#GoodFET Chipcon SPI Client
# (C) 2011 Travis Goodspeed
+# Additions 2011-2012 Ryan Speers ryan@rmspeers.com
#N.B.,
#Might be CC2420 Specific
print "%s sniffdissect" % sys.argv[0];
print "\n%s txtoscount [-i|-r] TinyOS BlinkToLED" % sys.argv[0];
- print "%s reflexjam" % sys.argv[0];
+ print "%s reflexjam [channel=11] [delay=0]" % sys.argv[0];
sys.exit();
client.RF_setfreq(freq);
else:
client.RF_setchan(freq);
+ duration=0;
+ if len(sys.argv)>3:
+ duration=eval(sys.argv[3]);
client.CC_RFST_RX();
print "Reflexively jamming on %i MHz" % (client.RF_getfreq()/10**6);
#Now we let the firmware take over, watching for packets and jamming them.
+ #Standard reflexive jam is done with duration=0.
+ #To selectively jam packets that are above a certain length, set duration
+ # to the number of milliseconds needed to jam frames of that length.
+ # Api-Do project has script available to tune/test this duration.
+ # code.google.com/p/zigbeesecurity (rmspeers)
if sys.argv[1]=="reflexjam":
- client.RF_reflexjam();
+ client.RF_reflexjam(duration);
elif sys.argv[1]=="reflexjamack":
client.RF_reflexjam_autoack();
for foo in range(0,rssi>>2):
string=("%s."%string);
print "%02x %04i %s" % (rssi,rssi, string);
+
if(sys.argv[1]=="sniff" or sys.argv[1]=="sniffdissect"):
#Promiscuous mode.
client.RF_promiscuity(1);
if len(sys.argv)>2:
freq=eval(sys.argv[2]);
- if freq>100:
+ if freq>3000:
client.RF_setfreq(freq);
+ elif freq>100:
+ client.RF_setfreq(freq*1000000);
else:
client.RF_setchan(freq);
client.CC_RFST_RX();
else:
client.printpacket(packet);
sys.stdout.flush();
+
if(sys.argv[1]=="bsniff"):
#Just broadcast.
client.RF_promiscuity(0);
0xff, 0xff, 0xff, 0xff,
0xde, 0xad, 0xbe, 0xef,
0xba, 0xbe, 0xc0]);
+
if(sys.argv[1]=="txtoscount"):
'''
Clone of what TinyOS's RadioCountToLeds demo code does. Specify a
channel a TinyOS mote programmed with RadioCountToLeds is on, and
- this will act as the second device.
+ this will act as the second device. (ryan@rmspeers.com)
'''
if (len(sys.argv)<=3):
print "Provide -r to work via replays or -i to work via incrementing itself.";
0xff, 0xff, 0xff, 0xff,
]);
elif(sys.argv[1]=="txpipscapy"):
+ # NB: Requires Scapy with dot15d4.py layer. (rmspeers)
try:
from scapy.all import Dot15d4, Dot15d4FCS, Dot15d4Data, Raw
import struct
except ImportError:
- print "To use packet building, Scapy must be installed and have the dot15d4 extension present."
+ print "To use packet building, Scapy must be installed and have the dot15d4 layer present."
print "try: hg clone http://hg.secdev.org/scapy-com";
print " sudo ./setup.py install";
#Overall method is to build from the inner packet outwards in the pkt string
# Make inner packet
scapyinner = Dot15d4FCS(seqnum=130)/Dot15d4Data()/Raw('\xde\xad\xbe\xef');
- #pkt = str(scapyinner)[:-2] + '\xba\xbe\xc0';
pkt = str(scapyinner); #build inner pkt to bytes, adding FCS automatically
- #pkt = '\x0f'+pkt
pkt = struct.pack('b', len(pkt)) + pkt #prepend with its length
pkt = "\x00\x00\x00\x00\xA7" + pkt #add preamble and SFD to inner packet
# Make outer (wrapping) packet
client.RF_autocrc(1);
client.RF_txpacket(pkt)
-
if(sys.argv[1]=="peek"):
start=0x0000;
if(len(sys.argv)>2):