u8 noise;
431         u16 rate; /* in 100 kbps */
432         u8 received_channel;
433         u8 control;
434         u8 mask;
435         u8 freq;
436         u16 len;
437 };
438
439 /* IEEE 802.11 requires that STA supports concurrent reception of at least
440  * three fragmented frames. This define can be increased to support more
441  * concurrent frames, but it should be noted that each entry can consume about
442  * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
443 #define IEEE80211_FRAG_CACHE_LEN 4
444
445 struct ieee80211_frag_entry {
446         unsigned long first_frag_time;
447         unsigned int seq;
448         unsigned int last_frag;
449         struct sk_buff *skb;
450         u8 src_addr[ETH_ALEN];
451         u8 dst_addr[ETH_ALEN];
452 };
453
454 struct ieee80211_stats {
455         unsigned int tx_unicast_frames;
456         unsigned int tx_multicast_frames;
457         unsigned int tx_fragments;
458         unsigned int tx_unicast_octets;
459         unsigned int tx_multicast_octets;
460         unsigned int tx_deferred_transmissions;
461         unsigned int tx_single_retry_frames;
462         unsigned int tx_multiple_retry_frames;
463         unsigned int tx_retry_limit_exceeded;
464         unsigned int tx_discards;
465         unsigned int rx_unicast_frames;
466         unsigned int rx_multicast_frames;
467         unsigned int rx_fragments;
468         unsigned int rx_unicast_octets;
469         unsigned int rx_multicast_octets;
470         unsigned int rx_fcs_errors;
471         unsigned int rx_discards_no_buffer;
472         unsigned int tx_discards_wrong_sa;
473         unsigned int rx_discards_undecryptable;
474         unsigned int rx_message_in_msg_fragments;
475         unsigned int rx_message_in_bad_msg_fragments;
476 };
477
478 struct ieee80211_device;
479
480 #include "ieee80211_crypt.h"
481
482 #define SEC_KEY_1         (1<<0)
483 #define SEC_KEY_2         (1<<1)
484 #define SEC_KEY_3         (1<<2)
485 #define SEC_KEY_4         (1<<3)
486 #define SEC_ACTIVE_KEY    (1<<4)
487 #define SEC_AUTH_MODE     (1<<5)
488 #define SEC_UNICAST_GROUP (1<<6)
489 #define SEC_LEVEL         (1<<7)
490 #define SEC_ENABLED       (1<<8)
491
492 #define SEC_LEVEL_0      0 /* None */
493 #define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
494 #define SEC_LEVEL_2      2 /* Level 1 + TKIP */
495 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
496 #define SEC_LEVEL_3      4 /* Level 2 + CCMP */
497
498 #define WEP_KEYS 4
499 #define WEP_KEY_LEN 13
500
501 struct ieee80211_security {
502         u16 active_key:2,
503             enabled:1,
504             auth_mode:2,
505             auth_algo:4,
506             unicast_uses_group:1;
507         u8 key_sizes[WEP_KEYS];
508         u8 keys[WEP_KEYS][WEP_KEY_LEN];
509         u8 level;
510         u16 flags;
511 } __attribute__ ((packed));
512
513
514 /*
515
516  802.11 data frame from AP
517
518       ,-------------------------------------------------------------------.
519 Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
520       |------|------|---------|---------|---------|------|---------|------|
521 Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
522       |      | tion | (BSSID) |         |         | ence |  data   |      |
523       `-------------------------------------------------------------------'
524
525 Total: 28-2340 bytes
526
527 */
528
529 #define BEACON_PROBE_SSID_ID_POSITION 12
530
531 /* Management Frame Information Element Types */
532 enum ieee80211_mfie {
533         MFIE_TYPE_SSID = 0,
534         MFIE_TYPE_RATES = 1,
535         MFIE_TYPE_FH_SET = 2,
536         MFIE_TYPE_DS_SET = 3,
537         MFIE_TYPE_CF_SET =  4,
538         MFIE_TYPE_TIM = 5,
539         MFIE_TYPE_IBSS_SET = 6,
540         MFIE_TYPE_COUNTRY = 7,
541         MFIE_TYPE_HOP_PARAMS = 8,
542         MFIE_TYPE_HOP_TABLE = 9,
543         MFIE_TYPE_REQUEST = 10,
544         MFIE_TYPE_CHALLENGE = 16,
545         MFIE_TYPE_POWER_CONSTRAINT = 32,
546         MFIE_TYPE_POWER_CAPABILITY = 33,
547         MFIE_TYPE_TPC_REQUEST = 34,
548         MFIE_TYPE_TPC_REPORT = 35,
549         MFIE_TYPE_SUPP_CHANNELS = 36,
550         MFIE_TYPE_CSA = 37,
551         MFIE_TYPE_MEASURE_REQUEST = 38,
552         MFIE_TYPE_MEASURE_REPORT = 39,
553         MFIE_TYPE_QUIET = 40,
554         MFIE_TYPE_IBSS_DFS = 41,
555         MFIE_TYPE_ERP_INFO = 42,
556         MFIE_TYPE_RSN = 48,
557         MFIE_TYPE_RATES_EX = 50,
558         MFIE_TYPE_GENERIC = 221,
559 };
560
561 struct ieee80211_info_element_hdr {
562         u8 id;
563         u8 len;
564 } __attribute__ ((packed));
565
566 struct ieee80211_info_element {
567         u8 id;
568         u8 len;
569         u8 data[0];
570 } __attribute__ ((packed));
571
572 /*
573  * These are the data types that can make up management packets
574  *
575         u16 auth_algorithm;
576         u16 auth_sequence;
577         u16 beacon_interval;
578         u16 capability;
579         u8 current_ap[ETH_ALEN];
580         u16 listen_interval;
581         struct {
582                 u16 association_id:14, reserved:2;
583         } __attribute__ ((packed));
584         u32 time_stamp[2];
585         u16 reason;
586         u16 status;
587 */
588
589 struct ieee80211_authentication {
590         struct ieee80211_hdr_3addr header;
591         __le16 algorithm;
592         __le16 transaction;
593         __le16 status;
594         struct ieee80211_info_element info_element;
595 } __attribute__ ((packed));
596
597
598 struct ieee80211_probe_response {
599         struct ieee80211_hdr_3addr header;
600         u32 time_stamp[2];
601         __le16 beacon_interval;
602         __le16 capability;
603         struct ieee80211_info_element info_element;
604 } __attribute__ ((packed));
605
606 struct ieee80211_assoc_request_frame {
607         __le16 capability;
608         __le16 listen_interval;
609         u8 current_ap[ETH_ALEN];
610         struct ieee80211_info_element info_element;
611 } __attribute__ ((packed));
612
613 struct ieee80211_assoc_response_frame {
614         struct ieee80211_hdr_3addr header;
615         __le16 capability;
616         __le16 status;
617         __le16 aid;
618         struct ieee80211_info_element info_element; /* supported rates */
619 } __attribute__ ((packed));
620
621
622 struct ieee80211_txb {
623         u8 nr_frags;
624         u8 encrypted;
625         u16 reserved;
626         u16 frag_size;
627         u16 payload_size;
628         struct sk_buff *fragments[0];
629 };
630
631
632 /* SWEEP TABLE ENTRIES NUMBER */
633 #define MAX_SWEEP_TAB_ENTRIES             42
634 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
635 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
636  * only use 8, and then use extended rates for the remaining supported
637  * rates.  Other APs, however, stick all of their supported rates on the
638  * main rates information element... */
639 #define MAX_RATES_LENGTH                  ((u8)12)
640 #define MAX_RATES_EX_LENGTH               ((u8)16)
641 #define MAX_NETWORK_COUNT                  128
642
643 #define CRC_LENGTH                 4U
644
645 #define MAX_WPA_IE_LEN 64
646
647 #define NETWORK_EMPTY_ESSID (1<<0)
648 #define NETWORK_HAS_OFDM    (1<<1)
649 #define NETWORK_HAS_CCK     (1<<2)
650
651 struct ieee80211_network {
652         /* These entries are used to identify a unique network */
653         u8 bssid[ETH_ALEN];
654         u8 channel;
655         /* Ensure null-terminated for any debug msgs */
656         u8 ssid[IW_ESSID_MAX_SIZE + 1];
657         u8 ssid_len;
658
659         /* These are network statistics */
660         struct ieee80211_rx_stats stats;
661         u16 capability;
662         u8 rates[MAX_RATES_LENGTH];
663         u8 rates_len;
664         u8 rates_ex[MAX_RATES_EX_LENGTH];
665         u8 rates_ex_len;
666         unsigned long last_scanned;
667         u8 mode;
668         u8 flags;
669         u32 last_associate;
670         u32 time_stamp[2];
671         u16 beacon_interval;
672         u16 listen_interval;
673         u16 atim_window;
674         u8 wpa_ie[MAX_WPA_IE_LEN];
675         size_t wpa_ie_len;
676         u8 rsn_ie[MAX_WPA_IE_LEN];
677         size_t rsn_ie_len;
678         struct list_head list;
679 };
680
681 enum ieee80211_state {
682         IEEE80211_UNINITIALIZED = 0,
683         IEEE80211_INITIALIZED,
684         IEEE80211_ASSOCIATING,
685         IEEE80211_ASSOCIATED,
686         IEEE80211_AUTHENTICATING,
687         IEEE80211_AUTHENTICATED,
688         IEEE80211_SHUTDOWN
689 };
690
691 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
692 #define DEFAULT_FTS 2346
693
694
695 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
696 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
697
698 struct ieee80211_device {
699         struct net_device *dev;
700
701         /* Bookkeeping structures */
702         struct net_device_stats stats;
703         struct ieee80211_stats ieee_stats;
704
705         /* Probe / Beacon management */
706         struct list_head network_free_list;
707         struct list_head network_list;
708         struct ieee80211_network *networks;
709         int scans;
710         int scan_age;
711
712         int iw_mode; /* operating mode (IW_MODE_*) */
713
714         spinlock_t lock;
715
716         int tx_headroom; /* Set to size of any additional room needed at front
717                           * of allocated Tx SKBs */
718         u32 config;
719
720         /* WEP and other encryption related settings at the device level */
721         int open_wep; /* Set to 1 to allow unencrypted frames */
722
723         int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
724                                  * WEP key changes */
725
726         /* If the host performs {en,de}cryption, then set to 1 */
727         int host_encrypt;
728         int host_decrypt;
729         int ieee802_1x; /* is IEEE 802.1X used */
730
731         /* WPA data */
732         int wpa_enabled;
733         int drop_unencrypted;
734         int tkip_countermeasures;
735         int privacy_invoked;
736         size_t wpa_ie_len;
737         u8 *wpa_ie;
738
739         struct list_head crypt_deinit_list;
740         struct ieee80211_crypt_data *crypt[WEP_KEYS];
741         int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
742         struct timer_list crypt_deinit_timer;
743
744         int bcrx_sta_key; /* use individual keys to override default keys even
745                            * with RX of broad/multicast frames */
746
747         /* Fragmentation structures */
748         struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
749         unsigned int frag_next_idx;
750         u16 fts; /* Fragmentation Threshold */
751
752         /* Association info */
753         u8 bssid[ETH_ALEN];
754
755         enum ieee80211_state state;
756
757         int mode;       /* A, B, G */
758         int modulation; /* CCK, OFDM */
759         int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
760         int abg_ture;   /* ABG flag              */
761
762         /* Callback functions */
763         void (*set_security)(struct net_device *dev,
764                              struct ieee80211_security *sec);
765         int (*hard_start_xmit)(struct ieee80211_txb *txb,
766                                struct net_device *dev);
767         int (*reset_port)(struct net_device *dev);
768
769         /* This must be the last item so that it points to the data
770          * allocated beyond this structure by alloc_ieee80211 */
771         u8 priv[0];
772 };
773
774 #define IEEE_A            (1<<0)
775 #define IEEE_B            (1<<1)
776 #define IEEE_G            (1<<2)
777 #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
778
779 extern inline void *ieee80211_priv(struct net_device *dev)
780 {
781         return ((struct ieee80211_device *)netdev_priv(dev))->priv;
782 }
783
784 extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
785 {
786         /* Single white space is for Linksys APs */
787         if (essid_len == 1 && essid[0] == ' ')
788                 return 1;
789
790         /* Otherwise, if the entire essid is 0, we assume it is hidden */
791         while (essid_len) {
792                 essid_len--;
793                 if (essid[essid_len] != '\0')
794                         return 0;
795         }
796
797         return 1;
798 }
799
800 extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
801 {
802         /*
803          * It is possible for both access points and our device to support
804          * combinations of modes, so as long as there is one valid combination
805          * of ap/device supported modes, then return success
806          *
807          */
808         if ((mode & IEEE_A) &&
809             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
810             (ieee->freq_band & IEEE80211_52GHZ_BAND))
811                 return 1;
812
813         if ((mode & IEEE_G) &&
814             (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
815             (ieee->freq_band & IEEE80211_24GHZ_BAND))
816                 return 1;
817
818         if ((mode & IEEE_B) &&
819             (ieee->modulation & IEEE80211_CCK_MODULATION) &&
820             (ieee->freq_band & IEEE80211_24GHZ_BAND))
821                 return 1;
822
823         return 0;
824 }
825
826 extern inline int ieee80211_get_hdrlen(u16 fc)
827 {
828         int hdrlen = IEEE80211_3ADDR_LEN;
829
830         switch (WLAN_FC_GET_TYPE(fc)) {
831         case IEEE80211_FTYPE_DATA:
832                 if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
833                         hdrlen = IEEE80211_4ADDR_LEN;
834                 break;
835         case IEEE80211_FTYPE_CTL:
836                 switch (WLAN_FC_GET_STYPE(fc)) {
837                 case IEEE80211_STYPE_CTS:
838                 case IEEE80211_STYPE_ACK:
839                         hdrlen = IEEE80211_1ADDR_LEN;
840                         break;
841                 default:
842                         hdrlen = IEEE80211_2ADDR_LEN;
843                         break;
844                 }
845                 break;
846         }
847
848         return hdrlen;
849 }
850
851
852
853 /* ieee80211.c */
854 extern void free_ieee80211(struct net_device *dev);
855 extern struct net_device *alloc_ieee80211(int sizeof_priv);
856
857 extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
858
859 /* ieee80211_tx.c */
860 extern int ieee80211_xmit(struct sk_buff *skb,
861                           struct net_device *dev);
862 extern void ieee80211_txb_free(struct ieee80211_txb *);
863
864
865 /* ieee80211_rx.c */
866 extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
867                         struct ieee80211_rx_stats *rx_stats);
868 extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
869                              struct ieee80211_hdr *header,
870                              struct ieee80211_rx_stats *stats);
871
872 /* ieee80211_wx.c */
873 extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
874                                  struct iw_request_info *info,
875                                  union iwreq_data *wrqu, char *key);
876 extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
877                                    struct iw_request_info *info,
878                                    union iwreq_data *wrqu, char *key);
879 extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
880                                    struct iw_request_info *info,
881                                    union iwreq_data *wrqu, char *key);
882
883
884 extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
885 {
886         ieee->scans++;
887 }
888
889 extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
890 {
891         return ieee->scans;
892 }
893
894
895 #endif /* IEEE80211_H */