and changed files

[powerpc.git] / drivers / ata / pata_hpt3x3.c

diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 5f1d385..ac28ec8 100644 (file)
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -25,25 +25,6 @@
 #define DRV_NAME       "pata_hpt3x3"
 #define DRV_VERSION    "0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-/**
- *     hpt3x3_probe_reset      -       reset the hpt3x3 bus
- *     @ap: ATA port to reset
- *
- *     Perform the housekeeping when doing an ATA bus reeset. We just
- *     need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-       return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *     hpt3x3_set_piomode              -       PIO setup
  *     @ap: ATA interface
@@ -119,8 +100,10 @@ static struct scsi_host_template hpt3x3_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
@@ -137,8 +120,9 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = hpt3x3_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -148,14 +132,14 @@ static struct ata_port_operations hpt3x3_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 /**
@@ -164,7 +148,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
  *
  *     Perform the setup required at boot and on resume.
  */
- 
+
 static void hpt3x3_init_chipset(struct pci_dev *dev)
 {
        u16 cmd;
@@ -206,11 +190,13 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
        return ata_pci_init_one(dev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 static int hpt3x3_reinit_one(struct pci_dev *dev)
 {
        hpt3x3_init_chipset(dev);
        return ata_pci_device_resume(dev);
 }
+#endif
 
 static const struct pci_device_id hpt3x3[] = {
        { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
@@ -223,8 +209,10 @@ static struct pci_driver hpt3x3_pci_driver = {
        .id_table       = hpt3x3,
        .probe          = hpt3x3_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = hpt3x3_reinit_one,
+#endif
 };
 
 static int __init hpt3x3_init(void)