libata-acpi: fix _GTF command protocol for ATAPI devices

[powerpc.git] / drivers / ata / pata_via.c

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 946ade0..362beb2 100644 (file)
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.3.1"
 
 /*
  *     The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -135,19 +135,26 @@ static const struct via_isa_bridge {
  */
 
 static int via_cable_detect(struct ata_port *ap) {
+       const struct via_isa_bridge *config = ap->host->private_data;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        u32 ata66;
 
+       /* Early chips are 40 wire */
+       if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
+               return ATA_CBL_PATA40;
+       /* UDMA 66 chips have only drive side logic */
+       else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+               return ATA_CBL_PATA_UNK;
+       /* UDMA 100 or later */
        pci_read_config_dword(pdev, 0x50, &ata66);
        /* Check both the drive cable reporting bits, we might not have
           two drives */
        if (ata66 & (0x10100000 >> (16 * ap->port_no)))
                return ATA_CBL_PATA80;
-       else
-               return ATA_CBL_PATA40;
+       return ATA_CBL_PATA40;
 }
 
-static int via_pre_reset(struct ata_port *ap)
+static int via_pre_reset(struct ata_port *ap, unsigned long deadline)
 {
        const struct via_isa_bridge *config = ap->host->private_data;
 
@@ -156,23 +163,12 @@ static int via_pre_reset(struct ata_port *ap)
                        { 0x40, 1, 0x02, 0x02 },
                        { 0x40, 1, 0x01, 0x01 }
                };
-
                struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
                if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
                        return -ENOENT;
        }
 
-       if ((config->flags & VIA_UDMA) >= VIA_UDMA_100)
-               ap->cbl = via_cable_detect(ap);
-       /* The UDMA66 series has no cable detect so do drive side detect */
-       else if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
-               ap->cbl = ATA_CBL_PATA40;
-       else
-               ap->cbl = ATA_CBL_PATA_UNK;
-
-
-       return ata_std_prereset(ap);
+       return ata_std_prereset(ap, deadline);
 }
 
 
@@ -327,6 +323,7 @@ static struct ata_port_operations via_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = via_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = via_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -362,6 +359,7 @@ static struct ata_port_operations via_port_ops_noirq = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = via_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = via_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,