*
* 2004-2005 (c) Tundra Semiconductor Corp.
* Author: Alex Bounine (alexandreb@tundra.com)
+ * Author: Roy Zang (tie-fei.zang@freescale.com)
+ * Add pci interrupt router host
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
u32 tsi108_pci_cfg_base;
u32 tsi108_csr_vir_base;
+static struct device_node *pci_irq_node;
+static struct irq_host *pci_irq_host;
extern u32 get_vir_csrbase(void);
extern u32 tsi108_read_reg(u32 reg_offset);
int len;
struct pci_controller *hose;
struct resource rsrc;
- int *bus_range;
+ const int *bus_range;
int primary = 0, has_address = 0;
/* PCI Config mapping */
has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
/* Get bus range if any */
- bus_range = (int *)get_property(dev, "bus-range", &len);
+ bus_range = get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
(hose)->ops = &tsi108_direct_pci_ops;
- printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+ printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
"Firmware bus number: %d->%d\n",
rsrc.start, hose->first_busno, hose->last_busno);
mb();
}
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
{
u_int temp = 0;
int irq = -1;
* Interrupt controller descriptor for cascaded PCI interrupt controller.
*/
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
.typename = "tsi108_PCI_int",
- .enable = tsi108_pci_irq_enable,
- .disable = tsi108_pci_irq_disable,
+ .mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
+ .unmask = tsi108_pci_irq_enable,
+};
+
+static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+ *out_hwirq = intspec[0];
+ *out_flags = IRQ_TYPE_LEVEL_HIGH;
+ return 0;
+}
+
+static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{ unsigned int irq;
+ DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+ if ((virq >= 1) && (virq <= 4)){
+ irq = virq + IRQ_PCI_INTAD_BASE - 1;
+ get_irq_desc(irq)->status |= IRQ_LEVEL;
+ set_irq_chip(irq, &tsi108_pci_irq);
+ }
+ return 0;
+}
+
+static int pci_irq_host_match(struct irq_host *h, struct device_node *node)
+{
+ return pci_irq_node == node;
+}
+
+static struct irq_host_ops pci_irq_host_ops = {
+ .match = pci_irq_host_match,
+ .map = pci_irq_host_map,
+ .xlate = pci_irq_host_xlate,
};
/*
* to the MPIC.
*/
-void __init tsi108_pci_int_init(void)
+void __init tsi108_pci_int_init(struct device_node *node)
{
- u_int i;
-
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
- for (i = 0; i < NUM_PCI_IRQS; i++) {
- irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
- irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
+ pci_irq_node = of_node_get(node);
+ pci_irq_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &pci_irq_host_ops, 0);
+ if (pci_irq_host == NULL) {
+ printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
+ return;
}
init_pci_source();
}
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc)
{
- return get_pci_source();
+ unsigned int cascade_irq = get_pci_source();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ desc->chip->eoi(irq);
}