Merge the easy part of the IOP branch

[powerpc.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f9362ee..2c32c87 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -74,6 +74,14 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
        bool
 
+config ARCH_HAS_ILOG2_U32
+       bool
+       default n
+
+config ARCH_HAS_ILOG2_U64
+       bool
+       default n
+
 config GENERIC_HWEIGHT
        bool
        default y
@@ -223,6 +231,14 @@ config ARCH_IOP33X
        help
          Support for Intel's IOP33X (XScale) family of processors.
 
+config ARCH_IOP13XX
+       bool "IOP13xx-based"
+       depends on MMU
+       select PLAT_IOP
+       select PCI
+       help
+         Support for Intel's IOP13XX (XScale) family of processors.
+
 config ARCH_IXP4XX
        bool "IXP4xx-based"
        depends on MMU
@@ -257,6 +273,14 @@ config ARCH_L7200
          If you have any questions or comments about the Linux kernel port
          to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_NS9XXX
+       bool "NetSilicon NS9xxx"
+       help
+         Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+         System.
+
+         <http://www.digi.com/products/microprocessors/index.jsp>
+
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
        help
@@ -266,6 +290,7 @@ config ARCH_PXA
        bool "PXA2xx-based"
        depends on MMU
        select ARCH_MTD_XIP
+       select GENERIC_TIME
        help
          Support for Intel's PXA2XX processor line.
 
@@ -289,7 +314,7 @@ config ARCH_SA1100
          Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-       bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+       bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
        help
          Samsung S3C2410X CPU based systems, such as the Simtec Electronics
          BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -331,6 +356,8 @@ source "arch/arm/mach-iop32x/Kconfig"
 
 source "arch/arm/mach-iop33x/Kconfig"
 
+source "arch/arm/mach-iop13xx/Kconfig"
+
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-ixp2000/Kconfig"
@@ -347,7 +374,16 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
@@ -361,10 +397,12 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
+source "arch/arm/mach-ns9xxx/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
        bool
@@ -374,6 +412,14 @@ config PLAT_IOP
 
 source arch/arm/mm/Kconfig
 
+config IWMMXT
+       bool "Enable iWMMXt support"
+       depends CPU_XSCALE || CPU_XSC3
+       default y if PXA27x
+       help
+         Enable support for iWMMXt context switching at run time if
+         running on a CPU that supports it.
+
 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 config XSCALE_PMU
        bool
@@ -583,7 +629,7 @@ config LEDS
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-                  ARCH_AT91RM9200 || MACH_TRIZEPS4
+                  ARCH_AT91 || MACH_TRIZEPS4
        help
          If you say Y here, the LEDs on your machine will be used
          to provide useful information about your current system status.
@@ -629,7 +675,7 @@ config ALIGNMENT_TRAP
        depends on CPU_CP15_MMU
        default y if !ARCH_EBSA110
        help
-         ARM processors can not fetch/store information which is not
+         ARM processors cannot fetch/store information which is not
          naturally aligned on the bus, i.e., a 4 byte fetch must start at an
          address divisible by 4. On 32-bit ARM processors, these non-aligned
          fetch/store instructions will be emulated in software if you say
@@ -714,9 +760,23 @@ config XIP_PHYS_ADDR
          be linked for and stored to.  This address is dependent on your
          own flash usage.
 
+config KEXEC
+       bool "Kexec system call (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       help
+         kexec is a system call that implements the ability to shutdown your
+         current kernel, and to start another kernel.  It is like a reboot
+         but it is indepedent of the system firmware.   And like a reboot
+         you can start any kernel with it, not just Linux.
+
+         It is an ongoing process to be certain the hardware in a machine
+         is properly shutdown, so do not be surprised if this code does not
+         initially work for you.  It may help to enable device hotplugging
+         support.
+
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
 
 menu "CPU Frequency scaling"
 
@@ -743,6 +803,15 @@ config CPU_FREQ_INTEGRATOR
 
          If in doubt, say Y.
 
+config CPU_FREQ_IMX
+       tristate "CPUfreq driver for i.MX CPUs"
+       depends on ARCH_IMX && CPU_FREQ
+       default n
+       help
+         This enables the CPUfreq driver for i.MX CPUs.
+
+         If in doubt, say N.
+
 endmenu
 
 endif
@@ -879,6 +948,8 @@ endif
 
 source "drivers/scsi/Kconfig"
 
+source "drivers/ata/Kconfig"
+
 source "drivers/md/Kconfig"
 
 source "drivers/message/fusion/Kconfig"
@@ -919,6 +990,8 @@ source "drivers/video/Kconfig"
 
 source "sound/Kconfig"
 
+source "drivers/hid/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"