#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
#define NR_HOST 6
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
-static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 };
+static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
struct legacy_data {
unsigned long timing;
static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
+static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
* legacy_set_mode - mode setting
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev)) {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .cable_detect = ata_cable_40wire,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = opti82c46x_qc_issue_prot,
static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
{
struct legacy_data *ld = &legacy_data[nr_legacy_host];
- struct ata_probe_ent ae;
+ struct ata_host *host;
+ struct ata_port *ap;
struct platform_device *pdev;
struct ata_port_operations *ops = &legacy_port_ops;
void __iomem *io_addr, *ctrl_addr;
int pio_modes = pio_mask;
u32 mask = (1 << port);
+ u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
int ret;
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
if (ht6560a & mask) {
ops = &ht6560a_port_ops;
pio_modes = 0x07;
+ iordy = ATA_FLAG_NO_IORDY;
}
if (ht6560b & mask) {
ops = &ht6560b_port_ops;
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
pio_modes = 0x07;
ops = &pdc20230_port_ops;
+ iordy = ATA_FLAG_NO_IORDY;
udelay(100);
inb(0x1F5);
} else {
/* Chip does mode setting by command snooping */
if (ops == &legacy_port_ops && (autospeed & mask))
ops = &simple_port_ops;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &pdev->dev;
- ae.port_ops = ops;
- ae.sht = &legacy_sht;
- ae.n_ports = 1;
- ae.pio_mask = pio_modes;
- ae.irq = irq;
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
- ae.port[0].cmd_addr = io_addr;
- ae.port[0].altstatus_addr = ctrl_addr;
- ae.port[0].ctl_addr = ctrl_addr;
- ata_std_ports(&ae.port[0]);
- ae.private_data = ld;
-
- ret = -ENODEV;
- if (!ata_device_add(&ae))
+
+ ret = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto fail;
+ ap = host->ports[0];
+
+ ap->ops = ops;
+ ap->pio_mask = pio_modes;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->ioaddr.cmd_addr = io_addr;
+ ap->ioaddr.altstatus_addr = ctrl_addr;
+ ap->ioaddr.ctl_addr = ctrl_addr;
+ ata_std_ports(&ap->ioaddr);
+ ap->private_data = ld;
+
+ ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+ if (ret)
goto fail;
legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(pio_mask, int, 0);
+module_param(iordy_mask, int, 0);
module_init(legacy_init);
module_exit(legacy_exit);