libata: improve probe failure handling

[powerpc.git] / Documentation / md.txt

diff --git a/Documentation/md.txt b/Documentation/md.txt
index 9ae9e40..2202f5d 100644 (file)
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -62,7 +62,7 @@ be reconstructed (due to no parity).
 
 For this reason, md will normally refuse to start such an array.  This
 requires the sysadmin to take action to explicitly start the array
 
 For this reason, md will normally refuse to start such an array.  This
 requires the sysadmin to take action to explicitly start the array

-desipite possible corruption.  This is normally done with
+despite possible corruption.  This is normally done with

    mdadm --assemble --force ....
 
 This option is not really available if the array has the root
    mdadm --assemble --force ....
 
 This option is not really available if the array has the root


@@ -175,7 +175,7 @@ All md devices contain:
      raid levels that involve striping (1,4,5,6,10). The address space
      of the array is conceptually divided into chunks and consecutive
      chunks are striped onto neighbouring devices.
      raid levels that involve striping (1,4,5,6,10). The address space
      of the array is conceptually divided into chunks and consecutive
      chunks are striped onto neighbouring devices.

-     The size should be atleast PAGE_SIZE (4k) and should be a power
+     The size should be at least PAGE_SIZE (4k) and should be a power

      of 2.  This can only be set while assembling an array
 
   component_size
      of 2.  This can only be set while assembling an array
 
   component_size


@@ -214,8 +214,8 @@ All md devices contain:
    safe_mode_delay
      When an md array has seen no write requests for a certain period
      of time, it will be marked as 'clean'.  When another write
    safe_mode_delay
      When an md array has seen no write requests for a certain period
      of time, it will be marked as 'clean'.  When another write

-     request arrive, the array is marked as 'dirty' before the write
-     commenses.  This is known as 'safe_mode'.
+     request arrives, the array is marked as 'dirty' before the write
+     commences.  This is known as 'safe_mode'.

      The 'certain period' is controlled by this file which stores the
      period as a number of seconds.  The default is 200msec (0.200).
      Writing a value of 0 disables safemode.
      The 'certain period' is controlled by this file which stores the
      period as a number of seconds.  The default is 200msec (0.200).
      Writing a value of 0 disables safemode.


@@ -307,8 +307,8 @@ Each directory contains:
                         This applies only to raid1 arrays.
              spare    - device is working, but not a full member.
                         This includes spares that are in the process
                         This applies only to raid1 arrays.
              spare    - device is working, but not a full member.
                         This includes spares that are in the process

-                        of being recoverred to
-       This list make grow in future.
+                        of being recovered to
+       This list may grow in future.

        This can be written to.
        Writing "faulty"  simulates a failure on the device.
        Writing "remove" removes the device from the array.
        This can be written to.
        Writing "faulty"  simulates a failure on the device.
        Writing "remove" removes the device from the array.


@@ -330,7 +330,7 @@ Each directory contains:
         This gives the role that the device has in the array.  It will
        either be 'none' if the device is not active in the array
         (i.e. is a spare or has failed) or an integer less than the
         This gives the role that the device has in the array.  It will
        either be 'none' if the device is not active in the array
         (i.e. is a spare or has failed) or an integer less than the

-       'raid_disks' number for the array indicating which possition
+       'raid_disks' number for the array indicating which position

        it currently fills.  This can only be set while assembling an
        array.  A device for which this is set is assumed to be working.
 
        it currently fills.  This can only be set while assembling an
        array.  A device for which this is set is assumed to be working.
 


@@ -353,7 +353,7 @@ in the array.  These are named
 
     rdNN
 
 
     rdNN
 

-where 'NN' is the possition in the array, starting from 0.
+where 'NN' is the position in the array, starting from 0.

 So for a 3 drive array there will be rd0, rd1, rd2.
 These are symbolic links to the appropriate 'dev-XXX' entry.
 Thus, for example,
 So for a 3 drive array there will be rd0, rd1, rd2.
 These are symbolic links to the appropriate 'dev-XXX' entry.
 Thus, for example,