pu = pud_offset(pg, addr);
if (!pud_none(*pu)) {
pm = pmd_offset(pu, addr);
+#ifdef CONFIG_PPC_64K_PAGES
+ /* Currently, we use the normal PTE offset within full
+ * size PTE pages, thus our huge PTEs are scattered in
+ * the PTE page and we do waste some. We may change
+ * that in the future, but the current mecanism keeps
+ * things much simpler
+ */
+ if (!pmd_none(*pm)) {
+ /* Note: pte_offset_* are all equivalent on
+ * ppc64 as we don't have HIGHMEM
+ */
+ pt = pte_offset_kernel(pm, addr);
+ return pt;
+ }
+#else /* CONFIG_PPC_64K_PAGES */
+ /* On 4k pages, we put huge PTEs in the PMD page */
pt = (pte_t *)pm;
- BUG_ON(!pmd_none(*pm)
- && !(pte_present(*pt) && pte_huge(*pt)));
return pt;
+#endif /* CONFIG_PPC_64K_PAGES */
}
}
if (pu) {
pm = pmd_alloc(mm, pu, addr);
if (pm) {
+#ifdef CONFIG_PPC_64K_PAGES
+ /* See comment in huge_pte_offset. Note that if we ever
+ * want to put the page size in the PMD, we would have
+ * to open code our own pte_alloc* function in order
+ * to populate and set the size atomically
+ */
+ pt = pte_alloc_map(mm, pm, addr);
+#else /* CONFIG_PPC_64K_PAGES */
pt = (pte_t *)pm;
- BUG_ON(!pmd_none(*pm)
- && !(pte_present(*pt) && pte_huge(*pt)));
+#endif /* CONFIG_PPC_64K_PAGES */
return pt;
}
}
return NULL;
}
-#define HUGEPTE_BATCH_SIZE (HPAGE_SIZE / PMD_SIZE)
-
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
- int i;
-
if (pte_present(*ptep)) {
- pte_clear(mm, addr, ptep);
+ /* We open-code pte_clear because we need to pass the right
+ * argument to hpte_update (huge / !huge)
+ */
+ unsigned long old = pte_update(ptep, ~0UL);
+ if (old & _PAGE_HASHPTE)
+ hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
flush_tlb_pending();
}
-
- for (i = 0; i < HUGEPTE_BATCH_SIZE; i++) {
- *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- ptep++;
- }
+ *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
}
pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
unsigned long old = pte_update(ptep, ~0UL);
- int i;
if (old & _PAGE_HASHPTE)
- hpte_update(mm, addr, old, 0);
-
- for (i = 1; i < HUGEPTE_BATCH_SIZE; i++)
- ptep[i] = __pte(0);
+ hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
+ *ptep = __pte(0);
return __pte(old);
}
BUG_ON(area >= NUM_HIGH_AREAS);
+ /* Hack, so that each addresses is controlled by exactly one
+ * of the high or low area bitmaps, the first high area starts
+ * at 4GB, not 0 */
+ if (start == 0)
+ start = 0x100000000UL;
+
/* Check no VMAs are in the region */
vma = find_vma(mm, start);
if (vma && (vma->vm_start < end))
int lastshift;
u16 areamask, curareas;
+ if (HPAGE_SHIFT == 0)
+ return -EINVAL;
if (len & ~HPAGE_MASK)
return -EINVAL;
unsigned long ea, unsigned long vsid, int local)
{
pte_t *ptep;
- unsigned long va, vpn;
- pte_t old_pte, new_pte;
- unsigned long rflags, prpn;
+ unsigned long old_pte, new_pte;
+ unsigned long va, rflags, pa;
long slot;
int err = 1;
- spin_lock(&mm->page_table_lock);
-
ptep = huge_pte_offset(mm, ea);
/* Search the Linux page table for a match with va */
va = (vsid << 28) | (ea & 0x0fffffff);
- vpn = va >> HPAGE_SHIFT;
/*
* If no pte found or not present, send the problem up to
if (unlikely(!ptep || pte_none(*ptep)))
goto out;
-/* BUG_ON(pte_bad(*ptep)); */
-
/*
* Check the user's access rights to the page. If access should be
* prevented then send the problem up to do_page_fault.
*/
- old_pte = *ptep;
- new_pte = old_pte;
-
- rflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW));
+ do {
+ old_pte = pte_val(*ptep);
+ if (old_pte & _PAGE_BUSY)
+ goto out;
+ new_pte = old_pte | _PAGE_BUSY |
+ _PAGE_ACCESSED | _PAGE_HASHPTE;
+ } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+ old_pte, new_pte));
+
+ rflags = 0x2 | (!(new_pte & _PAGE_RW));
/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
- rflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC);
+ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
/* Check if pte already has an hpte (case 2) */
- if (unlikely(pte_val(old_pte) & _PAGE_HASHPTE)) {
+ if (unlikely(old_pte & _PAGE_HASHPTE)) {
/* There MIGHT be an HPTE for this pte */
unsigned long hash, slot;
- hash = hpt_hash(vpn, 1);
- if (pte_val(old_pte) & _PAGE_SECONDARY)
+ hash = hpt_hash(va, HPAGE_SHIFT);
+ if (old_pte & _PAGE_F_SECOND)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (pte_val(old_pte) & _PAGE_GROUP_IX) >> 12;
+ slot += (old_pte & _PAGE_F_GIX) >> 12;
if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1)
- pte_val(old_pte) &= ~_PAGE_HPTEFLAGS;
+ old_pte &= ~_PAGE_HPTEFLAGS;
}
- if (likely(!(pte_val(old_pte) & _PAGE_HASHPTE))) {
- unsigned long hash = hpt_hash(vpn, 1);
+ if (likely(!(old_pte & _PAGE_HASHPTE))) {
+ unsigned long hash = hpt_hash(va, HPAGE_SHIFT);
unsigned long hpte_group;
- prpn = pte_pfn(old_pte);
+ pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
repeat:
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
- /* Update the linux pte with the HPTE slot */
- pte_val(new_pte) &= ~_PAGE_HPTEFLAGS;
- pte_val(new_pte) |= _PAGE_HASHPTE;
+ /* clear HPTE slot informations in new PTE */
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
/* Add in WIMG bits */
/* XXX We should store these in the pte */
+ /* --BenH: I think they are ... */
rflags |= _PAGE_COHERENT;
- slot = ppc_md.hpte_insert(hpte_group, va, prpn,
- HPTE_V_LARGE, rflags);
+ /* Insert into the hash table, primary slot */
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+ mmu_huge_psize);
/* Primary is full, try the secondary */
if (unlikely(slot == -1)) {
- pte_val(new_pte) |= _PAGE_SECONDARY;
+ new_pte |= _PAGE_F_SECOND;
hpte_group = ((~hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
- slot = ppc_md.hpte_insert(hpte_group, va, prpn,
- HPTE_V_LARGE |
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
HPTE_V_SECONDARY,
- rflags);
+ mmu_huge_psize);
if (slot == -1) {
if (mftb() & 0x1)
hpte_group = ((hash & htab_hash_mask) *
if (unlikely(slot == -2))
panic("hash_huge_page: pte_insert failed\n");
- pte_val(new_pte) |= (slot<<12) & _PAGE_GROUP_IX;
-
- /*
- * No need to use ldarx/stdcx here because all who
- * might be updating the pte will hold the
- * page_table_lock
- */
- *ptep = new_pte;
+ new_pte |= (slot << 12) & _PAGE_F_GIX;
}
+ /*
+ * No need to use ldarx/stdcx here because all who
+ * might be updating the pte will hold the
+ * page_table_lock
+ */
+ *ptep = __pte(new_pte & ~_PAGE_BUSY);
+
err = 0;
out:
- spin_unlock(&mm->page_table_lock);
-
return err;
}
projects / powerpc.git / blobdiff