#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/etherdevice.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
(ns) > 0)
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev,
+ const u32 *addrp, u64 size, unsigned int flags,
+ struct resource *r);
+
+
/* Debug utility */
#ifdef DEBUG
static void of_dump_addr(const char *s, const u32 *addr, int na)
}
+#ifdef CONFIG_PCI
/*
* PCI bus specific translator
*/
switch((w >> 24) & 0x03) {
case 0x01:
flags |= IORESOURCE_IO;
+ break;
case 0x02: /* 32 bits */
case 0x03: /* 64 bits */
flags |= IORESOURCE_MEM;
+ break;
}
if (w & 0x40000000)
flags |= IORESOURCE_PREFETCH;
return flags;
}
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+ unsigned int *flags)
+{
+ const u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ if (strcmp(bus->name, "pci")) {
+ of_node_put(parent);
+ return NULL;
+ }
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = get_property(dev, bus->addresses, &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+ if (size)
+ *size = of_read_number(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+{
+ const u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_pci_address(dev, bar, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ u32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard OF
+ * parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn)
+ return of_irq_map_one(dn, 0, out_irq);
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+#ifdef CONFIG_PPC64
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+#else
+ struct pci_controller *host;
+ host = pci_bus_to_host(pdev->bus);
+ ppnode = host ? host->arch_data : NULL;
+#endif
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't include
+ * the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ pdev = ppdev;
+ }
+
+ laddr[0] = (pdev->bus->number << 16)
+ | (pdev->devfn << 8);
+ laddr[1] = laddr[2] = 0;
+ return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+#endif /* CONFIG_PCI */
+
/*
* ISA bus specific translator
*/
*/
static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
/* PCI */
{
.name = "pci",
.translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
+#endif /* CONFIG_PCI */
/* ISA */
{
.name = "isa",
}
EXPORT_SYMBOL(of_get_address);
-const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
- unsigned int *flags)
-{
- const u32 *prop;
- unsigned int psize;
- struct device_node *parent;
- struct of_bus *bus;
- int onesize, i, na, ns;
-
- /* Get parent & match bus type */
- parent = of_get_parent(dev);
- if (parent == NULL)
- return NULL;
- bus = of_match_bus(parent);
- if (strcmp(bus->name, "pci")) {
- of_node_put(parent);
- return NULL;
- }
- bus->count_cells(dev, &na, &ns);
- of_node_put(parent);
- if (!OF_CHECK_COUNTS(na, ns))
- return NULL;
-
- /* Get "reg" or "assigned-addresses" property */
- prop = get_property(dev, bus->addresses, &psize);
- if (prop == NULL)
- return NULL;
- psize /= 4;
-
- onesize = na + ns;
- for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
- if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
- if (size)
- *size = of_read_number(prop + na, ns);
- if (flags)
- *flags = bus->get_flags(prop);
- return prop;
- }
- return NULL;
-}
-EXPORT_SYMBOL(of_get_pci_address);
-
static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
u64 size, unsigned int flags,
struct resource *r)
}
EXPORT_SYMBOL_GPL(of_address_to_resource);
-int of_pci_address_to_resource(struct device_node *dev, int bar,
- struct resource *r)
-{
- const u32 *addrp;
- u64 size;
- unsigned int flags;
-
- addrp = of_get_pci_address(dev, bar, &size, &flags);
- if (addrp == NULL)
- return -EINVAL;
- return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
-
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
{
/*
* Old machines just have a list of interrupt numbers
- * and no interrupt-controller nodes.
+ * and no interrupt-controller nodes. We also have dodgy
+ * cases where the APPL,interrupts property is completely
+ * missing behind pci-pci bridges and we have to get it
+ * from the parent (the bridge itself, as apple just wired
+ * everything together on these)
*/
- ints = get_property(device, "AAPL,interrupts", &intlen);
+ while (device) {
+ ints = get_property(device, "AAPL,interrupts", &intlen);
+ if (ints != NULL)
+ break;
+ device = device->parent;
+ if (device && strcmp(device->type, "pci") != 0)
+ break;
+ }
if (ints == NULL)
return -EINVAL;
intlen /= sizeof(u32);
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
-#ifdef CONFIG_PCI
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
- return (((pin - 1) + slot) % 4) + 1;
-}
-
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+/**
+ * Search the device tree for the best MAC address to use. 'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address. If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot. For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses. Some older U-Boots only initialized 'local-mac-address'. In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
+ struct property *pp;
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ pp = of_find_property(np, "mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
+ pp = of_find_property(np, "local-mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
+ pp = of_find_property(np, "address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
- ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->arch_data : NULL;
-#endif
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't include
- * the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+ return NULL;
}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
+EXPORT_SYMBOL(of_get_mac_address);
+
projects / powerpc.git / blobdiff