---------------------------
-What: drivers that were depending on OBSOLETE_OSS_DRIVER
- (config options already removed)
-When: before 2.6.19
-Why: OSS drivers with ALSA replacements
-Who: Adrian Bunk <bunk@stusta.de>
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: June 2007
+Why: Deprecated in favour of the more efficient and robust rawiso interface.
+ Affected are applications which use the deprecated part of libraw1394
+ (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
+ raw1394_stop_iso_rcv) or bypass libraw1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
-What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: November 2006
-Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
- more efficient. You should really be using libraw1394 for raw1394
- access anyway.
-Who: Jody McIntyre <scjody@modernduck.com>
+What: dv1394 driver (CONFIG_IEEE1394_DV1394)
+When: June 2007
+Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
+ shift of application support has been indicated on www.linux1394.org
+ and developers' mailinglists for quite some time. Major applications
+ have been converted, with the exception of ffmpeg and hence xine.
+ Piped output of dvgrab2 is a partial equivalent to dv1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
+What: ieee1394 core's unused exports (CONFIG_IEEE1394_EXPORT_FULL_API)
+When: January 2007
+Why: There are no projects known to use these exported symbols, except
+ dfg1394 (uses one symbol whose functionality is core-internal now).
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
+What: ieee1394's *_oui sysfs attributes (CONFIG_IEEE1394_OUI_DB)
+When: January 2007
+Files: drivers/ieee1394/: oui.db, oui2c.sh
+Why: big size, little value
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
---------------------------
-What: sys_sysctl
-When: January 2007
-Why: The same information is available through /proc/sys and that is the
- interface user space prefers to use. And there do not appear to be
- any existing user in user space of sys_sysctl. The additional
- maintenance overhead of keeping a set of binary names gets
- in the way of doing a good job of maintaining this interface.
-
-Who: Eric Biederman <ebiederm@xmission.com>
-
----------------------------
-
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
---------------------------
-What: ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)
-When: December 2005
-Why: This interface has been obsoleted by the new layer3-independent
- "nfnetlink_queue". The Kernel interface is compatible, so the old
- ip[6]tables "QUEUE" targets still work and will transparently handle
- all packets into nfnetlink queue number 0. Userspace users will have
- to link against API-compatible library on top of libnfnetlink_queue
- instead of the current 'libipq'.
-Who: Harald Welte <laforge@netfilter.org>
-
----------------------------
-
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
---------------------------
-What: START_ARRAY ioctl for md
-When: July 2006
-Files: drivers/md/md.c
-Why: Not reliable by design - can fail when most needed.
- Alternatives exist
-Who: NeilBrown <neilb@suse.de>
-
----------------------------
-
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
---------------------------
-What: I2C interface of the it87 driver
-When: January 2007
-Why: The ISA interface is faster and should be always available. The I2C
- probing is also known to cause trouble in at least one case (see
- bug #5889.)
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: Febuary 2008
+When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
Why: The USB subsystem has changed a lot over time, and it has been
possible to create userspace USB drivers using usbfs/libusb/gadgetfs
---------------------------
-What: Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
-When: September 2006
-Why: Does no longer build since quite some time, and was never popular,
- due to the platform being replaced by successor models. Apparently
- no user base left. It also is one of the last users of
- WANT_PAGE_VIRTUAL.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: Support for the Momentum Ocelot, Ocelot 3, Ocelot C and Ocelot G
-When: September 2006
-Why: Some do no longer build and apparently there is no user base left
- for these platforms.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: October 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
---------------------------
-What: Support for MIPS Technologies' Altas and SEAD evaluation board
-When: September 2006
-Why: Some do no longer build and apparently there is no user base left
- for these platforms. Hardware out of production since several years.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: i2c-isa
+When: December 2006
+Why: i2c-isa is a non-sense and doesn't fit in the device driver
+ model. Drivers relying on it are better implemented as platform
+ drivers.
+Who: Jean Delvare <khali@linux-fr.org>
---------------------------
-What: Support for the IT8172-based platforms, ITE 8172G and Globespan IVR
-When: September 2006
-Why: Code does no longer build since at least 2.6.0, apparently there is
- no user base left for these platforms. Hardware out of production
- since several years and hardly a trace of the manufacturer left on
- the net.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: i2c_adapter.dev
+ i2c_adapter.list
+When: July 2007
+Why: Superfluous, given i2c_adapter.class_dev:
+ * The "dev" was a stand-in for the physical device node that legacy
+ drivers would not have; but now it's almost always present. Any
+ remaining legacy drivers must upgrade (they now trigger warnings).
+ * The "list" duplicates class device children.
+ The delay in removing this is so upgraded lm_sensors and libsensors
+ can get deployed. (Removal causes minor changes in the sysfs layout,
+ notably the location of the adapter type name and parenting the i2c
+ client hardware directly from their controller.)
+Who: Jean Delvare <khali@linux-fr.org>,
+ David Brownell <dbrownell@users.sourceforge.net>
+
+---------------------------
+
+What: IPv4 only connection tracking/NAT/helpers
+When: 2.6.22
+Why: The new layer 3 independant connection tracking replaces the old
+ IPv4 only version. After some stabilization of the new code the
+ old one will be removed.
+Who: Patrick McHardy <kaber@trash.net>
---------------------------
-What: Interrupt only SA_* flags
-When: Januar 2007
-Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
- out of the signal namespace.
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
-Who: Thomas Gleixner <tglx@linutronix.de>
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
+What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
+When: 2.6.21
+Why: hotkey.c was an attempt to consolidate multiple drivers that use
+ ACPI to implement hotkeys. However, hotkeys are not documented
+ in the ACPI specification, so the drivers used undocumented
+ vendor-specific hooks and turned out to be more different than
+ the same.
----------------------------
+ Further, the keys and the features supplied by each platform
+ are different, so there will always be a need for
+ platform-specific drivers.
-What: Bridge netfilter deferred IPv4/IPv6 output hook calling
-When: January 2007
-Why: The deferred output hooks are a layering violation causing unusual
- and broken behaviour on bridge devices. Examples of things they
- break include QoS classifation using the MARK or CLASSIFY targets,
- the IPsec policy match and connection tracking with VLANs on a
- bridge. Their only use is to enable bridge output port filtering
- within iptables with the physdev match, which can also be done by
- combining iptables and ebtables using netfilter marks. Until it
- will get removed the hook deferral is disabled by default and is
- only enabled when needed.
+ So the new plan is to delete hotkey.c and instead, work on the
+ platform specific drivers to try to make them look the same
+ to the user when they supply the same features.
-Who: Patrick McHardy <kaber@trash.net>
-
----------------------------
+ hotkey.c has always depended on CONFIG_EXPERIMENTAL
-What: frame diverter
-When: November 2006
-Why: The frame diverter is included in most distribution kernels, but is
- broken. It does not correctly handle many things:
- - IPV6
- - non-linear skb's
- - network device RCU on removal
- - input frames not correctly checked for protocol errors
- It also adds allocation overhead even if not enabled.
- It is not clear if anyone is still using it.
-Who: Stephen Hemminger <shemminger@osdl.org>
+Who: Len Brown <len.brown@intel.com>
---------------------------
+What: /sys/firmware/acpi/namespace
+When: 2.6.21
+Why: The ACPI namespace is effectively the symbol list for
+ the BIOS. The device names are completely arbitrary
+ and have no place being exposed to user-space.
-What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
-When: Oktober 2008
-Why: The stacking of class devices makes these values misleading and
- inconsistent.
- Class devices should not carry any of these properties, and bus
- devices have SUBSYTEM and DRIVER as a replacement.
-Who: Kay Sievers <kay.sievers@suse.de>
+ For those interested in the BIOS ACPI namespace,
+ the BIOS can be extracted and disassembled with acpidump
+ and iasl as documented in the pmtools package here:
+ http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
+
+Who: Len Brown <len.brown@intel.com>
---------------------------
-What: i2c-isa
-When: December 2006
-Why: i2c-isa is a non-sense and doesn't fit in the device driver
- model. Drivers relying on it are better implemented as platform
- drivers.
-Who: Jean Delvare <khali@linux-fr.org>
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
---------------------------
-What: ftape
-When: 2.6.20
-Why: Orphaned for ages. SMP bugs long unfixed. Few users left
- in the world.
+What: JFFS (version 1)
+When: 2.6.21
+Why: Unmaintained for years, superceded by JFFS2 for years.
Who: Jeff Garzik <jeff@garzik.org>
---------------------------
projects / powerpc.git / blobdiff