fix file specification in comments

[powerpc.git] / arch / arm / common / sharpsl_pm.c

diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 3cd8c9e..f412ded 100644 (file)
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -40,6 +40,7 @@
 #define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
 #define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
 #define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
@@ -49,13 +50,6 @@
 #define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
 #define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
 
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
 /*
  * Prototypes
  */
@@ -82,12 +76,13 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 static int get_percentage(int voltage)
 {
        int i = sharpsl_pm.machinfo->bat_levels - 1;
+       int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
        struct battery_thresh *thresh;
 
        if (sharpsl_pm.charge_mode == CHRG_ON)
-               thresh=sharpsl_pm.machinfo->bat_levels_acin;
+               thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
        else
-               thresh=sharpsl_pm.machinfo->bat_levels_noac;
+               thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
 
        while (i > 0 && (voltage > thresh[i].voltage))
                i--;
@@ -131,7 +126,7 @@ static void sharpsl_battery_thread(void *private_)
        sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
 
        /* Corgi cannot confirm when battery fully charged so periodically kick! */
-       if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+       if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
                        && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
                schedule_work(&toggle_charger);
 
@@ -166,11 +161,11 @@ static void sharpsl_battery_thread(void *private_)
                        && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
                        (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
                if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-                       corgibl_limit_intensity(1);
+                       sharpsl_pm.machinfo->backlight_limit(1);
                        sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
                }
        } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-               corgibl_limit_intensity(0);
+               sharpsl_pm.machinfo->backlight_limit(0);
                sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
        }
 
@@ -418,8 +413,10 @@ static int sharpsl_check_battery_temp(void)
        val = get_select_val(buff);
 
        dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-       if (val > SHARPSL_CHARGE_ON_TEMP)
+       if (val > sharpsl_pm.machinfo->charge_on_temp) {
+               printk(KERN_WARNING "Not charging: temperature out of limits.\n");
                return -1;
+       }
 
        return 0;
 }
@@ -450,7 +447,7 @@ static int sharpsl_check_battery_voltage(void)
        val = get_select_val(buff);
        dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
 
-       if (val < SHARPSL_CHARGE_ON_VOLT)
+       if (val < sharpsl_pm.machinfo->charge_on_volt)
                return -1;
 
        return 0;
@@ -468,7 +465,7 @@ static int sharpsl_ac_check(void)
        temp = get_select_val(buff);
        dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
 
-       if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
+       if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
                dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
                return -1;
        }
@@ -579,6 +576,9 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
        while (corgi_enter_suspend(alarm_time,alarm_status,state))
                {}
 
+       if (sharpsl_pm.machinfo->earlyresume)
+               sharpsl_pm.machinfo->earlyresume();
+
        dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
 
        return 0;
@@ -627,8 +627,8 @@ static int sharpsl_fatal_check(void)
        temp = get_select_val(buff);
        dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
 
-       if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
-                       (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+       if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+                       (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
                return -1;
        return 0;
 }