#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.1"
+#define DRV_VERSION "2.2"
enum {
SIL_MMIO_BAR = 5,
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
+static void sil_dev_config(struct ata_device *dev);
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static void sil_post_set_mode (struct ata_port *ap);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance);
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
static void sil_freeze(struct ata_port *ap);
static void sil_thaw(struct ata_port *ap);
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .post_set_mode = sil_post_set_mode,
+ .set_mode = sil_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.thaw = sil_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = sil_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
},
/* sil_3112_no_sata_irq */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
.pio_mask = 0x1f, /* pio0-4 */
},
/* sil_3512 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
},
/* sil_3114 */
{
- .sht = &sil_sht,
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
return cache_line;
}
-static void sil_post_set_mode (struct ata_port *ap)
+/**
+ * sil_set_mode - wrap set_mode functions
+ * @ap: port to set up
+ * @r_failed: returned device when we fail
+ *
+ * Wrap the libata method for device setup as after the setup we need
+ * to inspect the results and do some configuration work
+ */
+
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
{
struct ata_host *host = ap->host;
struct ata_device *dev;
void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
u32 tmp, dev_mode[2];
unsigned int i;
+ int rc;
+
+ rc = ata_do_set_mode(ap, r_failed);
+ if (rc)
+ return rc;
for (i = 0; i < 2; i++) {
dev = &ap->device[i];
tmp |= (dev_mode[1] << 4);
writel(tmp, addr);
readl(addr); /* flush */
+ return 0;
}
static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
/**
* sil_dev_config - Apply device/host-specific errata fixups
- * @ap: Port containing device to be examined
* @dev: Device to be examined
*
* After the IDENTIFY [PACKET] DEVICE step is complete, and a
* appreciated.
* - But then again UDMA5 is hardly anything to complain about
*/
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil_dev_config(struct ata_device *dev)
{
+ struct ata_port *ap = dev->ap;
int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
unsigned int n, quirks = 0;
unsigned char model_num[ATA_ID_PROD_LEN + 1];
}
}
-static void sil_init_controller(struct pci_dev *pdev,
- int n_ports, unsigned long port_flags,
- void __iomem *mmio_base)
+static void sil_init_controller(struct ata_host *host)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
u8 cls;
u32 tmp;
int i;
if (cls) {
cls >>= 3;
cls++; /* cls = (line_size/8)+1 */
- for (i = 0; i < n_ports; i++)
+ for (i = 0; i < host->n_ports; i++)
writew(cls << 8 | cls,
mmio_base + sil_port[i].fifo_cfg);
} else
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
- if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
int cnt;
- for (i = 0, cnt = 0; i < n_ports; i++) {
+ for (i = 0, cnt = 0; i < host->n_ports; i++) {
tmp = readl(mmio_base + sil_port[i].sfis_cfg);
if ((tmp & 0x3) != 0x01)
continue;
}
}
- if (n_ports == 4) {
+ if (host->n_ports == 4) {
/* flip the magic "make 4 ports work" bit */
tmp = readl(mmio_base + sil_port[2].bmdma);
if ((tmp & SIL_INTR_STEERING) == 0)
static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct device *dev = &pdev->dev;
- struct ata_probe_ent *probe_ent;
+ int board_id = ent->driver_data;
+ const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+ struct ata_host *host;
void __iomem *mmio_base;
- int rc;
+ int n_ports, rc;
unsigned int i;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* allocate host */
+ n_ports = 2;
+ if (board_id == sil_3114)
+ n_ports = 4;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
pcim_pin_device(pdev);
if (rc)
return rc;
+ host->iomap = pcim_iomap_table(pdev);
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
if (rc)
return rc;
- probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
+ mmio_base = host->iomap[SIL_MMIO_BAR];
- INIT_LIST_HEAD(&probe_ent->node);
- probe_ent->dev = pci_dev_to_dev(pdev);
- probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
- probe_ent->sht = sil_port_info[ent->driver_data].sht;
- probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
- probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
- probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
- probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->port_flags = sil_port_info[ent->driver_data].flags;
-
- probe_ent->iomap = pcim_iomap_table(pdev);
-
- mmio_base = probe_ent->iomap[SIL_MMIO_BAR];
-
- for (i = 0; i < probe_ent->n_ports; i++) {
- probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf;
- probe_ent->port[i].altstatus_addr =
- probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl;
- probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma;
- probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr;
- ata_std_ports(&probe_ent->port[i]);
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+ ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
+ ioaddr->altstatus_addr =
+ ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
+ ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
+ ioaddr->scr_addr = mmio_base + sil_port[i].scr;
+ ata_std_ports(ioaddr);
}
- sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
- mmio_base);
+ /* initialize and activate */
+ sil_init_controller(host);
pci_set_master(pdev);
-
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(dev, probe_ent);
- return 0;
+ return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
+ &sil_sht);
}
#ifdef CONFIG_PM
if (rc)
return rc;
- sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
- host->iomap[SIL_MMIO_BAR]);
+ sil_init_controller(host);
ata_host_resume(host);
return 0;
projects / powerpc.git / blobdiff