[TCP]: Document several sysctls.

[powerpc.git] / Documentation / usb / usb-serial.txt

diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index a2dee6e..d61f6e7 100644 (file)
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -13,7 +13,6 @@ CONFIGURATION
   Currently the driver can handle up to 256 different serial interfaces at
   one time. 
 
   Currently the driver can handle up to 256 different serial interfaces at
   one time. 
 

-  If you are not using devfs:

     The major number that the driver uses is 188 so to use the driver,
     create the following nodes:
        mknod /dev/ttyUSB0 c 188 0
     The major number that the driver uses is 188 so to use the driver,
     create the following nodes:
        mknod /dev/ttyUSB0 c 188 0


@@ -26,10 +25,6 @@ CONFIGURATION
        mknod /dev/ttyUSB254 c 188 254
        mknod /dev/ttyUSB255 c 188 255
 
        mknod /dev/ttyUSB254 c 188 254
        mknod /dev/ttyUSB255 c 188 255
 

-  If you are using devfs:
-    The devices supported by this driver will show up as
-    /dev/usb/tts/{0,1,...}
-

   When the device is connected and recognized by the driver, the driver
   will print to the system log, which node(s) the device has been bound
   to.
   When the device is connected and recognized by the driver, the driver
   will print to the system log, which node(s) the device has been bound
   to.


@@ -180,7 +175,7 @@ Keyspan USA-series Serial Adapters
   
   Current status:
     The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
   
   Current status:
     The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and

-    have been pretty throughly tested at various baud rates with 8-N-1
+    have been pretty thoroughly tested at various baud rates with 8-N-1

     character settings.  Other character lengths and parity setups are
     presently untested.
 
     character settings.  Other character lengths and parity setups are
     presently untested.
 


@@ -228,7 +223,7 @@ Cypress M8 CY4601 Family Serial Driver
                -Cypress HID->COM RS232 adapter
        
                Note: Cypress Semiconductor claims no affiliation with the
                -Cypress HID->COM RS232 adapter
        
                Note: Cypress Semiconductor claims no affiliation with the

-                       the hid->com device.
+                       hid->com device.

 
        Most devices using chipsets under the CY4601 family should
      work with the driver.  As long as they stay true to the CY4601
 
        Most devices using chipsets under the CY4601 family should
      work with the driver.  As long as they stay true to the CY4601


@@ -258,7 +253,7 @@ Cypress M8 CY4601 Family Serial Driver
        together without hacking the adapter to set the line high.
 
        The driver is smp safe.  Performance with the driver is rather low when using
        together without hacking the adapter to set the line high.
 
        The driver is smp safe.  Performance with the driver is rather low when using

-       it for transfering files.  This is being worked on, but I would be willing to
+       it for transferring files.  This is being worked on, but I would be willing to

        accept patches.  An urb queue or packet buffer would likely fit the bill here.
 
        If you have any questions, problems, patches, feature requests, etc. you can
        accept patches.  An urb queue or packet buffer would likely fit the bill here.
 
        If you have any questions, problems, patches, feature requests, etc. you can


@@ -277,7 +272,7 @@ Digi AccelePort Driver
   work under SMP with the uhci driver.
 
   The driver is generally working, though we still have a few more ioctls
   work under SMP with the uhci driver.
 
   The driver is generally working, though we still have a few more ioctls

-  to implement and final testing and debugging to do.  The paralled port
+  to implement and final testing and debugging to do.  The parallel port

   on the USB 2 is supported as a serial to parallel converter; in other
   words, it appears as another USB serial port on Linux, even though
   physically it is really a parallel port.  The Digi Acceleport USB 8
   on the USB 2 is supported as a serial to parallel converter; in other
   words, it appears as another USB serial port on Linux, even though
   physically it is really a parallel port.  The Digi Acceleport USB 8


@@ -302,7 +297,7 @@ Belkin USB Serial Adapter F5U103
       Parity       N,E,O,M,S
       Handshake    None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
       Break        Set and clear
       Parity       N,E,O,M,S
       Handshake    None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
       Break        Set and clear

-      Line contrl  Input/Output query and control **
+      Line control Input/Output query and control **

 
       *  Hardware input flow control is only enabled for firmware
          levels above 2.06.  Read source code comments describing Belkin
 
       *  Hardware input flow control is only enabled for firmware
          levels above 2.06.  Read source code comments describing Belkin


@@ -314,7 +309,7 @@ Belkin USB Serial Adapter F5U103
          automatic hardware flow control.
 
   TO DO List:
          automatic hardware flow control.
 
   TO DO List:

-    -- Add true modem contol line query capability.  Currently tracks the
+    -- Add true modem control line query capability.  Currently tracks the

        states reported by the interrupt and the states requested.
     -- Add error reporting back to application for UART error conditions.
     -- Add support for flush ioctls.
        states reported by the interrupt and the states requested.
     -- Add error reporting back to application for UART error conditions.
     -- Add support for flush ioctls.


@@ -427,18 +422,12 @@ Options supported:
   debug                        - extra verbose debugging info
                          (default: 0; nonzero enables)
   use_lowlatency       - use low_latency flag to speed up tty layer
   debug                        - extra verbose debugging info
                          (default: 0; nonzero enables)
   use_lowlatency       - use low_latency flag to speed up tty layer

-                         when reading from from the device.
+                         when reading from the device.

                          (default: 0; nonzero enables)
 
   See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
   information on this driver.
 
                          (default: 0; nonzero enables)
 
   See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
   information on this driver.
 

-AIRcable USB Dongle Bluetooth driver
-  If there is the cdc_acm driver loaded in the system, you will find that the
-  cdc_acm claims the device before AIRcable can. This is simply corrected
-  by unloading both modules and then loading the aircable module before
-  cdc_acm module
-

 Generic Serial driver
 
   If your device is not one of the above listed devices, compatible with
 Generic Serial driver
 
   If your device is not one of the above listed devices, compatible with