/* ld script to make i386 Linux kernel
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
*/
#define LOAD_OFFSET __PAGE_OFFSET
#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm/cache.h>
+#include <asm/boot.h>
OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
OUTPUT_ARCH(i386)
}
SECTIONS
{
- . = __KERNEL_START;
+ . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
phys_startup_32 = startup_32 - LOAD_OFFSET;
/* read-only */
- _text = .; /* Text and read-only data */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _text = .; /* Text and read-only data */
*(.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
- } :text = 0x9090
-
- _etext = .; /* End of text section */
+ _etext = .; /* End of text section */
+ } :text = 0x9090
. = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
- __stop___ex_table = .;
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
RODATA
. = ALIGN(4);
- __tracedata_start = .;
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
+ __tracedata_start = .;
*(.tracedata)
+ __tracedata_end = .;
}
- __tracedata_end = .;
/* writeable */
+ . = ALIGN(4096);
.data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
*(.data)
CONSTRUCTORS
} :data
. = ALIGN(4096);
- __nosave_begin = .;
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
- . = ALIGN(4096);
- __nosave_end = .;
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(4096);
+ __nosave_end = .;
+ }
. = ALIGN(4096);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
/* rarely changed data like cpu maps */
. = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) }
- _edata = .; /* End of data section */
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
+ _edata = .; /* End of data section */
+ }
#ifdef CONFIG_STACK_UNWIND
. = ALIGN(4);
/* might get freed after init */
. = ALIGN(4096);
- __smp_alt_begin = .;
- __smp_alt_instructions = .;
.smp_altinstructions : AT(ADDR(.smp_altinstructions) - LOAD_OFFSET) {
+ __smp_alt_begin = .;
+ __smp_alt_instructions = .;
*(.smp_altinstructions)
+ __smp_alt_instructions_end = .;
}
- __smp_alt_instructions_end = .;
. = ALIGN(4);
- __smp_locks = .;
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
*(.smp_locks)
+ __smp_locks_end = .;
}
- __smp_locks_end = .;
.smp_altinstr_replacement : AT(ADDR(.smp_altinstr_replacement) - LOAD_OFFSET) {
*(.smp_altinstr_replacement)
+ __smp_alt_end = .;
}
+ /* will be freed after init
+ * Following ALIGN() is required to make sure no other data falls on the
+ * same page where __smp_alt_end is pointing as that page might be freed
+ * after boot. Always make sure that ALIGN() directive is present after
+ * the section which contains __smp_alt_end.
+ */
. = ALIGN(4096);
- __smp_alt_end = .;
/* will be freed after init */
. = ALIGN(4096); /* Init code and data */
- __init_begin = .;
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .;
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
. = ALIGN(16);
- __setup_start = .;
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
INITCALLS
+ __initcall_end = .;
}
- __initcall_end = .;
- __con_initcall_start = .;
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
*(.con_initcall.init)
+ __con_initcall_end = .;
}
- __con_initcall_end = .;
SECURITY_INIT
. = ALIGN(4);
- __alt_instructions = .;
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
*(.altinstructions)
+ __alt_instructions_end = .;
}
- __alt_instructions_end = .;
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
*(.altinstr_replacement)
}
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
. = ALIGN(4096);
- __initramfs_start = .;
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
- __initramfs_end = .;
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
. = ALIGN(L1_CACHE_BYTES);
- __per_cpu_start = .;
- .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
- __per_cpu_end = .;
+ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
+ __per_cpu_start = .;
+ *(.data.percpu)
+ __per_cpu_end = .;
+ }
. = ALIGN(4096);
- __init_end = .;
/* freed after init ends here */
- __bss_start = .; /* BSS */
- .bss.page_aligned : AT(ADDR(.bss.page_aligned) - LOAD_OFFSET) {
- *(.bss.page_aligned)
- }
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
*(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ _end = . ;
+ /* This is where the kernel creates the early boot page tables */
+ . = ALIGN(4096);
+ pg0 = . ;
}
- . = ALIGN(4);
- __bss_stop = .;
-
- _end = . ;
-
- /* This is where the kernel creates the early boot page tables */
- . = ALIGN(4096);
- pg0 = .;
/* Sections to be discarded */
/DISCARD/ : {
projects / powerpc.git / blobdiff