USB: update gadget files for fsl_usb2_udc driver

[powerpc.git] / drivers / ata / pata_rz1000.c

diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 3677c64..f522daa 100644 (file)
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -52,26 +52,29 @@ static void rz1000_error_handler(struct ata_port *ap)
 /**
  *     rz1000_set_mode         -       mode setting function
  *     @ap: ATA interface
+ *     @unused: returned device on set_mode failure
  *
  *     Use a non standard set_mode function. We don't want to be tuned. We
  *     would prefer to be BIOS generic but for the fact our hardware is
  *     whacked out.
  */
 
-static void rz1000_set_mode(struct ata_port *ap)
+static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
 {
        int i;
 
        for (i = 0; i < ATA_MAX_DEVICES; i++) {
                struct ata_device *dev = &ap->device[i];
-               if (ata_dev_enabled(dev)) {
+               if (ata_dev_ready(dev)) {
                        /* We don't really care */
                        dev->pio_mode = XFER_PIO_0;
                        dev->xfer_mode = XFER_PIO_0;
                        dev->xfer_shift = ATA_SHIFT_PIO;
                        dev->flags |= ATA_DFLAG_PIO;
+                       ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
                }
        }
+       return 0;
 }
 
 
@@ -91,8 +94,10 @@ static struct scsi_host_template rz1000_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations rz1000_port_ops = {
@@ -105,8 +110,6 @@ static struct ata_port_operations rz1000_port_ops = {
        .exec_command   = ata_exec_command,
        .dev_select     = ata_std_dev_select,
 
-       .error_handler  = rz1000_error_handler,
-
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
        .bmdma_stop     = ata_bmdma_stop,
@@ -115,7 +118,7 @@ static struct ata_port_operations rz1000_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
@@ -124,10 +127,10 @@ static struct ata_port_operations rz1000_port_ops = {
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 static int rz1000_fifo_disable(struct pci_dev *pdev)
@@ -177,6 +180,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
        return -ENODEV;
 }
 
+#ifdef CONFIG_PM
 static int rz1000_reinit_one(struct pci_dev *pdev)
 {
        /* If this fails on resume (which is a "cant happen" case), we
@@ -185,6 +189,7 @@ static int rz1000_reinit_one(struct pci_dev *pdev)
                panic("rz1000 fifo");
        return ata_pci_device_resume(pdev);
 }
+#endif
 
 static const struct pci_device_id pata_rz1000[] = {
        { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
@@ -198,8 +203,10 @@ static struct pci_driver rz1000_pci_driver = {
        .id_table       = pata_rz1000,
        .probe          = rz1000_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = rz1000_reinit_one,
+#endif
 };
 
 static int __init rz1000_init(void)