libata-acpi: fix _GTF command protocol for ATAPI devices
[powerpc.git] / drivers / ata / pata_cmd64x.c
index da09828..3989cc5 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * pata_cmd64x.c       - ATI PATA for new ATA layer
+ * pata_cmd64x.c       - CMD64x PATA for new ATA layer
  *                       (C) 2005 Red Hat Inc
  *                       Alan Cox <alan@redhat.com>
  *
@@ -75,13 +75,7 @@ enum {
        DTPR1           = 0x7C
 };
 
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_port *ap)
        /* Check cable detect bits */
        pci_read_config_byte(pdev, BMIDECSR, &r);
        if (r & (1 << ap->port_no))
-               ap->cbl = ATA_CBL_PATA80;
-       else
-               ap->cbl = ATA_CBL_PATA40;
-
-       return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
-       return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+               return ATA_CBL_PATA80;
+       return ATA_CBL_PATA40;
 }
 
 /**
@@ -285,8 +266,10 @@ static struct scsi_host_template cmd64x_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
@@ -302,8 +285,9 @@ static struct ata_port_operations cmd64x_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd64x_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -336,8 +320,9 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd64x_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -370,8 +355,9 @@ static struct ata_port_operations cmd648_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cmd648_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = cmd648_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -479,6 +465,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        return ata_pci_init_one(pdev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 static int cmd64x_reinit_one(struct pci_dev *pdev)
 {
        u8 mrdmode;
@@ -492,6 +479,7 @@ static int cmd64x_reinit_one(struct pci_dev *pdev)
 #endif
        return ata_pci_device_resume(pdev);
 }
+#endif
 
 static const struct pci_device_id cmd64x[] = {
        { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
@@ -507,8 +495,10 @@ static struct pci_driver cmd64x_pci_driver = {
        .id_table       = cmd64x,
        .probe          = cmd64x_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = cmd64x_reinit_one,
+#endif
 };
 
 static int __init cmd64x_init(void)