libata: add missing PM callbacks

[powerpc.git] / drivers / ata / pata_jmicron.c

diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 2d661cb..7ede323 100644 (file)
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -137,6 +137,10 @@ static struct scsi_host_template jmicron_sht = {
        .slave_destroy          = ata_scsi_slave_destroy,
        /* Use standard CHS mapping rules */
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
+       .suspend                = ata_scsi_device_suspend,
+       .resume                 = ata_scsi_device_resume,
+#endif
 };
 
 static const struct ata_port_operations jmicron_ops = {
@@ -161,16 +165,16 @@ static const struct ata_port_operations jmicron_ops = {
        .bmdma_status           = ata_bmdma_status,
        .qc_prep                = ata_qc_prep,
        .qc_issue               = ata_qc_issue_prot,
-       .data_xfer              = ata_pio_data_xfer,
+       .data_xfer              = ata_data_xfer,
 
        /* IRQ-related hooks */
        .irq_handler            = ata_interrupt,
        .irq_clear              = ata_bmdma_irq_clear,
+       .irq_on                 = ata_irq_on,
+       .irq_ack                = ata_irq_ack,
 
        /* Generic PATA PCI ATA helpers */
        .port_start             = ata_port_start,
-       .port_stop              = ata_port_stop,
-       .host_stop              = ata_host_stop,
 };
 
 
@@ -202,57 +206,20 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
        };
        struct ata_port_info *port_info[2] = { &info, &info };
 
-       u32 reg;
-
-       if (id->driver_data != 368) {
-               /* Put the controller into AHCI mode in case the AHCI driver
-                  has not yet been loaded. This can be done with either
-                  function present */
-
-               /* FIXME: We may want a way to override this in future */
-               pci_write_config_byte(pdev, 0x41, 0xa1);
-
-               /* PATA controller is fn 1, AHCI is fn 0 */
-               if (PCI_FUNC(pdev->devfn) != 1)
-                       return -ENODEV;
-       }
-       if ( id->driver_data == 365 || id->driver_data == 366) {
-               /* The 365/66 have two PATA channels, redirect the second */
-               pci_read_config_dword(pdev, 0x80, &reg);
-               reg |= (1 << 24);       /* IDE1 to PATA IDE secondary */
-               pci_write_config_dword(pdev, 0x80, reg);
-       }
-
        return ata_pci_init_one(pdev, port_info, 2);
 }
 
-static int jmicron_reinit_one(struct pci_dev *pdev)
-{
-       u32 reg;
-       
-       switch(pdev->device) {
-               case PCI_DEVICE_ID_JMICRON_JMB368:
-                       break;
-               case PCI_DEVICE_ID_JMICRON_JMB365:
-               case PCI_DEVICE_ID_JMICRON_JMB366:
-                       /* Restore mapping or disks swap and boy does it get ugly */
-                       pci_read_config_dword(pdev, 0x80, &reg);
-                       reg |= (1 << 24);       /* IDE1 to PATA IDE secondary */
-                       pci_write_config_dword(pdev, 0x80, reg);
-                       /* Fall through */
-               default:
-                       /* Make sure AHCI is turned back on */
-                       pci_write_config_byte(pdev, 0x41, 0xa1);
-       }
-       return ata_pci_device_resume(pdev);
-}
-
 static const struct pci_device_id jmicron_pci_tbl[] = {
-       { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
-       { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363},
-       { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 365},
-       { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 366},
-       { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 368},
+       { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
+         PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 361 },
+       { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
+         PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 363 },
+       { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
+         PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 365 },
+       { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
+         PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 366 },
+       { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
+         PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 368 },
 
        { }     /* terminate list */
 };
@@ -263,7 +230,7 @@ static struct pci_driver jmicron_pci_driver = {
        .probe                  = jmicron_init_one,
        .remove                 = ata_pci_remove_one,
        .suspend                = ata_pci_device_suspend,
-       .resume                 = jmicron_reinit_one,
+       .resume                 = ata_pci_device_resume,
 };
 
 static int __init jmicron_init(void)