[SPARC64]: Kill pci_controller->pbms_same_domain

[powerpc.git] / arch / powerpc / Kconfig.debug

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 9254806..d39d133 100644 (file)
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -4,20 +4,34 @@ source "lib/Kconfig.debug"
 
 config DEBUG_STACKOVERFLOW
        bool "Check for stack overflows"
 
 config DEBUG_STACKOVERFLOW
        bool "Check for stack overflows"

-       depends on DEBUG_KERNEL && PPC64
+       depends on DEBUG_KERNEL

        help
          This option will cause messages to be printed if free stack space
          drops below a certain limit.
 
 config DEBUG_STACK_USAGE
        bool "Stack utilization instrumentation"
        help
          This option will cause messages to be printed if free stack space
          drops below a certain limit.
 
 config DEBUG_STACK_USAGE
        bool "Stack utilization instrumentation"

-       depends on DEBUG_KERNEL && PPC64
+       depends on DEBUG_KERNEL

        help
          Enables the display of the minimum amount of free stack which each
          task has ever had available in the sysrq-T and sysrq-P debug output.
 
          This option will slow down process creation somewhat.
 
        help
          Enables the display of the minimum amount of free stack which each
          task has ever had available in the sysrq-T and sysrq-P debug output.
 
          This option will slow down process creation somewhat.
 

+config HCALL_STATS
+       bool "Hypervisor call instrumentation"
+       depends on PPC_PSERIES && DEBUG_FS
+       help
+         Adds code to keep track of the number of hypervisor calls made and
+         the amount of time spent in hypervisor callsr.  Wall time spent in
+         each call is always calculated, and if available CPU cycles spent
+         are also calculated.  A directory named hcall_inst is added at the
+         root of the debugfs filesystem.  Within the hcall_inst directory
+         are files that contain CPU specific call statistics.
+
+         This option will add a small amount of overhead to all hypervisor
+         calls.
+

 config DEBUGGER
        bool "Enable debugger hooks"
        depends on DEBUG_KERNEL
 config DEBUGGER
        bool "Enable debugger hooks"
        depends on DEBUG_KERNEL


@@ -63,7 +77,7 @@ config KGDB_CONSOLE
 
 config XMON
        bool "Include xmon kernel debugger"
 
 config XMON
        bool "Include xmon kernel debugger"

-       depends on DEBUGGER && !PPC_ISERIES
+       depends on DEBUGGER

        help
          Include in-kernel hooks for the xmon kernel monitor/debugger.
          Unless you are intending to debug the kernel, say N here.
        help
          Include in-kernel hooks for the xmon kernel monitor/debugger.
          Unless you are intending to debug the kernel, say N here.


@@ -74,6 +88,8 @@ config XMON
          very early during boot. 'xmon=on' will just enable the xmon
          debugger hooks.  'xmon=off' will disable the debugger hooks
          if CONFIG_XMON_DEFAULT is set.
          very early during boot. 'xmon=on' will just enable the xmon
          debugger hooks.  'xmon=off' will disable the debugger hooks
          if CONFIG_XMON_DEFAULT is set.

+         xmon will print a backtrace on the very first invocation.
+         'xmon=nobt' will disable this autobacktrace.

 
 config XMON_DEFAULT
        bool "Enable xmon by default"
 
 config XMON_DEFAULT
        bool "Enable xmon by default"


@@ -82,6 +98,15 @@ config XMON_DEFAULT
          xmon is normally disabled unless booted with 'xmon=on'.
          Use 'xmon=off' to disable xmon init during runtime.
 
          xmon is normally disabled unless booted with 'xmon=on'.
          Use 'xmon=off' to disable xmon init during runtime.
 

+config XMON_DISASSEMBLY
+       bool "Include disassembly support in xmon"
+       depends on XMON
+       default y
+       help
+         Include support for disassembling in xmon. You probably want
+         to say Y here, unless you're building for a memory-constrained
+         system.
+

 config IRQSTACKS
        bool "Use separate kernel stacks when processing interrupts"
        depends on PPC64
 config IRQSTACKS
        bool "Use separate kernel stacks when processing interrupts"
        depends on PPC64


@@ -100,7 +125,7 @@ config BDI_SWITCH
 
 config BOOTX_TEXT
        bool "Support for early boot text console (BootX or OpenFirmware only)"
 
 config BOOTX_TEXT
        bool "Support for early boot text console (BootX or OpenFirmware only)"

-       depends PPC_OF && !PPC_ISERIES
+       depends PPC_OF

        help
          Say Y here to see progress messages from the boot firmware in text
          mode. Requires either BootX or Open Firmware.
        help
          Say Y here to see progress messages from the boot firmware in text
          mode. Requires either BootX or Open Firmware.


@@ -110,18 +135,16 @@ config SERIAL_TEXT_DEBUG
        depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
                PPC_GEN550 || PPC_MPC52xx
 
        depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
                PPC_GEN550 || PPC_MPC52xx
 

-config PPC_OCP
-       bool
-       depends on IBM_OCP || XILINX_OCP
-       default y
+config PPC_EARLY_DEBUG
+       bool "Early debugging (dangerous)"

 
 choice
 
 choice

-       prompt "Early debugging (dangerous)"
-       bool
-       optional
+       prompt "Early debugging console"
+       depends on PPC_EARLY_DEBUG

        help
        help

-         Enable early debugging. Careful, if you enable debugging for the
-         wrong type of machine your kernel _will not boot_.
+         Use the selected console for early debugging. Careful, if you
+         enable debugging for the wrong type of machine your kernel
+         _will not boot_.

 
 config PPC_EARLY_DEBUG_LPAR
        bool "LPAR HV Console"
 
 config PPC_EARLY_DEBUG_LPAR
        bool "LPAR HV Console"


@@ -136,12 +159,19 @@ config PPC_EARLY_DEBUG_G5
        help
          Select this to enable early debugging for Apple G5 machines.
 
        help
          Select this to enable early debugging for Apple G5 machines.
 

-config PPC_EARLY_DEBUG_RTAS
+config PPC_EARLY_DEBUG_RTAS_PANEL

        bool "RTAS Panel"
        depends on PPC_RTAS
        help
          Select this to enable early debugging via the RTAS panel.
 
        bool "RTAS Panel"
        depends on PPC_RTAS
        help
          Select this to enable early debugging via the RTAS panel.
 

+config PPC_EARLY_DEBUG_RTAS_CONSOLE
+       bool "RTAS Console"
+       depends on PPC_RTAS
+       select UDBG_RTAS_CONSOLE
+       help
+         Select this to enable early debugging via the RTAS console.
+

 config PPC_EARLY_DEBUG_MAPLE
        bool "Maple real mode"
        depends on PPC_MAPLE
 config PPC_EARLY_DEBUG_MAPLE
        bool "Maple real mode"
        depends on PPC_MAPLE


@@ -155,6 +185,20 @@ config PPC_EARLY_DEBUG_ISERIES
          Select this to enable early debugging for legacy iSeries. You need
          to hit "Ctrl-x Ctrl-x" to see the messages on the console.
 
          Select this to enable early debugging for legacy iSeries. You need
          to hit "Ctrl-x Ctrl-x" to see the messages on the console.
 

+config PPC_EARLY_DEBUG_PAS_REALMODE
+       bool "PA Semi real mode"
+       depends on PPC_PASEMI
+       help
+         Select this to enable early debugging for PA Semi.
+         Output will be on UART0.
+
+config PPC_EARLY_DEBUG_BEAT
+       bool "Beat HV Console"
+       depends on PPC_CELLEB
+       select PPC_UDBG_BEAT
+       help
+         Select this to enable early debugging for Celleb with Beat.
+

 endchoice
 
 endmenu
 endchoice
 
 endmenu