* "current" is in register %ebx during any slow entries.
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
+#include <asm/irqflags.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
NT_MASK = 0x00004000
VM_MASK = 0x00020000
+/* These are replaces for paravirtualization */
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
+#define INTERRUPT_RETURN iret
+#define GET_CR0_INTO_EAX movl %cr0, %eax
+
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli
+#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
#endif
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig check_userspace
+#else
+#define resume_userspace_sig resume_userspace
+#endif
+
#define SAVE_ALL \
cld; \
pushl %es; \
#define RING0_INT_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 3*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_EC_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 4*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_PTREGS_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, OLDESP-EBX;\
/*CFI_OFFSET cs, CS-OLDESP;*/\
CFI_OFFSET eip, EIP-OLDESP;\
ENTRY(ret_from_fork)
CFI_STARTPROC
pushl %eax
- CFI_ADJUST_CFA_OFFSET -4
+ CFI_ADJUST_CFA_OFFSET 4
call schedule_tail
GET_THREAD_INFO(%ebp)
popl %eax
CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
CFI_ENDPROC
preempt_stop
ret_from_intr:
GET_THREAD_INFO(%ebp)
+check_userspace:
movl EFLAGS(%esp), %eax # mix EFLAGS and CS
movb CS(%esp), %al
- testl $(VM_MASK | 3), %eax
- jz resume_kernel
+ andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
# sysenter call handler stub
ENTRY(sysenter_entry)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA esp, 0
CFI_REGISTER esp, ebp
movl TSS_sysenter_esp0(%esp),%esp
sysenter_past_esp:
- sti
+ /*
+ * No need to follow this irqs on/off section: the syscall
+ * disabled irqs and here we enable it straight after entry:
+ */
+ ENABLE_INTERRUPTS
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
pushl $(__USER_CS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET cs, 0*/
- pushl $SYSENTER_RETURN
+ /*
+ * Push current_thread_info()->sysenter_return to the stack.
+ * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+ * pushed above; +8 corresponds to copy_thread's esp0 setting.
+ */
+ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eip, 0
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
- cli
+ DISABLE_INTERRUPTS
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
movl EIP(%esp), %edx
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
- sti
- sysexit
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS_SYSEXIT
CFI_ENDPROC
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx # current->work
jne syscall_exit_work
# See comments in process.c:copy_thread() for details.
movb OLDSS(%esp), %ah
movb CS(%esp), %al
- andl $(VM_MASK | (4 << 8) | 3), %eax
- cmpl $((4 << 8) | 3), %eax
+ andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
+ TRACE_IRQS_IRET
+restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp
CFI_ADJUST_CFA_OFFSET -4
-1: iret
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
- sti
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
CFI_ADJUST_CFA_OFFSET 8
- cli
+ DISABLE_INTERRUPTS
+ TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
* and a switch16 pointer on top of the current frame. */
call setup_x86_bogus_stack
CFI_ADJUST_CFA_OFFSET -8 # frame has moved
+ TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
# than syscall tracing?
# vm86-space
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
ALIGN
work_notifysig_v86:
movl %eax, %esp
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
#endif
# perform syscall exit tracing
syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
- sti # could let do_syscall_trace() call
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
vector=vector+1
.endr
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
ALIGN
common_interrupt:
SAVE_ALL
+ TRACE_IRQS_OFF
movl %esp,%eax
call do_IRQ
jmp ret_from_intr
pushl $~(nr); \
CFI_ADJUST_CFA_OFFSET 4; \
SAVE_ALL; \
+ TRACE_IRQS_OFF \
movl %esp,%eax; \
call smp_/**/name; \
- jmp ret_from_intr; \
+ jmp ret_from_intr; \
CFI_ENDPROC
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
-ENTRY(divide_error)
- RING0_INT_FRAME
- pushl $0 # no error code
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_divide_error
+KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
call *%edi
jmp ret_from_exception
CFI_ENDPROC
+KPROBE_END(page_fault)
ENTRY(coprocessor_error)
RING0_INT_FRAME
pushl $-1 # mark this as an int
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
preempt_stop
jne ok; \
label: \
movl TSS_sysenter_esp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl $__KERNEL_CS; \
- pushl $sysenter_past_esp
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
KPROBE_ENTRY(debug)
RING0_INT_FRAME
call do_debug
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(debug)
+
/*
* NMI is doubly nasty. It can happen _while_ we're handling
* a debug fault, and the debug fault hasn't yet been able to
* check whether we got an NMI on the debug path where the debug
* fault happened on the sysenter path.
*/
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
RING0_INT_FRAME
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
- jmp restore_all
+ jmp restore_nocheck_notrace
CFI_ENDPROC
nmi_stack_fixup:
+ RING0_INT_FRAME
FIX_STACK(12,nmi_stack_correct, 1)
jmp nmi_stack_correct
+
nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
cmpw $__KERNEL_CS,16(%esp)
jne nmi_stack_correct
cmpl $debug,(%esp)
jmp nmi_stack_correct
nmi_16bit_stack:
- RING0_INT_FRAME
- /* create the pointer to lss back */
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
pushl %ss
CFI_ADJUST_CFA_OFFSET 4
pushl %esp
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
CFI_ENDPROC
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
+KPROBE_END(nmi)
KPROBE_ENTRY(int3)
RING0_INT_FRAME
call do_int3
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(int3)
ENTRY(overflow)
RING0_INT_FRAME
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
+KPROBE_END(general_protection)
ENTRY(alignment_check)
RING0_EC_FRAME
jmp error_code
CFI_ENDPROC
-KPROBE_ENTRY(page_fault)
- RING0_EC_FRAME
- pushl $do_page_fault
+ENTRY(divide_error)
+ RING0_INT_FRAME
+ pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_divide_error
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
ENDPROC(arch_unwind_init_running)
#endif
+ENTRY(kernel_thread_helper)
+ pushl $0 # fake return address for unwinder
+ CFI_STARTPROC
+ movl %edx,%eax
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ call *%ebx
+ push %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call do_exit
+ CFI_ENDPROC
+ENDPROC(kernel_thread_helper)
+
.section .rodata,"a"
#include "syscall_table.S"