- def I2Csetup(self):
- """Move the FET into the I2C application."""
- self.writecmd(0x02,0x10,0,self.data); #SPI/SETUP
- def I2Cstart(self):
- """Start an I2C transaction."""
- self.writecmd(0x02,0x20,0,self.data); #SPI/SETUP
- def I2Cstop(self):
- """Stop an I2C transaction."""
- self.writecmd(0x02,0x21,0,self.data); #SPI/SETUP
- def I2Cread(self,len=1):
- """Read len bytes by I2C."""
- self.writecmd(0x02,0x00,1,[len]); #SPI/SETUP
- return self.data;
- def I2Cwrite(self,bytes):
- """Write bytes by I2C."""
- self.writecmd(0x02,0x01,len(bytes),bytes); #SPI/SETUP
- return ord(self.data[0]);
-class GoodFETCC(GoodFET):
- """A GoodFET variant for use with Chipcon 8051 Zigbe SoC."""
- def CChaltcpu(self):
- """Halt the CPU."""
- self.writecmd(0x30,0x86,0,self.data);
- def CCreleasecpu(self):
- """Resume the CPU."""
- self.writecmd(0x30,0x87,0,self.data);
- def CCtest(self):
- self.CCreleasecpu();
- self.CChaltcpu();
- #print "Status: %s" % self.CCstatusstr();
-
- #Grab ident three times, should be equal.
- ident1=self.CCident();
- ident2=self.CCident();
- ident3=self.CCident();
- if(ident1!=ident2 or ident2!=ident3):
- print "Error, repeated ident attempts unequal."
- print "%04x, %04x, %04x" % (ident1, ident2, ident3);
-
- #Single step, printing PC.
- print "Tracing execution at startup."
- for i in range(1,15):
- pc=self.CCgetPC();
- byte=self.CCpeekcodebyte(i);
- #print "PC=%04x, %02x" % (pc, byte);
- self.CCstep_instr();
-
- print "Verifying that debugging a NOP doesn't affect the PC."
- for i in range(1,15):
- pc=self.CCgetPC();
- self.CCdebuginstr([0x00]);
- if(pc!=self.CCgetPC()):
- print "ERROR: PC changed during CCdebuginstr([NOP])!";
-
-
- #print "Status: %s." % self.CCstatusstr();
- #Exit debugger
- self.CCstop();
- print "Done.";
-
- def CCsetup(self):
- """Move the FET into the CC2430/CC2530 application."""
- #print "Initializing Chipcon.";
- self.writecmd(0x30,0x10,0,self.data);
- def CCrd_config(self):
- """Read the config register of a Chipcon."""
- self.writecmd(0x30,0x82,0,self.data);
- return ord(self.data[0]);
- def CCwr_config(self,config):
- """Write the config register of a Chipcon."""
- self.writecmd(0x30,0x81,1,[config&0xFF]);
-
- CCversions={0x0100:"CC1110",
- 0x8500:"CC2430",
- 0x8900:"CC2431",
- 0x8100:"CC2510",
- 0x9100:"CC2511",
- 0xFF00:"CCmissing"};
- def CCidentstr(self):
- ident=self.CCident();
- chip=self.CCversions.get(ident&0xFF00);
- return "%s/r%02x" % (chip, ident&0xFF);
- def CCident(self):
- """Get a chipcon's ID."""
- self.writecmd(0x30,0x8B,0,None);
- chip=ord(self.data[0]);
- rev=ord(self.data[1]);
- return (chip<<8)+rev;
- def CCgetPC(self):
- """Get a chipcon's PC."""
- self.writecmd(0x30,0x83,0,None);
- hi=ord(self.data[0]);
- lo=ord(self.data[1]);
- return (hi<<8)+lo;
- def CCdebuginstr(self,instr):
- self.writecmd(0x30,0x88,len(instr),instr);
- return ord(self.data[0]);
- def CCpeekcodebyte(self,adr):
- """Read the contents of code memory at an address."""
- self.data=[adr&0xff, (adr&0xff00)>>8];
- self.writecmd(0x30,0x90,2,self.data);
- return ord(self.data[0]);
- def CCpeekdatabyte(self,adr):
- """Read the contents of data memory at an address."""
- self.data=[adr&0xff, (adr&0xff00)>>8];
- self.writecmd(0x30,0x91, 2, self.data);
- return ord(self.data[0]);
- def CCpokedatabyte(self,adr,val):
- """Write a byte to data memory."""
- self.data=[adr&0xff, (adr&0xff00)>>8, val];
- self.writecmd(0x30, 0x92, 3, self.data);
- return ord(self.data[0]);
- def CCchiperase(self):
- """Erase all of the target's memory."""
- self.writecmd(0x30,0x80,0,None);
- def CCstatus(self):
- """Check the status."""
- self.writecmd(0x30,0x84,0,None);
- return ord(self.data[0])
- CCstatusbits={0x80 : "erased",
- 0x40 : "pcon_idle",
- 0x20 : "halted",
- 0x10 : "pm0",
- 0x08 : "halted",
- 0x04 : "locked",
- 0x02 : "oscstable",
- 0x01 : "overflow"};
- def CCstatusstr(self):
- """Check the status as a string."""
- status=self.CCstatus();
- str="";
- i=1;
- while i<0x100:
- if(status&i):
- str="%s %s" %(self.CCstatusbits[i],str);
- i*=2;
- return str;
- def CCstart(self):
- """Start debugging."""
- self.writecmd(0x30,0x20,0,self.data);
- ident=self.CCidentstr();
- print "Target identifies as %s." % ident;
- #print "Status: %s." % self.CCstatusstr();
- self.CCreleasecpu();
- self.CChaltcpu();
- #print "Status: %s." % self.CCstatusstr();
-
- def CCstop(self):
- """Stop debugging."""
- self.writecmd(0x30,0x21,0,self.data);
- def CCstep_instr(self):
- """Step one instruction."""
- self.writecmd(0x30,0x89,0,self.data);
-