#include "tpm.h"
/* National definitions */
-enum tpm_nsc_addr {
- TPM_NSC_BASE = 0x360,
- TPM_NSC_IRQ = 0x07
+enum tpm_nsc_addr{
+ TPM_NSC_IRQ = 0x07,
+ TPM_NSC_BASE0_HI = 0x60,
+ TPM_NSC_BASE0_LO = 0x61,
+ TPM_NSC_BASE1_HI = 0x62,
+ TPM_NSC_BASE1_LO = 0x63
};
enum tpm_nsc_index {
};
/* status bits */
-enum tpm_nsc_status{
+enum tpm_nsc_status {
NSC_STATUS_OBF = 0x01, /* output buffer full */
NSC_STATUS_IBF = 0x02, /* input buffer full */
NSC_STATUS_F0 = 0x04, /* F0 */
NSC_STATUS_RDY = 0x10, /* ready to receive command */
NSC_STATUS_IBR = 0x20 /* ready to receive data */
};
+
/* command bits */
enum tpm_nsc_cmd_mode {
NSC_COMMAND_NORMAL = 0x01, /* normal mode */
*p = inb(chip->vendor->base + NSC_DATA);
}
- if ((data & NSC_STATUS_F0) == 0) {
+ if ((data & NSC_STATUS_F0) == 0 &&
+ (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
dev_err(&chip->pci_dev->dev, "F0 not set\n");
return -EIO;
}
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.req_canceled = NSC_STATUS_RDY,
- .base = TPM_NSC_BASE,
.attr_group = &nsc_attr_grp,
.miscdev = { .fops = &nsc_ops, },
};
const struct pci_device_id *pci_id)
{
int rc = 0;
+ int lo, hi;
+ int nscAddrBase = TPM_ADDR;
+
if (pci_enable_device(pci_dev))
return -EIO;
- if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
- rc = -ENODEV;
- goto out_err;
- }
+ /* select PM channel 1 */
+ tpm_write_index(nscAddrBase,NSC_LDN_INDEX, 0x12);
/* verify that it is a National part (SID) */
- if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
- rc = -ENODEV;
- goto out_err;
+ if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
+ nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
+ (tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
+ if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) {
+ rc = -ENODEV;
+ goto out_err;
+ }
}
+ hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
+ lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
+ tpm_nsc.base = (hi<<8) | lo;
+
dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
dev_dbg(&pci_dev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
- tpm_read_index(0x07), tpm_read_index(0x20),
- tpm_read_index(0x27));
+ tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
+ tpm_read_index(nscAddrBase,0x27));
dev_dbg(&pci_dev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
- tpm_read_index(0x21), tpm_read_index(0x25),
- tpm_read_index(0x26), tpm_read_index(0x28));
+ tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
+ tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
- (tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
+ (tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
- (tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
+ (tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
- tpm_read_index(0x70));
+ tpm_read_index(nscAddrBase,0x70));
dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
- tpm_read_index(0x71));
+ tpm_read_index(nscAddrBase,0x71));
dev_dbg(&pci_dev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
- tpm_read_index(0x74), tpm_read_index(0x75));
+ tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
dev_dbg(&pci_dev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
- tpm_read_index(0xF0), tpm_read_index(0xF1),
- tpm_read_index(0xF2), tpm_read_index(0xF3),
- tpm_read_index(0xF4), tpm_read_index(0xF5),
- tpm_read_index(0xF6), tpm_read_index(0xF7),
- tpm_read_index(0xF8), tpm_read_index(0xF9));
+ tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
+ tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
+ tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
+ tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
+ tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
dev_info(&pci_dev->dev,
- "NSC PC21100 TPM revision %d\n",
- tpm_read_index(0x27) & 0x1F);
-
- if (tpm_read_index(NSC_LDC_INDEX) == 0)
- dev_info(&pci_dev->dev, ": NSC TPM not active\n");
-
- /* select PM channel 1 */
- tpm_write_index(NSC_LDN_INDEX, 0x12);
- tpm_read_index(NSC_LDN_INDEX);
-
- /* disable the DPM module */
- tpm_write_index(NSC_LDC_INDEX, 0);
- tpm_read_index(NSC_LDC_INDEX);
-
- /* set the data register base addresses */
- tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
- tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
- tpm_read_index(NSC_DIO_INDEX);
- tpm_read_index(NSC_DIO_INDEX + 1);
-
- /* set the command register base addresses */
- tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
- tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
- tpm_read_index(NSC_DIO_INDEX);
- tpm_read_index(NSC_DIO_INDEX + 1);
-
- /* set the interrupt number to be used for the host interface */
- tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
- tpm_write_index(NSC_ITS_INDEX, 0x00);
- tpm_read_index(NSC_IRQ_INDEX);
+ "NSC TPM revision %d\n",
+ tpm_read_index(nscAddrBase, 0x27) & 0x1F);
/* enable the DPM module */
- tpm_write_index(NSC_LDC_INDEX, 0x01);
- tpm_read_index(NSC_LDC_INDEX);
+ tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
goto out_err;
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0)},
{PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
{0,}
};
projects / powerpc.git / blobdiff