libata: kernel-doc fix

[powerpc.git] / drivers / ata / pata_via.c

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index f0b6c3b..946ade0 100644 (file)
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -170,7 +170,7 @@ static int via_pre_reset(struct ata_port *ap)
                ap->cbl = ATA_CBL_PATA40;
        else
                ap->cbl = ATA_CBL_PATA_UNK;
-               
+
 
        return ata_std_prereset(ap);
 }
@@ -305,8 +305,10 @@ static struct scsi_host_template via_sht = {
        .slave_configure        = ata_scsi_slave_config,
        .slave_destroy          = ata_scsi_slave_destroy,
        .bios_param             = ata_std_bios_param,
+#ifdef CONFIG_PM
        .resume                 = ata_scsi_device_resume,
        .suspend                = ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations via_port_ops = {
@@ -334,14 +336,14 @@ static struct ata_port_operations via_port_ops = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer,
+       .data_xfer      = ata_data_xfer,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
@@ -369,14 +371,14 @@ static struct ata_port_operations via_port_ops_noirq = {
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
 
-       .data_xfer      = ata_pio_data_xfer_noirq,
+       .data_xfer      = ata_data_xfer_noirq,
 
        .irq_handler    = ata_interrupt,
        .irq_clear      = ata_bmdma_irq_clear,
+       .irq_on         = ata_irq_on,
+       .irq_ack        = ata_irq_ack,
 
        .port_start     = ata_port_start,
-       .port_stop      = ata_port_stop,
-       .host_stop      = ata_host_stop
 };
 
 /**
@@ -391,11 +393,11 @@ static struct ata_port_operations via_port_ops_noirq = {
 static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
 {
        u8 enable;
-       
+
        /* 0x40 low bits indicate enabled channels */
        pci_read_config_byte(pdev, 0x40 , &enable);
        enable &= 3;
-       
+
        if (flags & VIA_SET_FIFO) {
                static const u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
                u8 fifo;
@@ -516,7 +518,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
        /* Initialise the FIFO for the enabled channels. */
        via_config_fifo(pdev, config->flags);
-       
+
        /* Clock set up */
        switch(config->flags & VIA_UDMA) {
                case VIA_UDMA_NONE:
@@ -560,6 +562,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
        return ata_pci_init_one(pdev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 /**
  *     via_reinit_one          -       reinit after resume
  *     @pdev; PCI device
@@ -575,7 +578,7 @@ static int via_reinit_one(struct pci_dev *pdev)
        u32 timing;
        struct ata_host *host = dev_get_drvdata(&pdev->dev);
        const struct via_isa_bridge *config = host->private_data;
-       
+
        via_config_fifo(pdev, config->flags);
 
        if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
@@ -590,8 +593,9 @@ static int via_reinit_one(struct pci_dev *pdev)
                timing &= ~0x80008;
                pci_write_config_dword(pdev, 0x50, timing);
        }
-       return ata_pci_device_resume(pdev);     
+       return ata_pci_device_resume(pdev);
 }
+#endif
 
 static const struct pci_device_id via[] = {
        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), },
@@ -607,8 +611,10 @@ static struct pci_driver via_pci_driver = {
        .id_table       = via,
        .probe          = via_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
        .suspend        = ata_pci_device_suspend,
        .resume         = via_reinit_one,
+#endif
 };
 
 static int __init via_init(void)