devres: release resources on device_del()

[powerpc.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23334c8..7e54e48 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
          controller and a chipselect.  Most SPI slaves don't support
          dynamic device discovery; some are even write-only or read-only.
 
          controller and a chipselect.  Most SPI slaves don't support
          dynamic device discovery; some are even write-only or read-only.
 

-         SPI is widely used by microcontollers to talk with sensors,
+         SPI is widely used by microcontrollers to talk with sensors,

          eeprom and flash memory, codecs and various other controller
          chips, analog to digital (and d-to-a) converters, and more.
          MMC and SD cards can be accessed using SPI protocol; and for
          eeprom and flash memory, codecs and various other controller
          chips, analog to digital (and d-to-a) converters, and more.
          MMC and SD cards can be accessed using SPI protocol; and for


@@ -51,6 +51,13 @@ config SPI_MASTER
 comment "SPI Master Controller Drivers"
        depends on SPI_MASTER
 
 comment "SPI Master Controller Drivers"
        depends on SPI_MASTER
 

+config SPI_ATMEL
+       tristate "Atmel SPI Controller"
+       depends on (ARCH_AT91 || AVR32) && SPI_MASTER
+       help
+         This selects a driver for the Atmel SPI Controller, present on
+         many AT32 (AVR32) and AT91 (ARM) chips.
+

 config SPI_BITBANG
        tristate "Bitbanging SPI master"
        depends on SPI_MASTER && EXPERIMENTAL
 config SPI_BITBANG
        tristate "Bitbanging SPI master"
        depends on SPI_MASTER && EXPERIMENTAL


@@ -75,6 +82,13 @@ config SPI_BUTTERFLY
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
 
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
 

+config SPI_IMX
+       tristate "Freescale iMX SPI controller"
+       depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+       help
+         This enables using the Freescale iMX SPI controller in master
+         mode.
+

 config SPI_MPC83xx
        tristate "Freescale MPC83xx SPI controller"
        depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
 config SPI_MPC83xx
        tristate "Freescale MPC83xx SPI controller"
        depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL


@@ -87,6 +101,14 @@ config SPI_MPC83xx
          family of PowerPC processors.  The MPC83xx uses a simple set of shift
          registers for data (opposed to the CPM based descriptor model).
 
          family of PowerPC processors.  The MPC83xx uses a simple set of shift
          registers for data (opposed to the CPM based descriptor model).
 

+config SPI_OMAP_UWIRE
+       tristate "OMAP1 MicroWire"
+       depends on SPI_MASTER && ARCH_OMAP1
+       select SPI_BITBANG
+       help
+         This hooks up to the MicroWire controller on OMAP1 chips.
+
+

 config SPI_PXA2XX
        tristate "PXA2xx SSP SPI master"
        depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
 config SPI_PXA2XX
        tristate "PXA2xx SSP SPI master"
        depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL


@@ -95,6 +117,12 @@ config SPI_PXA2XX
          The driver can be configured to use any SSP port and additional
          documentation can be found a Documentation/spi/pxa2xx.
 
          The driver can be configured to use any SSP port and additional
          documentation can be found a Documentation/spi/pxa2xx.
 

+config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+       help
+         SPI driver for Samsung S3C24XX series ARM SoCs
+

 config SPI_S3C24XX_GPIO
        tristate "Samsung S3C24XX series SPI by GPIO"
        depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
 config SPI_S3C24XX_GPIO
        tristate "Samsung S3C24XX series SPI by GPIO"
        depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL


@@ -107,13 +135,6 @@ config SPI_S3C24XX_GPIO
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 # Add new SPI master controllers in alphabetical order above this line
 #
 

-
-config SPI_S3C24XX
-       tristate "Samsung S3C24XX series SPI"
-       depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
-       help
-         SPI driver for Samsung S3C24XX series ARM SoCs
-

 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.


@@ -121,6 +142,16 @@ config SPI_S3C24XX
 comment "SPI Protocol Masters"
        depends on SPI_MASTER
 
 comment "SPI Protocol Masters"
        depends on SPI_MASTER
 

+config SPI_AT25
+       tristate "SPI EEPROMs from most vendors"
+       depends on SPI_MASTER && SYSFS
+       help
+         Enable this driver to get read/write support to most SPI EEPROMs,
+         after you configure the board init code to know about each eeprom
+         on your target board.
+
+         This driver can also be built as a module.  If so, the module
+         will be called at25.

 
 #
 # Add new SPI protocol masters in alphabetical order above this line
 
 #
 # Add new SPI protocol masters in alphabetical order above this line