libata: add deadline support to prereset and reset methods

[powerpc.git] / drivers / ata / pata_hpt366.c

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 27d724b..e64e05e 100644 (file)
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "pata_hpt366"
-#define DRV_VERSION    "0.5.3"
+#define DRV_VERSION    "0.6.1"
 
 struct hpt_clock {
        u8      xfer_speed;
@@ -169,13 +169,12 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
 
 /**
  *     hpt366_filter   -       mode selection filter
- *     @ap: ATA interface
  *     @adev: ATA device
  *
  *     Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 {
        if (adev->class == ATA_DEV_ATA) {
                if (hpt_dma_blacklisted(adev, "UDMA",  bad_ata33))
@@ -185,7 +184,7 @@ static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device
                if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
                        mask &= ~(0x0F << ATA_SHIFT_UDMA);
        }
-       return ata_pci_default_filter(ap, adev, mask);
+       return ata_pci_default_filter(adev, mask);
 }
 
 /**
@@ -210,25 +209,29 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
        return 0xffffffffU;     /* silence compiler warning */
 }
 
-static int hpt36x_pre_reset(struct ata_port *ap)
+static int hpt36x_cable_detect(struct ata_port *ap)
+{
+       u8 ata66;
+       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+       pci_read_config_byte(pdev, 0x5A, &ata66);
+       if (ata66 & (1 << ap->port_no))
+               return ATA_CBL_PATA40;
+       return ATA_CBL_PATA80;
+}
+
+static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline)
 {
        static const struct pci_bits hpt36x_enable_bits[] = {
                { 0x50, 1, 0x04, 0x04 },
                { 0x54, 1, 0x04, 0x04 }
        };
-
-       u8 ata66;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
        if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       pci_read_config_byte(pdev, 0x5A, &ata66);
-       if (ata66 & (1 << ap->port_no))
-               ap->cbl = ATA_CBL_PATA40;
-       else
-               ap->cbl = ATA_CBL_PATA80;
-       return ata_std_prereset(ap);
+       return ata_std_prereset(ap, deadline);
 }
 
 /**
@@ -328,8 +331,10 @@ static struct scsi_host_template hpt36x_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 /*
@@ -352,6 +357,7 @@ static struct ata_port_operations hpt366_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = hpt36x_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = hpt36x_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -457,12 +463,13 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        return ata_pci_init_one(dev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 static int hpt36x_reinit_one(struct pci_dev *dev)
 {
        hpt36x_init_chipset(dev);
        return ata_pci_device_resume(dev);
 }
-
+#endif
 
 static const struct pci_device_id hpt36x[] = {
        { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
@@ -474,8 +481,10 @@ static struct pci_driver hpt36x_pci_driver = {
        .id_table       = hpt36x,
        .probe          = hpt36x_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = hpt36x_reinit_one,
+#endif
 };
 
 static int __init hpt36x_init(void)