struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differenates displays type */
+ u32 display_port_attachment:4; /*This field differentiates the display type */
u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specifi */
+ u32 vendor_specific:4; /*Chipset Vendor Specific */
u32 bios_can_detect:1; /*BIOS can detect the device */
u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
the VGA device. */
struct acpi_device *dev;
struct acpi_video_device_brightness *brightness;
struct backlight_device *backlight;
- struct backlight_properties *data;
};
/* bus */
static int acpi_video_set_brightness(struct backlight_device *bd)
{
- int request_level = bd->props->brightness;
+ int request_level = bd->props.brightness;
struct acpi_video_device *vd =
(struct acpi_video_device *)class_get_devdata(&bd->class_dev);
acpi_video_device_lcd_set_level(vd, request_level);
return 0;
}
+static struct backlight_ops acpi_backlight_ops = {
+ .get_brightness = acpi_video_get_brightness,
+ .update_status = acpi_video_set_brightness,
+};
+
/* --------------------------------------------------------------------------
Video Management
-------------------------------------------------------------------------- */
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
- * active display output. No swich event.
+ * active display output. No switch event.
* 2. The _DGS value should be locked.
* 3. The system BIOS should not automatically switch (toggle) the
* active display output, but instead generate the display switch
* event notify code.
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
- * of the LCD, when the power changes from AC to DC
+ * of the LCD when the power changes from AC to DC
* 1. The system BIOS should NOT automatically control the brightness
- * level of the LCD, when the power changes from AC to DC.
+ * level of the LCD when the power changes from AC to DC.
* Return Value:
* -1 wrong arg.
*/
* Return Value:
* None
*
- * Find out all required AML method defined under the output
+ * Find out all required AML methods defined under the output
* device.
*/
unsigned long tmp;
static int count = 0;
char *name;
- struct backlight_properties *acpi_video_data;
-
name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
if (!name)
return;
- acpi_video_data = kzalloc(
- sizeof(struct backlight_properties),
- GFP_KERNEL);
- if (!acpi_video_data){
- kfree(name);
- return;
- }
- acpi_video_data->owner = THIS_MODULE;
- acpi_video_data->get_brightness =
- acpi_video_get_brightness;
- acpi_video_data->update_status =
- acpi_video_set_brightness;
sprintf(name, "acpi_video%d", count++);
- device->data = acpi_video_data;
- acpi_video_data->max_brightness = max_level;
acpi_video_device_lcd_get_level_current(device, &tmp);
- acpi_video_data->brightness = (int)tmp;
device->backlight = backlight_device_register(name,
- NULL, device, acpi_video_data);
+ NULL, device, &acpi_backlight_ops);
+ device->backlight->props.max_brightness = max_level;
+ device->backlight->props.brightness = (int)tmp;
+ backlight_update_status(device->backlight);
+
kfree(name);
}
return;
* Return Value:
* None
*
- * Find out all required AML method defined under the video bus device.
+ * Find out all required AML methods defined under the video bus device.
*/
static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
* to check well known required nodes.
*/
- /* Does this device able to support video switching ? */
+ /* Does this device support video switching? */
if (video->cap._DOS) {
video->flags.multihead = 1;
status = 0;
}
- /* Does this device able to retrieve a retrieve a video ROM ? */
+ /* Does this device support retrieving a video ROM? */
if (video->cap._ROM) {
video->flags.rom = 1;
status = 0;
}
- /* Does this device able to configure which video device to POST ? */
+ /* Does this device support configuring which video device to POST? */
if (video->cap._GPD && video->cap._SPD && video->cap._VPO) {
video->flags.post = 1;
status = 0;
if (level > 100)
return -EFAULT;
- /* validate though the list of available levels */
+ /* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
printk(KERN_WARNING PREFIX
"The motherboard VGA device is not listed as a possible POST device.\n");
printk(KERN_WARNING PREFIX
- "This indicate a BIOS bug. Please contact the manufacturer.\n");
+ "This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%lx\n", options);
- seq_printf(seq, "can POST: <intgrated video>");
+ seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
if (options & 4)
seq_printf(seq, "<not supported>\n");
goto end;
}
- seq_printf(seq, "device posted is <%s>\n", device_decode[id & 3]);
+ seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
end:
return 0;
if (opt > 3)
return -EFAULT;
- /* just in case an OEM 'forget' the motherboard... */
+ /* just in case an OEM 'forgot' the motherboard... */
options |= 1;
if (options & (1ul << opt)) {
/*
* Arg:
* video : video bus device
- * event : Nontify Event
+ * event : notify event
*
* Return:
* < 0 : error
*
* 1. Find out the current active output device.
- * 2. Identify the next output device to switch
+ * 2. Identify the next output device to switch to.
* 3. call _DSS to do actual switch.
*/
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- if (device->backlight){
- backlight_device_unregister(device->backlight);
- kfree(device->data);
- }
+ backlight_device_unregister(device->backlight);
return 0;
}
device = video->device;
switch (event) {
- case ACPI_VIDEO_NOTIFY_SWITCH: /* User request that a switch occur,
+ case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_event(device, event, 0);
break;
- case ACPI_VIDEO_NOTIFY_PROBE: /* User plug or remove a video
+ case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
projects / powerpc.git / blobdiff