libata-acpi: fix _GTF command protocol for ATAPI devices

[powerpc.git] / drivers / ata / pata_cmd64x.c

diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 15841a5..3989cc5 100644 (file)
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -1,5 +1,5 @@
 /*
- * pata_cmd64x.c       - ATI PATA for new ATA layer
+ * pata_cmd64x.c       - CMD64x PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
  *                       Alan Cox <alan@redhat.com>
  *
@@ -75,13 +75,7 @@ enum {
        DTPR1           = 0x7C
 };
 
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_port *ap)
        /* Check cable detect bits */
        pci_read_config_byte(pdev, BMIDECSR, &r);
        if (r & (1 << ap->port_no))
-               ap->cbl = ATA_CBL_PATA80;
-       else
-               ap->cbl = ATA_CBL_PATA40;
-
-       return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
-       return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+               return ATA_CBL_PATA80;
+       return ATA_CBL_PATA40;
 }
 
 /**
@@ -197,7 +178,7 @@ static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        static const u8 udma_data[] = {
-               0x31, 0x21, 0x11, 0x25, 0x15, 0x05
+               0x30, 0x20, 0x10, 0x20, 0x10, 0x00
        };
        static const u8 mwdma_data[] = {
                0x30, 0x20, 0x10
@@ -213,12 +194,21 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        pci_read_config_byte(pdev, pciD, &regD);
        pci_read_config_byte(pdev, pciU, &regU);
 
-       regD &= ~(0x20 << shift);
-       regU &= ~(0x35 << shift);
+       /* DMA bits off */
+       regD &= ~(0x20 << adev->devno);
+       /* DMA control bits */
+       regU &= ~(0x30 << shift);
+       /* DMA timing bits */
+       regU &= ~(0x05 << adev->devno);
 
-       if (adev->dma_mode >= XFER_UDMA_0)
+       if (adev->dma_mode >= XFER_UDMA_0) {
+               /* Merge thge timing value */
                regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
-       else
+               /* Merge the control bits */
+               regU |= 1 << adev->devno; /* UDMA on */
+               if (adev->dma_mode > 2) /* 15nS timing */
+                       regU |= 4 << adev->devno;
+       } else
                regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
 
        regD |= 0x20 << adev->devno;
@@ -239,8 +229,8 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
        struct ata_port *ap = qc->ap;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u8 dma_intr;
-       int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
-       int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+       int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+       int dma_reg = ap->port_no ? ARTTIM2 : CFR;
 
        ata_bmdma_stop(qc);
 
@@ -276,8 +266,10 @@ static struct scsi_host_template cmd64x_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
@@ -293,8 +285,9 @@ static struct ata_port_operations cmd64x_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd64x_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -304,14 +297,14 @@ static struct ata_port_operations cmd64x_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 static struct ata_port_operations cmd646r1_port_ops = {
@@ -327,8 +320,9 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd64x_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -338,14 +332,14 @@ static struct ata_port_operations cmd646r1_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 static struct ata_port_operations cmd648_port_ops = {
@@ -361,8 +355,9 @@ static struct ata_port_operations cmd648_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd648_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = cmd648_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -372,14 +367,14 @@ static struct ata_port_operations cmd648_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -470,6 +465,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        return ata_pci_init_one(pdev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 static int cmd64x_reinit_one(struct pci_dev *pdev)
 {
        u8 mrdmode;
@@ -483,6 +479,7 @@ static int cmd64x_reinit_one(struct pci_dev *pdev)
 #endif
        return ata_pci_device_resume(pdev);
 }
+#endif
 
 static const struct pci_device_id cmd64x[] = {
        { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
@@ -498,8 +495,10 @@ static struct pci_driver cmd64x_pci_driver = {
        .id_table       = cmd64x,
        .probe          = cmd64x_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = cmd64x_reinit_one,
+#endif
 };
 
 static int __init cmd64x_init(void)