m68knommu: add configure support for Intec boards

[powerpc.git] / arch / m68knommu / Kconfig

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4..185906b 100644 (file)
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -17,6 +17,10 @@ config FPU
        bool
        default n
 
+config ZONE_DMA
+       bool
+       default y
+
 config RWSEM_GENERIC_SPINLOCK
        bool
        default y
@@ -25,6 +29,14 @@ config RWSEM_XCHGADD_ALGORITHM
        bool
        default n
 
+config ARCH_HAS_ILOG2_U32
+       bool
+       default n
+
+config ARCH_HAS_ILOG2_U64
+       bool
+       default n
+
 config GENERIC_FIND_NEXT_BIT
        bool
        default y
@@ -33,6 +45,10 @@ config GENERIC_HWEIGHT
        bool
        default y
 
+config GENERIC_HARDIRQS
+       bool
+       default y
+
 config GENERIC_CALIBRATE_DELAY
        bool
        default y
@@ -41,6 +57,9 @@ config TIME_LOW_RES
        bool
        default y
 
+config NO_IOPORT
+       def_bool y
+
 source "init/Kconfig"
 
 menu "Processor type and features"
@@ -173,7 +192,7 @@ config CLOCK_DIV
          On many SoC style CPUs the master CPU clock is also used to drive 
          on-chip peripherals. The clock that is distributed to these
          peripherals is sometimes a fixed ratio of the master clock
-         frequency. If so then set this to the divider ration of the
+         frequency. If so then set this to the divider ratio of the
          master clock to the peripheral clock. If not sure then select 1.
 
 config OLDMASK
@@ -192,11 +211,23 @@ config PILOT3
          Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
 
 config XCOPILOT_BUGS
-       bool "  (X)Copilot support"
+       bool "(X)Copilot support"
        depends on PILOT3
        help
          Support the bugs of Xcopilot.
 
+config UC5272
+        bool 'Arcturus Networks uC5272 dimm board support'
+        depends on M5272
+        help
+          Support for the Arcturus Networks uC5272 dimm board.
+
+config UC5282
+       bool "Arcturus Networks uC5282 board support"
+          depends on M528x
+       help
+          Support for the Arcturus Networks uC5282 dimm board.
+
 config UCSIMM
        bool "uCsimm module support"
        depends on M68EZ328
@@ -216,20 +247,20 @@ config DRAGEN2
          Support for the DragenEngine II board.
 
 config DIRECT_IO_ACCESS
-       bool "  Allow user to access IO directly"
+       bool "Allow user to access IO directly"
        depends on (UCSIMM || UCDIMM || DRAGEN2)
        help
          Disable the CPU internal registers protection in user mode,
           to allow a user application to read/write them.
 
 config INIT_LCD
-       bool "  Initialize LCD"
+       bool "Initialize LCD"
        depends on (UCSIMM || UCDIMM || DRAGEN2)
        help
          Initialize the LCD controller of the 68x328 processor.
 
 config MEMORY_RESERVE
-       int "  Memory reservation (MiB)"
+       int "Memory reservation (MiB)"
        depends on (UCSIMM || UCDIMM)
        help
          Reserve certain memory regions on 68x328 based boards.
@@ -323,6 +354,18 @@ config SOM5282EM
        depends on M528x
        help
          Support for the EMAC.Inc SOM5282EM module.  
+         
+config WILDFIRE
+       bool "Intec Automation Inc. WildFire board support"
+       depends on M528x
+       help
+         Support for the Intec Automation Inc. WildFire.
+         
+config WILDFIREMOD
+       bool "Intec Automation Inc. WildFire module support"
+       depends on M528x
+       help
+         Support for the Intec Automation Inc. WildFire module.
 
 config ARN5307
        bool "Arnewsh 5307 board support"
@@ -409,7 +452,7 @@ config MOD5272
          Support for the Netburner MOD-5272 board.
 
 config ROMFS_FROM_ROM
-       bool "  ROMFS image not RAM resident"
+       bool "ROMFS image not RAM resident"
        depends on (NETtel || SNAPGEAR)
        help
          The ROMfs filesystem will stay resident in the FLASH/ROM, not be
@@ -455,14 +498,6 @@ config AVNET
        default y
        depends on (AVNET5282)
 
-config LARGE_ALLOCS
-       bool "Allow allocating large blocks (> 1MB) of memory"
-       help
-         Allow the slab memory allocator to keep chains for very large
-         memory sizes - upto 32MB. You may need this if your system has
-         a lot of RAM, and you need to able to allocate very large
-         contiguous chunks. If unsure, say N.
-
 config 4KSTACKS
        bool "Use 4Kb for kernel stacks instead of 8Kb"
        default y
@@ -565,7 +600,7 @@ config ROMVEC
        depends on ROM
        help
          This is almost always the same as the base of the ROM. Since on all
-         68000 type varients the vectors are at the base of the boot device
+         68000 type variants the vectors are at the base of the boot device
          on system startup.
 
 config ROMVECSIZE
@@ -574,7 +609,7 @@ config ROMVECSIZE
        depends on ROM
        help
          Define the size of the vector region in ROM. For most 68000
-         varients this would be 0x400 bytes in size. Set to 0 if you do
+         variants this would be 0x400 bytes in size. Set to 0 if you do
          not want a vector region at the start of the ROM.
 
 config ROMSTART