#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.3.3"
enum {
HPT_PCI_FAST = (1 << 31),
}
/**
- * hpt3x2n_pre_reset - reset the hpt3x2n bus
- * @ap: ATA port to reset
+ * hpt3x2n_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
*
- * Perform the initial reset handling for the 3x2n series controllers.
- * Reset the hardware and state machine, obtain the cable type.
+ * Return the cable type attached to this port
*/
-static int hpt3xn_pre_reset(struct ata_port *ap)
+static int hpt3x2n_cable_detect(struct ata_port *ap)
{
u8 scr2, ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_write_config_byte(pdev, 0x5B, scr2);
if (ata66 & (1 << ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
+ return ATA_CBL_PATA40;
else
- ap->cbl = ATA_CBL_PATA80;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * hpt3x2n_pre_reset - reset the hpt3x2n bus
+ * @ap: ATA port to reset
+ *
+ * Perform the initial reset handling for the 3x2n series controllers.
+ * Reset the hardware and state machine,
+ */
+static int hpt3xn_pre_reset(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50, 0x37);
pci_write_config_byte(pdev, 0x54, 0x37);
udelay(100);
-
return ata_std_prereset(ap);
}
static void hpt3x2n_set_clock(struct ata_port *ap, int source)
{
- unsigned long bmdma = ap->ioaddr.bmdma_addr;
+ void __iomem *bmdma = ap->ioaddr.bmdma_addr;
/* Tristate the bus */
- outb(0x80, bmdma+0x73);
- outb(0x80, bmdma+0x77);
+ iowrite8(0x80, bmdma+0x73);
+ iowrite8(0x80, bmdma+0x77);
/* Switch clock and reset channels */
- outb(source, bmdma+0x7B);
- outb(0xC0, bmdma+0x79);
+ iowrite8(source, bmdma+0x7B);
+ iowrite8(0xC0, bmdma+0x79);
/* Reset state machines */
- outb(0x37, bmdma+0x70);
- outb(0x37, bmdma+0x74);
+ iowrite8(0x37, bmdma+0x70);
+ iowrite8(0x37, bmdma+0x74);
/* Complete reset */
- outb(0x00, bmdma+0x79);
+ iowrite8(0x00, bmdma+0x79);
/* Reconnect channels to bus */
- outb(0x00, bmdma+0x73);
- outb(0x00, bmdma+0x77);
+ iowrite8(0x00, bmdma+0x73);
+ iowrite8(0x00, bmdma+0x77);
}
/* Check if our partner interface is busy */
return 0;
}
-static int hpt3x2n_use_dpll(struct ata_port *ap, int reading)
+static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
{
long flags = (long)ap->host->private_data;
/* See if we should use the DPLL */
- if (reading == 0)
+ if (writing)
return USE_DPLL; /* Needed for write */
if (flags & PCI66)
return USE_DPLL; /* Needed at 66Mhz */
.thaw = ata_bmdma_thaw,
.error_handler = hpt3x2n_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = hpt3x2n_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.qc_prep = ata_qc_prep,
.qc_issue = hpt3x2n_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_irq_ack,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
};
/**