[POWERPC] 85xx: Add device nodes for error reporting devices used by EDAC

[powerpc.git] / arch / powerpc / boot / Makefile

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 3716594..d4f9fef 100644 (file)
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -37,13 +37,15 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
-               $(addprefix $(obj)/,$(zlibheader))
+$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+       $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
                ns16550.c serial.c simple_alloc.c div64.S util.S \
-               gunzip_util.c elf_util.c $(zlib) devtree.c
-src-plat := of.c cuboot-83xx.c cuboot-85xx.c
+               gunzip_util.c elf_util.c $(zlib) devtree.c \
+               44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c
+src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
+               cuboot-ebony.c treeboot-ebony.c prpmc2800.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -129,7 +131,15 @@ image-$(CONFIG_PPC_CELLEB)         += zImage.pseries
 image-$(CONFIG_PPC_CHRP)               += zImage.chrp
 image-$(CONFIG_PPC_EFIKA)              += zImage.chrp
 image-$(CONFIG_PPC_PMAC)               += zImage.pmac
-image-$(CONFIG_DEFAULT_UIMAGE)         += uImage cuImage
+image-$(CONFIG_PPC_HOLLY)              += zImage.holly-elf
+image-$(CONFIG_PPC_PRPMC2800)          += zImage.prpmc2800
+image-$(CONFIG_DEFAULT_UIMAGE)         += uImage
+
+ifneq ($(CONFIG_DEVICE_TREE),"")
+image-$(CONFIG_PPC_83xx)               += cuImage.83xx
+image-$(CONFIG_PPC_85xx)               += cuImage.85xx
+image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
+endif
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -138,15 +148,34 @@ image-$(CONFIG_PPC_PMAC)  += zImage.coff zImage.miboot
 endif
 
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
-initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
+initrd-y := $(patsubst zImage%, zImage.initrd%, \
+               $(patsubst treeImage%, treeImage.initrd%, $(image-y)))
 initrd-y := $(filter-out $(image-y), $(initrd-y))
 targets        += $(image-y) $(initrd-y)
 
 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
 
+dts-  := $(patsubst zImage%, zImage.dts%, $(image-n) $(image-))
+dts-y := $(patsubst zImage%, zImage.dts%, $(image-y))
+dts-y := $(filter-out $(image-y), $(dts-y))
+targets        += $(image-y) $(dts-y)
+
+dts_initrd-  := $(patsubst zImage%, zImage.dts_initrd%, $(image-n) $(image-))
+dts_initrd-y := $(patsubst zImage%, zImage.dts_initrd%, $(image-y))
+dts_initrd-y := $(filter-out $(image-y), $(dts_initrd-y))
+targets        += $(image-y) $(dts_initrd-y)
+
+$(addprefix $(obj)/, $(dts_initrd-y)): $(obj)/ramdisk.image.gz
+
 # Don't put the ramdisk on the pattern rule; when its missing make will try
 # the pattern rule with less dependencies that also matches (even with the
 # hard dependency listed).
+$(obj)/zImage.dts_initrd.%: vmlinux $(wrapperbits) $(dts) $(obj)/ramdisk.image.gz
+       $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz)
+
+$(obj)/zImage.dts.%: vmlinux $(wrapperbits) $(dts)
+       $(call if_changed,wrap,$*,$(dts))
+
 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
        $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
 
@@ -159,30 +188,44 @@ $(obj)/zImage.ps3: vmlinux
 $(obj)/zImage.initrd.ps3: vmlinux
        @echo "  WARNING zImage.initrd.ps3 not supported (yet)"
 
+$(obj)/zImage.holly-elf: vmlinux $(wrapperbits)
+       $(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,)
+
+$(obj)/zImage.initrd.holly-elf: vmlinux $(wrapperbits) $(obj)/ramdisk.image.gz
+       $(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,$(obj)/ramdisk.image.gz)
+
 $(obj)/uImage: vmlinux $(wrapperbits)
        $(call if_changed,wrap,uboot)
 
-cuboot-plat-$(CONFIG_83xx) += 83xx
-cuboot-plat-$(CONFIG_85xx) += 85xx
-cuboot-plat-y += unknown-platform
-
+# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them
 dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
-       ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE)
+       ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=%)
+
+$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits)
+       $(call if_changed,wrap,cuboot-$*,$(dts))
+
+$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits)
+       $(call if_changed,wrap,treeboot-$*,$(dts))
 
-$(obj)/cuImage: vmlinux $(wrapperbits)
-       $(call if_changed,wrap,cuboot-$(word 1,$(cuboot-plat-y)),$(dts))
+$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits)
+       $(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz)
 
 $(obj)/zImage:         $(addprefix $(obj)/, $(image-y))
        @rm -f $@; ln $< $@
 $(obj)/zImage.initrd:  $(addprefix $(obj)/, $(initrd-y))
        @rm -f $@; ln $< $@
+$(obj)/zImage.dts:     $(addprefix $(obj)/, $(dts-y))
+       @rm -f $@; ln $< $@
+$(obj)/zImage.dts_initrd:      $(addprefix $(obj)/, $(dts_initrd-y))
+       @rm -f $@; ln $< $@
+
 
 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
        sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
 
 # anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd \
-               cuImage.elf cuImage.bin.gz
+clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* \
+       treeImage.* zImage.dts zImage.dts_initrd
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin