[PATCH] powerpc: generalize PPC44x_PIN_SIZE

[powerpc.git] / arch / ppc / Kconfig

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index d658101..11899f0 100644 (file)
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -58,11 +58,11 @@ config 6xx
        help
          There are four types of PowerPC chips supported.  The more common
          types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-         versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
-         versions (403 and 405) and the high end 64 bit Power processors
-         (POWER 3, POWER4, and IBM 970 also known as G5)
+         versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
+         embedded versions (403 and 405) and the POWER3 processor.
+         (For support for more recent 64-bit processors, set ARCH=powerpc.)
          Unless you are building a kernel for one of the embedded processor
-         systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
+         systems or a POWER3-based IBM RS/6000, choose 6xx.
          Note that the kernel runs in 32-bit mode even on 64-bit chips.
          Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
          specific support for that chipset is asked later on.
@@ -77,10 +77,6 @@ config POWER3
        select PPC_FPU
        bool "POWER3"
 
-config POWER4
-       select PPC_FPU
-       bool "POWER4 and 970 (G5)"
-
 config 8xx
        bool "8xx"
 
@@ -123,7 +119,7 @@ config PHYS_64BIT
 
 config ALTIVEC
        bool "AltiVec Support"
-       depends on 6xx || POWER4
+       depends on 6xx
        depends on !8260 && !83xx
        ---help---
          This option enables kernel support for the Altivec extensions to the
@@ -235,18 +231,9 @@ config KEXEC
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_PMAC
-       bool "Support for Apple PowerBooks"
-       depends on CPU_FREQ && ADB_PMU
-       select CPU_FREQ_TABLE
-       help
-         This adds support for frequency switching on Apple PowerBooks,
-         this currently includes some models of iBook & Titanium
-         PowerBook.
-
 config PPC601_SYNC_FIX
        bool "Workarounds for PPC601 bugs"
-       depends on 6xx && (PPC_PREP || PPC_PMAC)
+       depends on 6xx && PPC_PREP
        help
          Some versions of the PPC601 (the first PowerPC chip) have bugs which
          mean that extra synchronization instructions are required near
@@ -258,26 +245,17 @@ config PPC601_SYNC_FIX
 
          If in doubt, say Y here.
 
-config HOTPLUG_CPU
-       bool "Support for enabling/disabling CPUs"
-       depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC
-       ---help---
-         Say Y here to be able to disable and re-enable individual
-         CPUs at runtime on SMP machines.
-
-         Say N if you are unsure.
-
 source arch/ppc/platforms/4xx/Kconfig
 source arch/ppc/platforms/85xx/Kconfig
 
 config PPC64BRIDGE
        bool
-       depends on POWER3 || POWER4
+       depends on POWER3
        default y
 
 config PPC_STD_MMU
        bool
-       depends on 6xx || POWER3 || POWER4
+       depends on 6xx || POWER3
        default y
 
 config NOT_COHERENT_CACHE
@@ -505,7 +483,7 @@ endchoice
 
 choice
        prompt "Machine Type"
-       depends on 6xx || POWER3 || POWER4
+       depends on 6xx || POWER3
        default PPC_MULTIPLATFORM
        ---help---
          Linux currently supports several different kinds of PowerPC-based
@@ -516,11 +494,15 @@ choice
          Platform) machines (including all of the recent IBM RS/6000 and
          pSeries machines), and several embedded PowerPC systems containing
          4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-         default option is to build a kernel which works on the first three.
+         default option is to build a kernel which works on PReP and CHRP.
 
-         Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
-         pSeries machine, a Power Macintosh (including iMacs, iBooks and
-         Powerbooks), or a PReP machine.
+         Note that support for Apple machines is now only available with
+         ARCH=powerpc, and has been removed from this menu.  If you wish
+         to build a kernel for an Apple machine, exit this configuration
+         process and re-run it with ARCH=powerpc.
+
+         Select CHRP/PReP if configuring for an IBM RS/6000 or
+         pSeries machine, or a PReP machine.
 
          Select Gemini if configuring for a Synergy Microsystems' Gemini
          series Single Board Computer.  More information is available at:
@@ -530,7 +512,7 @@ choice
          available at: <http://linux-apus.sourceforge.net/>.
 
 config PPC_MULTIPLATFORM
-       bool "CHRP/PowerMac/PReP"
+       bool "CHRP/PReP"
 
 config APUS
        bool "Amiga-APUS"
@@ -768,25 +750,14 @@ config CPM2
          on it (826x, 827x, 8560).
 
 config PPC_CHRP
-       bool
+       bool "Support for CHRP (Common Hardware Reference Platform) machines"
        depends on PPC_MULTIPLATFORM
        select PPC_I8259
        select PPC_INDIRECT_PCI
        default y
 
-config PPC_PMAC
-       bool
-       depends on PPC_MULTIPLATFORM
-       select PPC_INDIRECT_PCI
-       default y
-
-config PPC_PMAC64
-       bool
-       depends on PPC_PMAC && POWER4
-       default y
-
 config PPC_PREP
-       bool
+       bool "Support for PReP (PowerPC Reference Platform) machines"
        depends on PPC_MULTIPLATFORM
        select PPC_I8259
        select PPC_INDIRECT_PCI
@@ -794,7 +765,7 @@ config PPC_PREP
 
 config PPC_OF
        bool
-       depends on PPC_PMAC || PPC_CHRP
+       depends on PPC_CHRP
        default y
 
 config PPC_GEN550
@@ -1166,7 +1137,7 @@ config ISA
 
 config GENERIC_ISA_DMA
        bool
-       depends on POWER3 || POWER4 || 6xx && !CPM2
+       depends on POWER3 || 6xx && !CPM2
        default y
 
 config PPC_I8259