return vector;
}
-static struct hw_interrupt_type ioapic_level_type;
-static struct hw_interrupt_type ioapic_edge_type;
+static struct irq_chip ioapic_chip;
#define IOAPIC_AUTO -1
#define IOAPIC_EDGE 0
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
trigger == IOAPIC_LEVEL)
- irq_desc[idx].chip = &ioapic_level_type;
+ set_irq_chip_and_handler(idx, &ioapic_chip,
+ handle_fasteoi_irq);
else
- irq_desc[idx].chip = &ioapic_edge_type;
+ set_irq_chip_and_handler(idx, &ioapic_chip,
+ handle_edge_irq);
set_intr_gate(vector, interrupt[idx]);
}
* The timer IRQ doesn't have to know that behind the
* scene we have a 8259A-master in AEOI mode ...
*/
- irq_desc[0].chip = &ioapic_edge_type;
+ irq_desc[0].chip = &ioapic_chip;
+ set_irq_handler(0, handle_edge_irq);
/*
* Add it to the IO-APIC irq-routing table:
*/
/*
+ * Startup quirk:
+ *
* Starting up a edge-triggered IO-APIC interrupt is
* nasty - we need to make sure that we get the edge.
* If it is already asserted for some reason, we need
*
* This is not complete - we should be able to fake
* an edge even if it isn't on the 8259A...
+ *
+ * (We do this for level-triggered IRQs too - it cannot hurt.)
*/
-static unsigned int startup_edge_ioapic_irq(unsigned int irq)
+static unsigned int startup_ioapic_irq(unsigned int irq)
{
int was_pending = 0;
unsigned long flags;
return was_pending;
}
-/*
- * Once we have recorded IRQ_PENDING already, we can mask the
- * interrupt for real. This prevents IRQ storms from unhandled
- * devices.
- */
-static void ack_edge_ioapic_irq(unsigned int irq)
+static void ack_ioapic_irq(unsigned int irq)
{
move_irq(irq);
- if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
- == (IRQ_PENDING | IRQ_DISABLED))
- mask_IO_APIC_irq(irq);
ack_APIC_irq();
}
-/*
- * Level triggered interrupts can just be masked,
- * and shutting down and starting up the interrupt
- * is the same as enabling and disabling them -- except
- * with a startup need to return a "was pending" value.
- *
- * Level triggered interrupts are special because we
- * do not touch any IO-APIC register while handling
- * them. We ack the APIC in the end-IRQ handler, not
- * in the start-IRQ-handler. Protection against reentrance
- * from the same interrupt is still provided, both by the
- * generic IRQ layer and by the fact that an unacked local
- * APIC does not accept IRQs.
- */
-static unsigned int startup_level_ioapic_irq (unsigned int irq)
-{
- unmask_IO_APIC_irq(irq);
-
- return 0; /* don't check for pending */
-}
-
-static void end_level_ioapic_irq (unsigned int irq)
+static void ack_ioapic_quirk_irq(unsigned int irq)
{
unsigned long v;
int i;
}
}
-#ifdef CONFIG_PCI_MSI
-static unsigned int startup_edge_ioapic_vector(unsigned int vector)
+static unsigned int startup_ioapic_vector(unsigned int vector)
{
int irq = vector_to_irq(vector);
- return startup_edge_ioapic_irq(irq);
+ return startup_ioapic_irq(irq);
}
-static void ack_edge_ioapic_vector(unsigned int vector)
+static void ack_ioapic_vector(unsigned int vector)
{
int irq = vector_to_irq(vector);
move_native_irq(vector);
- ack_edge_ioapic_irq(irq);
-}
-
-static unsigned int startup_level_ioapic_vector (unsigned int vector)
-{
- int irq = vector_to_irq(vector);
-
- return startup_level_ioapic_irq (irq);
+ ack_ioapic_irq(irq);
}
-static void end_level_ioapic_vector (unsigned int vector)
+static void ack_ioapic_quirk_vector(unsigned int vector)
{
int irq = vector_to_irq(vector);
move_native_irq(vector);
- end_level_ioapic_irq(irq);
+ ack_ioapic_quirk_irq(irq);
}
static void mask_IO_APIC_vector (unsigned int vector)
unmask_IO_APIC_irq(irq);
}
-#ifdef CONFIG_SMP
+/*
+ * Oh just glorious. If CONFIG_PCI_MSI we've done
+ * #define set_ioapic_affinity set_ioapic_affinity_vector
+ */
+#if defined (CONFIG_SMP) && defined(CONFIG_X86_IO_APIC) && \
+ defined(CONFIG_PCI_MSI)
static void set_ioapic_affinity_vector (unsigned int vector,
cpumask_t cpu_mask)
{
set_ioapic_affinity_irq(irq, cpu_mask);
}
#endif
-#endif
-static int ioapic_retrigger(unsigned int irq)
+static int ioapic_retrigger_vector(unsigned int vector)
{
+ int irq = vector_to_irq(vector);
+
send_IPI_self(IO_APIC_VECTOR(irq));
return 1;
}
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
- .typename = "IO-APIC-edge",
- .startup = startup_edge_ioapic,
- .shutdown = shutdown_edge_ioapic,
- .enable = enable_edge_ioapic,
- .disable = disable_edge_ioapic,
- .ack = ack_edge_ioapic,
- .end = end_edge_ioapic,
+static struct irq_chip ioapic_chip __read_mostly = {
+ .name = "IO-APIC",
+ .startup = startup_ioapic_vector,
+ .mask = mask_IO_APIC_vector,
+ .unmask = unmask_IO_APIC_vector,
+ .ack = ack_ioapic_vector,
+ .eoi = ack_ioapic_quirk_vector,
#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
#endif
- .retrigger = ioapic_retrigger,
+ .retrigger = ioapic_retrigger_vector,
};
-static struct hw_interrupt_type ioapic_level_type __read_mostly = {
- .typename = "IO-APIC-level",
- .startup = startup_level_ioapic,
- .shutdown = shutdown_level_ioapic,
- .enable = enable_level_ioapic,
- .disable = disable_level_ioapic,
- .ack = mask_and_ack_level_ioapic,
- .end = end_level_ioapic,
-#ifdef CONFIG_SMP
- .set_affinity = set_ioapic_affinity,
-#endif
- .retrigger = ioapic_retrigger,
-};
static inline void init_IO_APIC_traps(void)
{
make_8259A_irq(irq);
else
/* Strange. Oh, well.. */
- irq_desc[irq].chip = &no_irq_type;
+ irq_desc[irq].chip = &no_irq_chip;
}
}
}
-static void enable_lapic_irq (unsigned int irq)
-{
- unsigned long v;
+/*
+ * The local APIC irq-chip implementation:
+ */
- v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+static void ack_apic(unsigned int irq)
+{
+ ack_APIC_irq();
}
-static void disable_lapic_irq (unsigned int irq)
+static void mask_lapic_irq (unsigned int irq)
{
unsigned long v;
apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
}
-static void ack_lapic_irq (unsigned int irq)
+static void unmask_lapic_irq (unsigned int irq)
{
- ack_APIC_irq();
-}
+ unsigned long v;
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
+ v = apic_read(APIC_LVT0);
+ apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
-static struct hw_interrupt_type lapic_irq_type __read_mostly = {
- .typename = "local-APIC-edge",
- .startup = NULL, /* startup_irq() not used for IRQ0 */
- .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
- .enable = enable_lapic_irq,
- .disable = disable_lapic_irq,
- .ack = ack_lapic_irq,
- .end = end_lapic_irq
+static struct irq_chip lapic_chip __read_mostly = {
+ .name = "local-APIC-edge",
+ .mask = mask_lapic_irq,
+ .unmask = unmask_lapic_irq,
+ .eoi = ack_apic,
};
static void setup_nmi (void)
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
disable_8259A_irq(0);
- irq_desc[0].chip = &lapic_irq_type;
+ set_irq_chip_and_handler(0, &lapic_chip, handle_fasteoi_irq);
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
device_initcall(ioapic_init_sysfs);
+#ifdef CONFIG_PCI_MSI
+/*
+ * Dynamic irq allocate and deallocation for MSI
+ */
+int create_irq(void)
+{
+ /* Hack of the day: irq == vector.
+ *
+ * Ultimately this will be be more general,
+ * and not depend on the irq to vector identity mapping.
+ * But this version is needed until msi.c can cope with
+ * the more general form.
+ */
+ int irq, vector;
+ unsigned long flags;
+ vector = assign_irq_vector(AUTO_ASSIGN);
+ irq = vector;
+
+ if (vector >= 0) {
+ struct irq_desc *desc;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ vector_irq[vector] = irq;
+ irq_vector[irq] = vector;
+ spin_unlock_irqrestore(&vector_lock, flags);
+
+ set_intr_gate(vector, interrupt[irq]);
+
+ dynamic_irq_init(irq);
+ }
+ return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+ unsigned long flags;
+ unsigned int vector;
+
+ dynamic_irq_cleanup(irq);
+
+ spin_lock_irqsave(&vector_lock, flags);
+ vector = irq_vector[irq];
+ vector_irq[vector] = -1;
+ irq_vector[irq] = 0;
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
+#endif /* CONFIG_PCI_MSI */
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
projects / powerpc.git / blobdiff