# BK Id: SCCS/s.config.in 1.96 11/27/01 16:34:08 paulus
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
define_bool CONFIG_UID16 n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y
define_bool CONFIG_HAVE_DEC_LOCK y

mainmenu_name "Linux/PowerPC Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Prompt for advanced kernel configuration options' CONFIG_ADVANCED_OPTIONS
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Platform support'
define_bool CONFIG_PPC y
define_bool CONFIG_PPC32 y
choice 'Processor Type'	\
	"6xx/7xx/74xx/8260	CONFIG_6xx	\
	 40x			CONFIG_40x	\
	 440			CONFIG_440	\
	 POWER3               	CONFIG_POWER3	\
	 8xx			CONFIG_8xx	\
	 iSeries		CONFIG_PPC_ISERIES"	6xx

if [ "$CONFIG_40x" = "y" -o "$CONFIG_440" = "y" ]; then
  define_bool CONFIG_4xx y
fi

if [ "$CONFIG_6xx" = "y" ]; then
  bool 'MPC8260 CPM Support' CONFIG_8260
fi

if [ "$CONFIG_POWER3" = "y" ]; then
  define_bool CONFIG_PPC64BRIDGE y
  define_bool CONFIG_ALL_PPC y
  define_bool CONFIG_PPC_ISATIMER y
fi

if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
  define_bool CONFIG_PPC64BRIDGE y
fi

if [ "$CONFIG_6xx" = "y" -o "$CONFIG_POWER3" = "y" ]; then
  define_bool CONFIG_PPC_STD_MMU y
else
  define_bool CONFIG_PPC_STD_MMU n
fi

if [ "$CONFIG_8260" = "y" ]; then
  define_bool CONFIG_SERIAL_CONSOLE y
  choice 'Machine Type'	\
	"EST8260	CONFIG_EST8260	\
	 SBS8260	CONFIG_SBS8260	\
	 RPXSUPER	CONFIG_RPX6	\
 	 TQM8260	CONFIG_TQM8260	\
	 Willow		CONFIG_WILLOW"	Willow
fi

if [ "$CONFIG_40x" = "y" ]; then
    choice 'Machine Type'			\
	"Arctic-II	CONFIG_ARCTIC2		\
	 Ash		CONFIG_ASH		\
	 Ceder		CONFIG_CEDER		\
	 Beech		CONFIG_BEECH		\
	 CPCI405	CONFIG_CPCI405 		\
	 EP405/EP405PC	CONFIG_EP405 		\
	 Oak		CONFIG_OAK 		\
	 Rainier	CONFIG_RAINIER		\
	 Redwood-4	CONFIG_REDWOOD_4 	\
	 Redwood-5	CONFIG_REDWOOD_5 	\
	 Redwood-6	CONFIG_REDWOOD_6 	\
	 Sycamore	CONFIG_SYCAMORE		\
	 Tivo		CONFIG_TIVO 		\
	 Walnut		CONFIG_WALNUT		\
	 Xilinx-ML300	CONFIG_XILINX_ML300"	Walnut

   if [ "$CONFIG_EP405" = "y" ]; then
      bool 'EP405PC Support' CONFIG_EP405PC
   fi  
fi

if [ "$CONFIG_440" = "y" ]; then
  define_bool CONFIG_BOOKE y
  define_bool CONFIG_NOT_COHERENT_CACHE y
  define_bool CONFIG_IBM_OCP y
  define_bool CONFIG_GEN550_KGDB y
  define_bool CONFIG_GEN550_PROGRESS y
  define_bool CONFIG_PIN_TLB y
  define_int CONFIG_IBM_OCP_MAL_CNT 1

    choice 'Machine Type' \
        "Ebony		CONFIG_EBONY" Ebony
fi

if [ "$CONFIG_8xx" = "y" ]; then
  define_bool CONFIG_SERIAL_CONSOLE y
  define_bool CONFIG_NOT_COHERENT_CACHE y

  choice 'Machine Type'		\
	"RPX-Lite	CONFIG_RPXLITE		\
	 RPX-Classic	CONFIG_RPXCLASSIC	\
	 BSE-IP		CONFIG_BSEIP		\
	 FADS		CONFIG_FADS		\
 	 TQM823L	CONFIG_TQM823L		\
 	 TQM850L	CONFIG_TQM850L		\
 	 TQM855L	CONFIG_TQM855L		\
  	 TQM860L	CONFIG_TQM860L		\
 	 FPS850L	CONFIG_FPS850L		\
 	 SPD823TS	CONFIG_SPD823TS		\
 	 IVMS8		CONFIG_IVMS8		\
	 IVML24		CONFIG_IVML24		\
 	 SM850		CONFIG_SM850		\
	 HERMES		CONFIG_HERMES_PRO	\
	 IP860		CONFIG_IP860		\
	 LWMON		CONFIG_LWMON		\
	 PCU_E		CONFIG_PCU_E		\
	 CCM		CONFIG_CCM		\
	 LANTEC		CONFIG_LANTEC		\
	 MBX		CONFIG_MBX		\
	 WinCept	CONFIG_WINCEPT"		RPX-Lite

  if [ "$CONFIG_TQM823L" = "y" -o \
       "$CONFIG_TQM850L" = "y" -o \
       "$CONFIG_FPS850L" = "y" -o \
       "$CONFIG_TQM855L" = "y" -o \
       "$CONFIG_TQM860L" = "y" -o \
       "$CONFIG_SM850"   = "y" ]; then
 	define_bool	CONFIG_TQM8xxL	y
  fi
fi

if [ "$CONFIG_6xx" = "y" -a "$CONFIG_8260" = "n" ]; then
  choice 'Machine Type'		\
	"CHRP/PowerMac/PReP	CONFIG_ALL_PPC		\
	 Amiga-APUS		CONFIG_APUS		\
	 Cogent-Willow		CONFIG_WILLOW		\
	 Force-PowerCore	CONFIG_PCORE		\
	 Force-PowerPMC250	CONFIG_POWERPMC250	\
	 Marvell-EV-64260-BP	CONFIG_EV64260		\
	 IBM-Spruce		CONFIG_SPRUCE		\
	 MEN-F1			CONFIG_MENF1		\
	 Motorola-LoPEC		CONFIG_LOPEC		\
	 Motorola-MCPN765	CONFIG_MCPN765		\
	 Motorola-MVME5100	CONFIG_MVME5100		\
         Motorola-PowerPlus     CONFIG_PPLUS            \
	 Motorola-PrPMC750	CONFIG_PRPMC750		\
	 Motorola-PrPMC800	CONFIG_PRPMC800		\
	 Motorola-Sandpoint	CONFIG_SANDPOINT	\
	 SBS-Adirondack		CONFIG_ADIR		\
	 SBS-K2			CONFIG_K2		\
	 SBS-Palomar4		CONFIG_PAL4		\
	 Synergy-Gemini		CONFIG_GEMINI		\
	 Zynx-ZX4500		CONFIG_ZX4500"		CHRP/PowerMac/PReP
fi

if [ "$CONFIG_PCORE" = "y" -o "$CONFIG_POWERPMC250" = "y" ]; then
  define_bool CONFIG_FORCE y
fi

if [ "$CONFIG_EV64260" = "y" ]; then
  define_bool CONFIG_GT64260 y
fi

if [ "$CONFIG_GT64260" = "y" ]; then
   mainmenu_option next_comment
   comment 'Marvell/Galileo GT64260 Options'

   dep_bool 'PCI Bus 0 Snooping Disable (experimental)' \
     CONFIG_GT64260_BUS_0_NOT_COHERENT $CONFIG_EXPERIMENTAL
   dep_bool 'PCI Bus 1 Snooping Disable (experimental)' \
     CONFIG_GT64260_BUS_1_NOT_COHERENT $CONFIG_EXPERIMENTAL

   if [ "$CONFIG_GT64260_BUS_0_NOT_COHERENT" = "y" \
     -o "$CONFIG_GT64260_BUS_1_NOT_COHERENT" = "y" ]; then
       define_bool CONFIG_NOT_COHERENT_CACHE y
   fi

   bool 'Board uses PPCBoot' CONFIG_USE_PPCBOOT
   if [ "$CONFIG_USE_PPCBOOT" = "y" ]; then
       hex 'Base Address assigned by Firmware' CONFIG_GT64260_ORIG_REG_BASE 0xf8000000
   else
       hex 'Base Address assigned by Firmware' CONFIG_GT64260_ORIG_REG_BASE 0x14000000

       bool 'Change Base Address in Bootloader' CONFIG_GT64260_NEW_BASE
       if [ "$CONFIG_GT64260_NEW_BASE" = "y" ]; then
	 hex 'New Base Address' CONFIG_GT64260_NEW_REG_BASE 0x14000000
       fi
   fi
   endmenu
fi

if [ "$CONFIG_FORCE" = "y" -o "$CONFIG_MENF1" = "y" \
	-o "$CONFIG_SANDPOINT" = "y" -o "$CONFIG_ZX4500" = "y" ]; then
  bool 'Enable MPC10x store gathering' CONFIG_MPC10X_STORE_GATHERING
fi

if [ "$CONFIG_K2" = "y" ]; then
  bool 'Enable CPC710 data gathering' CONFIG_CPC710_DATA_GATHERING
fi

if [ "$CONFIG_MVME5100" = "y" ]; then
  bool 'MVME5100 configured with an IPMC761' CONFIG_MVME5100_IPMC761_PRESENT
fi

if [ "$CONFIG_SANDPOINT" = "y" ]; then
  bool 'Sandpoint X3' CONFIG_SANDPOINT_X3
fi

if [ "$CONFIG_SANDPOINT_X3" = "y" ]; then
  define_bool CONFIG_EPIC_SERIAL_MODE y
fi

if [ "$CONFIG_LOPEC" = "y" ]; then
  define_bool CONFIG_EPIC_SERIAL_MODE y
  define_bool CONFIG_GEN550_KGDB y
  define_bool CONFIG_GEN550_PROGRESS y
fi

if [ "$CONFIG_PPC_STD_MMU" != "y" ]; then
  define_bool CONFIG_ALL_PPC n
fi

bool 'Symmetric multi-processing support' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
  bool '  Distribute interrupts on all CPUs by default' CONFIG_IRQ_ALL_CPUS
fi

if [ "$CONFIG_6xx" = "y" -a "$CONFIG_8260" = "n" ];then
  bool 'AltiVec Support' CONFIG_ALTIVEC
  bool 'Thermal Management Support' CONFIG_TAU
  if [ "$CONFIG_TAU" = "y" ]; then
    bool '    Interrupt driven TAU driver (DANGEROUS)' CONFIG_TAU_INT
    bool '    Average high and low temp' CONFIG_TAU_AVERAGE
  fi
  define_bool CONFIG_PPC_ISATIMER y
fi

if [ "$CONFIG_4xx" = "y" -o "$CONFIG_8xx" = "y" ]; then
  bool 'Math emulation' CONFIG_MATH_EMULATION
fi

if [ "$CONFIG_40x" = "y" ]; then
# It's often necessary to know the specific 4xx processor type.
# Fortunately, it is impled (so far) from the board type, so we
# don't need to ask more redundant questions.
 if [ "$CONFIG_ASH" = "y" ]; then
    define_bool CONFIG_NP405H y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_BIOS_FIXUP y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_CEDER" = "y" ]; then
    define_bool CONFIG_NP405L y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_CPCI405" = "y" ]; then
    define_bool CONFIG_405GP y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_EP405" = "y" ]; then
    define_bool CONFIG_405GP y
    define_bool CONFIG_BIOS_FIXUP y
    define_bool CONFIG_EMBEDDEDBOOT y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_RAINIER" = "y" ]; then
    define_bool CONFIG_NP405GS y
    define_bool CONFIG_EMBEDDEDBOOT y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_XILINX_ML300" = "y" ]; then
    define_bool CONFIG_VIRTEX_II_PRO y
    define_bool CONFIG_EMBEDDEDBOOT y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_XILINX_OCP y
  fi
  if [ "$CONFIG_OAK" = "y" -o "$CONFIG_TIVO" = "y" ]; then
    define_bool CONFIG_403GCX y
    define_bool CONFIG_IBM_OPENBIOS y
  fi
  if [ "$CONFIG_REDWOOD_4" = "y" -o "$CONFIG_REDWOOD_5" = "y" \
  	-o "$CONFIG_REDWOOD_6" = "y" ]; then
    define_bool CONFIG_STB03xxx y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_WALNUT" = "y" ]; then
    define_bool CONFIG_405GP y
    define_bool CONFIG_BIOS_FIXUP y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_BEECH" = "y" ]; then
    define_bool CONFIG_405LP y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_ARCTIC2" = "y" ]; then
    define_bool CONFIG_405LP y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
  if [ "$CONFIG_SYCAMORE" = "y" ]; then
    define_bool CONFIG_405GPR y
    define_bool CONFIG_BIOS_FIXUP y
    define_bool CONFIG_IBM_OPENBIOS y
    define_bool CONFIG_IBM405_ERR77 y
    define_bool CONFIG_IBM_OCP y
  fi
 
  dep_bool 'Power Management support (experimental)' CONFIG_PM $CONFIG_EXPERIMENTAL

  if [ "$CONFIG_40x" = "y" ]; then
    choice 'TTYS0 device and default console'	\
	"UART0  CONFIG_UART0_TTYS0		\
	 UART1	CONFIG_UART0_TTYS1"		UART0
  fi
 
  define_bool CONFIG_GEN550_KGDB y
  define_bool CONFIG_IBM405_ERR51 y
  define_bool CONFIG_NOT_COHERENT_CACHE y
fi

if [ "$CONFIG_4xx" = "y" ]; then
  bool 'PPC4xx DMA controller support' CONFIG_PPC4xx_DMA
  if [ "$CONFIG_PPC4xx_DMA" = "y" ]; then
    if [ "$CONFIG_405GP" = "y" -o "$CONFIG_NP405L" = "y"	\
	  -o "$CONFIG_NP405H" = "y" -o "$CONFIG_NP405GS" = "y"	\
          -o "$CONFIG_440" = "y" -o "$CONFIG_405LP" = "y" ]; then
      define_bool CONFIG_PPC4xx_EDMA y
    fi
    if [ "$CONFIG_STB03xxx" = "y" ]; then
      define_bool CONFIG_STBXXX_DMA y
    fi
  fi
  dep_bool 'OCP Device proc fs support (experimental)' CONFIG_OCP_PROC $CONFIG_IBM_OCP
fi

if [ "$CONFIG_8xx" = "y" -o "$CONFIG_8260" = "y" ]; then
    define_bool CONFIG_EMBEDDEDBOOT y
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'High memory support (experimental)' CONFIG_HIGHMEM
if [ "$CONFIG_ADVANCED_OPTIONS" = "y" ]; then
  if [ "$CONFIG_HIGHMEM" = "y" ]; then
    bool "  Set high memory pool address" CONFIG_HIGHMEM_START_BOOL
    if [ "$CONFIG_HIGHMEM_START_BOOL" = "y" ]; then
      hex "    Virtual start address of high memory pool" CONFIG_HIGHMEM_START 0xfe000000
    fi
    bool "  Set maximum low memory" CONFIG_LOWMEM_SIZE_BOOL
    if [ "$CONFIG_LOWMEM_SIZE_BOOL" = "y" ]; then
      hex "    Maximum low memory size (in bytes)" CONFIG_LOWMEM_SIZE 0x20000000
    fi
  fi

  bool "Set custom kernel base address" CONFIG_KERNEL_START_BOOL
  if [ "$CONFIG_KERNEL_START_BOOL" = "y" ]; then
    hex "  Virtual address of kernel base" CONFIG_KERNEL_START 0xc0000000
  fi
  bool "Set custom user task size" CONFIG_TASK_SIZE_BOOL
  if [ "$CONFIG_TASK_SIZE_BOOL" = "y" ]; then
    hex "  Size of user task space" CONFIG_TASK_SIZE 0x80000000
  fi
  if [ "$CONFIG_8xx" = "y" ]; then
    bool "Pinned Kernel TLBs (860 ONLY)" CONFIG_PIN_TLB
  fi
  if [ "$CONFIG_40x" = "y" ]; then
    bool "Pinned Kernel TLBs" CONFIG_PIN_TLB
  fi
fi

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Support for ISA-bus hardware' CONFIG_ISA
else
  define_bool CONFIG_ISA n
fi
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n

# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
define_bool CONFIG_MCA n

if [ "$CONFIG_4xx" = "y" -o "$CONFIG_8260" = "y" ]; then
  bool "Enable PCI" CONFIG_PCI
  bool 'PC PS/2 style Keyboard' CONFIG_PC_KEYBOARD
else
  if [ "$CONFIG_8xx" = "y" ]; then
     bool 'QSpan PCI' CONFIG_PCI_QSPAN
     define_bool CONFIG_PCI $CONFIG_PCI_QSPAN
  else
     if [ "$CONFIG_APUS" = "y" ]; then
       bool 'PCI for Permedia2' CONFIG_PCI_PERMEDIA
       define_bool CONFIG_PCI $CONFIG_PCI_PERMEDIA
     else
	if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
	   bool "IBM iSeries Native I/O Support" CONFIG_PCI_ISERIES
	   define_bool CONFIG_PCI $CONFIG_PCI_ISERIES
	else
	   define_bool CONFIG_PCI y
	fi
     fi
  fi
fi

bool 'Networking support' CONFIG_NET
bool 'Sysctl support' CONFIG_SYSCTL
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT

# only elf supported, a.out is not -- Cort
if [ "$CONFIG_PROC_FS" = "y" ]; then
  define_bool CONFIG_KCORE_ELF y
fi
define_bool CONFIG_BINFMT_ELF y
define_bool CONFIG_KERNEL_ELF y
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG

if [ "$CONFIG_HOTPLUG" = "y" ]; then
  source drivers/pcmcia/Config.in
else
  define_bool CONFIG_PCMCIA n
fi

source drivers/parport/Config.in

if [ "$CONFIG_PPC_ISERIES" != "y" ]; then
  if [ "$CONFIG_APUS" != "y" ]; then
    tristate 'Support for /dev/rtc' CONFIG_PPC_RTC
  else
    bool 'Generic /dev/rtc emulation' CONFIG_GEN_RTC
  fi
fi

if [ "$CONFIG_ALL_PPC" = "y" -a "$CONFIG_POWER3" = "n" ] ; then
  bool 'Workarounds for PPC601 bugs' CONFIG_PPC601_SYNC_FIX
fi

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Support for Open Firmware device tree in /proc' CONFIG_PROC_DEVICETREE
  bool 'Support for RTAS (RunTime Abstraction Services) in /proc' CONFIG_PPC_RTAS
  bool 'Support for PReP Residual Data' CONFIG_PREP_RESIDUAL
  dep_bool '  Support for reading of PReP Residual Data in /proc' CONFIG_PROC_PREPRESIDUAL $CONFIG_PREP_RESIDUAL
  define_bool CONFIG_PPCBUG_NVRAM y
fi
if [ "$CONFIG_PPLUS" = "y" -o "$CONFIG_LOPEC" = "y" ]; then
  bool 'Enable reading PPCBUG NVRAM during boot' CONFIG_PPCBUG_NVRAM
fi

bool 'Default bootloader kernel arguments' CONFIG_CMDLINE_BOOL
if [ "$CONFIG_CMDLINE_BOOL" = "y" ] ; then
  string 'Initial kernel command string' CONFIG_CMDLINE "console=ttyS0,9600 console=tty0 root=/dev/sda2"
fi

if [ "$CONFIG_APUS" = "y" ]; then
  define_bool CONFIG_FB_CONSOLE y
  define_bool CONFIG_AMIGA y
  define_bool CONFIG_ZORRO y
  define_bool CONFIG_AMIGAMOUSE y
  define_bool CONFIG_ABSTRACT_CONSOLE y
  define_bool CONFIG_FB y
  define_bool CONFIG_MOUSE y
  define_bool CONFIG_BUSMOUSE y
  define_bool CONFIG_APUS_FAST_EXCEPT y

  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool 'Amiga 1200/600 PCMCIA support' CONFIG_AMIGA_PCMCIA
  fi

  tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
  tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
  tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
  fi
  if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
    tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
    tristate 'PCMCIA NE2000 support' CONFIG_APNE
  fi
  if [ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o "$CONFIG_GVPIOEXT" = "y" -o \
       "$CONFIG_MULTIFACE_III_TTY" = "y" ]; then
    bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
  bool '/proc/hardware support' CONFIG_PROC_HARDWARE
  source drivers/zorro/Config.in
fi

endmenu
source drivers/mtd/Config.in
source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

source drivers/message/fusion/Config.in

source drivers/ieee1394/Config.in

source drivers/message/i2o/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
    if [ "$CONFIG_ATM" = "y" ]; then
      source drivers/atm/Config.in
    fi
  fi
  endmenu
fi

source net/ax25/Config.in

source net/irda/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Console drivers'
if [ "$CONFIG_40x" != "y" -a "$CONFIG_8xx" != "y" ]; then
  bool 'Support for VGA Console' CONFIG_VGA_CONSOLE
fi
 source drivers/video/Config.in
if [ "$CONFIG_FB" = "y" -a "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Backward compatibility mode for Xpmac' CONFIG_FB_COMPAT_XPMAC
fi
endmenu


if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
   mainmenu_option next_comment
   comment 'iSeries device drivers'
   tristate 'iSeries Virtual Console Support' CONFIG_VIOCONS
   tristate 'iSeries Virtual I/O disk support' CONFIG_VIODASD
   if [ "$CONFIG_VIODASD" = "y" -o "$CONFIG_VIODASD" = "m" ]; then
      bool 'iSeries Virtual disk IDE emulation' CONFIG_VIODASD_IDE
   fi
   tristate 'iSeries Virtual I/O CD support' CONFIG_VIOCD
   if [ "$CONFIG_VIOCD" = "y" -o "$CONFIG_VIOCD" = "m" ]; then
      bool 'iSeries Virtual CD Aztech emulation' CONFIG_VIOCD_AZTECH
   fi
   tristate 'iSeries Virtual Tape Support' CONFIG_VIOTAPE
   tristate 'iSeries Virtual Ethernet driver support' CONFIG_VETH
   if [ "$CONFIG_VIOCONS" != "n" -o "$CONFIG_VIODASD" != "n" \
	-o "$CONFIG_VIOTAPE" != "n" -o "$CONFIG_VIOCD" != "n" ]; then
      define_bool CONFIG_VIOPATH y
   fi
   endmenu
fi

if [ "$CONFIG_VIOCD" = "y" ]; then
   define_bool CONFIG_CD_NO_IDESCSI y
   define_bool CONFIG_BLK_DEV_IDECD y
fi

source drivers/input/Config.in

mainmenu_option next_comment
comment 'Macintosh device drivers'

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  bool 'Support for CUDA based PowerMacs' CONFIG_ADB_CUDA
  bool 'Support for PMU  based PowerMacs' CONFIG_ADB_PMU
  if [ "$CONFIG_ADB_PMU" = "y" ]; then
    bool '   Power management support for PowerBooks' CONFIG_PMAC_PBOOK
    if [ "$CONFIG_PMAC_PBOOK" = "y" ]; then
      define_bool CONFIG_PM y
      tristate '     APM emulation' CONFIG_PMAC_APM_EMU
    fi
    # made a separate option since backlight may end up beeing used
    # on non-powerbook machines (but only on PMU based ones AFAIK)
    bool '   Backlight control for LCD screens' CONFIG_PMAC_BACKLIGHT
  fi
  bool 'Support for PowerMac floppy' CONFIG_MAC_FLOPPY
  tristate 'Support for PowerMac serial ports' CONFIG_MAC_SERIAL
  if [ "$CONFIG_MAC_SERIAL" = "y" ]; then
    bool '   Support for console on serial port' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
  if [ "$CONFIG_ADB" = "y" ]; then
    bool '   Include MacIO (CHRP) ADB driver' CONFIG_ADB_MACIO
    dep_bool '   Use input layer for ADB devices' CONFIG_INPUT_ADBHID $CONFIG_INPUT
    if [ "$CONFIG_INPUT_ADBHID" = "y" ]; then
      bool '     Support for ADB raw keycodes' CONFIG_MAC_ADBKEYCODES
      bool '     Support for mouse button 2+3 emulation' CONFIG_MAC_EMUMOUSEBTN
    else
      bool '   Support for ADB keyboard (old driver)' CONFIG_ADB_KEYBOARD
    fi
  fi
  # This is for drivers/macintosh/mac_hid.o, which is needed if the input
  # layer is used.
  if [ "$CONFIG_INPUT" != "n" ]; then
    define_bool CONFIG_MAC_HID y
  fi
  if [ "$CONFIG_ADB_CUDA" != "n" ]; then
    bool 'Support for ANS LCD display' CONFIG_ANSLCD
  fi
fi
endmenu

source drivers/char/Config.in

source drivers/media/Config.in

source fs/Config.in

mainmenu_option next_comment
comment 'Sound'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/dmasound/Config.in
  source drivers/sound/Config.in
fi

endmenu

if [ "$CONFIG_8xx" = "y" ]; then
source arch/ppc/8xx_io/Config.in
fi

if [ "$CONFIG_8260" = "y" ]; then
source arch/ppc/8260_io/Config.in
fi

if [ "$CONFIG_40x" = "y" ]; then
  mainmenu_option next_comment
  comment 'IBM 4xx options'
  if [ "$CONFIG_STB03xxx" = "y" ]; then
    bool 'STB IR Keyboard' CONFIG_STB_KB
    bool 'SICC Serial port' CONFIG_SERIAL_SICC
    if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then
      define_bool CONFIG_UART1_DFLT_CONSOLE y	
      define_bool CONFIG_SERIAL_SICC_CONSOLE y
   fi
  fi
  endmenu
fi

source drivers/usb/Config.in

source net/bluetooth/Config.in

source lib/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
if [ "$CONFIG_DEBUG_KERNEL" = "y" ]; then
  bool '  Magic SysRq key' CONFIG_MAGIC_SYSRQ
  bool '  Debug high memory support' CONFIG_DEBUG_HIGHMEM
  bool '  Debug memory allocations' CONFIG_DEBUG_SLAB
  bool '  Memory mapped I/O debugging' CONFIG_DEBUG_IOVIRT
  bool '  Spinlock debugging' CONFIG_DEBUG_SPINLOCK
  bool '  Wait queue debugging' CONFIG_DEBUG_WAITQ
  bool '  Include kgdb kernel debugger' CONFIG_KGDB
  if [ "$CONFIG_KGDB" = "y" ]; then
    choice '    Serial Port'		\
	"ttyS0	CONFIG_KGDB_TTYS0	\
	 ttyS1	CONFIG_KGDB_TTYS1	\
	 ttyS2	CONFIG_KGDB_TTYS2	\
	 ttyS3	CONFIG_KGDB_TTYS3"	ttyS1
  fi
  bool '  Include xmon kernel debugger' CONFIG_XMON
  bool '  Include BDI-2000 user context switcher' CONFIG_BDI_SWITCH
  if [ "$CONFIG_KGDB" = "y" -o "$CONFIG_XMON" = "y" \
	-o "$CONFIG_BDI_SWITCH" = "y" ]; then
    bool '    Add any additional compile options' CONFIG_MORE_COMPILE_OPTIONS
    if [ "$CONFIG_MORE_COMPILE_OPTIONS" = "y" ]; then
      string '    Additional compile arguments' CONFIG_COMPILE_OPTIONS "-g -ggdb"
    fi
  fi
fi

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Support for early boot text console (BootX or OpenFirmware only)' CONFIG_BOOTX_TEXT
fi
if [ "$CONFIG_MCPN765" = "y" -o "$CONFIG_SANDPOINT" = "y" \
	-o "$CONFIG_ZX4500" = "y" -o "$CONFIG_PRPMC800" = "y" \
	-o "$CONFIG_4xx" = "y" -o "$CONFIG_GT64260" = "y" \
	-o "$CONFIG_LOPEC" = "y" -o "$CONFIG_PPLUS" = "y" ]; then
  bool 'Support for early boot texts over serial port' CONFIG_SERIAL_TEXT_DEBUG
fi
endmenu