* More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
*/
-#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
#include <linux/module.h> /* For module specific items */
#include <linux/moduleparam.h> /* For new moduleparam's */
#include <linux/types.h> /* For standard types (like size_t) */
#include <linux/fs.h> /* For file operations */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
-#include <linux/sched.h> /* TASK_INTERRUPTIBLE, set_current_state() and friends */
-#include <linux/slab.h> /* For kmalloc */
#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
-#define WD_VER "1.16 (03/01/2006)"
-#define PFX "pcwd: "
+#define WATCHDOG_VERSION "1.17"
+#define WATCHDOG_DATE "12 Feb 2006"
+#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
+#define WATCHDOG_NAME "pcwd"
+#define PFX WATCHDOG_NAME ": "
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
+#define WD_VER WATCHDOG_VERSION " (" WATCHDOG_DATE ")"
/*
* It should be noted that PCWD_REVISION_B was removed because A and B
* PCI-PC Watchdog card.
*/
/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
-#define WD_WDRST 0x01 /* Previously reset state */
-#define WD_T110 0x02 /* Temperature overheat sense */
-#define WD_HRTBT 0x04 /* Heartbeat sense */
-#define WD_RLY2 0x08 /* External relay triggered */
-#define WD_SRLY2 0x80 /* Software external relay triggered */
+#define WD_WDRST 0x01 /* Previously reset state */
+#define WD_T110 0x02 /* Temperature overheat sense */
+#define WD_HRTBT 0x04 /* Heartbeat sense */
+#define WD_RLY2 0x08 /* External relay triggered */
+#define WD_SRLY2 0x80 /* Software external relay triggered */
/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
-#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
-#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
-#define WD_REVC_TTRP 0x04 /* Temperature Trip status */
+#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
+#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
+#define WD_REVC_TTRP 0x04 /* Temperature Trip status */
+#define WD_REVC_RL2A 0x08 /* Relay 2 activated by on-board processor */
+#define WD_REVC_RL1A 0x10 /* Relay 1 active */
+#define WD_REVC_R2DS 0x40 /* Relay 2 disable */
+#define WD_REVC_RLY2 0x80 /* Relay 2 activated? */
/* Port 2 : Control Status #2 */
#define WD_WDIS 0x10 /* Watchdog Disabled */
#define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
#define CMD_ISA_VERSION_HUNDRETH 0x03
#define CMD_ISA_VERSION_MINOR 0x04
#define CMD_ISA_SWITCH_SETTINGS 0x05
+#define CMD_ISA_RESET_PC 0x06
+#define CMD_ISA_ARM_0 0x07
+#define CMD_ISA_ARM_30 0x08
+#define CMD_ISA_ARM_60 0x09
#define CMD_ISA_DELAY_TIME_2SECS 0x0A
#define CMD_ISA_DELAY_TIME_4SECS 0x0B
#define CMD_ISA_DELAY_TIME_8SECS 0x0C
+#define CMD_ISA_RESET_RELAYS 0x0D
/*
* We are using an kernel timer to do the pinging of the watchdog
static char expect_close;
static int temp_panic;
static struct { /* this is private data for each ISA-PC watchdog card */
+ char fw_ver_str[6]; /* The cards firmware version */
int revision; /* The card's revision */
int supports_temp; /* Wether or not the card has a temperature device */
int command_mode; /* Wether or not the card is in command mode */
} pcwd_private;
/* module parameters */
+#define QUIET 0 /* Default */
+#define VERBOSE 1 /* Verbose */
+#define DEBUG 2 /* print fancy stuff too */
+static int debug = QUIET;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+
#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT;
module_param(heartbeat, int, 0);
int control_status;
int port0, last_port0; /* Double read for stabilising */
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "sending following data cmd=0x%02x\n",
+ cmd);
+
/* The WCMD bit must be 1 and the command is only 4 bits in size */
control_status = (cmd & 0x0F) | WD_WCMD;
outb_p(control_status, pcwd_private.io_addr + 2);
udelay (250);
}
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
+ cmd, port0, last_port0);
+
return port0;
}
spin_unlock(&pcwd_private.io_lock);
pcwd_private.command_mode = found;
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "command_mode=%d\n",
+ pcwd_private.command_mode);
+
return(found);
}
spin_unlock(&pcwd_private.io_lock);
pcwd_private.command_mode = 0;
+
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "command_mode=%d\n",
+ pcwd_private.command_mode);
+}
+
+static inline void pcwd_check_temperature_support(void)
+{
+ if (inb(pcwd_private.io_addr) != 0xF0)
+ pcwd_private.supports_temp = 1;
+}
+
+static inline void pcwd_get_firmware(void)
+{
+ int one, ten, hund, minor;
+
+ strcpy(pcwd_private.fw_ver_str, "ERROR");
+
+ if (set_command_mode()) {
+ one = send_isa_command(CMD_ISA_VERSION_INTEGER);
+ ten = send_isa_command(CMD_ISA_VERSION_TENTH);
+ hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
+ minor = send_isa_command(CMD_ISA_VERSION_MINOR);
+ sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor);
+ }
+ unset_command_mode();
+
+ return;
+}
+
+static inline int pcwd_get_option_switches(void)
+{
+ int option_switches=0;
+
+ if (set_command_mode()) {
+ /* Get switch settings */
+ option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
+ }
+
+ unset_command_mode();
+ return(option_switches);
+}
+
+static void pcwd_show_card_info(void)
+{
+ int option_switches;
+
+ /* Get some extra info from the hardware (in command/debug/diag mode) */
+ if (pcwd_private.revision == PCWD_REVISION_A)
+ printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
+ else if (pcwd_private.revision == PCWD_REVISION_C) {
+ pcwd_get_firmware();
+ printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
+ pcwd_private.io_addr, pcwd_private.fw_ver_str);
+ option_switches = pcwd_get_option_switches();
+ printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+ option_switches,
+ ((option_switches & 0x10) ? "ON" : "OFF"),
+ ((option_switches & 0x08) ? "ON" : "OFF"));
+
+ /* Reprogram internal heartbeat to 2 seconds */
+ if (set_command_mode()) {
+ send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
+ unset_command_mode();
+ }
+ }
+
+ if (pcwd_private.supports_temp)
+ printk(KERN_INFO PFX "Temperature Option Detected\n");
+
+ if (pcwd_private.boot_status & WDIOF_CARDRESET)
+ printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
+
+ if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
+ printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
+ printk(KERN_EMERG PFX "CPU Overheat\n");
+ }
+
+ if (pcwd_private.boot_status == 0)
+ printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
}
static void pcwd_timer_ping(unsigned long data)
return -EIO;
}
}
+
+ if (debug >= VERBOSE)
+ printk(KERN_DEBUG PFX "Watchdog started\n");
+
return 0;
}
return -EIO;
}
}
+
+ if (debug >= VERBOSE)
+ printk(KERN_DEBUG PFX "Watchdog stopped\n");
+
return 0;
}
{
/* user land ping */
pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
+
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n");
+
return 0;
}
return -EINVAL;
heartbeat = t;
+
+ if (debug >= VERBOSE)
+ printk(KERN_DEBUG PFX "New heartbeat: %d\n",
+ heartbeat);
+
return 0;
}
static int pcwd_get_status(int *status)
{
- int card_status;
+ int control_status;
*status=0;
spin_lock(&pcwd_private.io_lock);
/* Rev A cards return status information from
* the base register, which is used for the
* temperature in other cards. */
- card_status = inb(pcwd_private.io_addr);
+ control_status = inb(pcwd_private.io_addr);
else {
/* Rev C cards return card status in the base
* address + 1 register. And use different bits
* to indicate a card initiated reset, and an
* over-temperature condition. And the reboot
* status can be reset. */
- card_status = inb(pcwd_private.io_addr + 1);
+ control_status = inb(pcwd_private.io_addr + 1);
}
spin_unlock(&pcwd_private.io_lock);
if (pcwd_private.revision == PCWD_REVISION_A) {
- if (card_status & WD_WDRST)
+ if (control_status & WD_WDRST)
*status |= WDIOF_CARDRESET;
- if (card_status & WD_T110) {
+ if (control_status & WD_T110) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
printk (KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
+ /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
}
} else {
- if (card_status & WD_REVC_WTRP)
+ if (control_status & WD_REVC_WTRP)
*status |= WDIOF_CARDRESET;
- if (card_status & WD_REVC_TTRP) {
+ if (control_status & WD_REVC_TTRP) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
printk (KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
+ /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
}
}
static int pcwd_clear_status(void)
{
+ int control_status;
+
if (pcwd_private.revision == PCWD_REVISION_C) {
spin_lock(&pcwd_private.io_lock);
- outb_p(0x00, pcwd_private.io_addr + 1); /* clear reset status */
+
+ if (debug >= VERBOSE)
+ printk(KERN_INFO PFX "clearing watchdog trip status\n");
+
+ control_status = inb_p(pcwd_private.io_addr + 1);
+
+ if (debug >= DEBUG) {
+ printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status);
+ printk(KERN_DEBUG PFX "sending: 0x%02x\n",
+ (control_status & WD_REVC_R2DS));
+ }
+
+ /* clear reset status & Keep Relay 2 disable state as it is */
+ outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1);
+
spin_unlock(&pcwd_private.io_lock);
}
return 0;
*temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32;
spin_unlock(&pcwd_private.io_lock);
+ if (debug >= DEBUG) {
+ printk(KERN_DEBUG PFX "temperature is: %d F\n",
+ *temperature);
+ }
+
return 0;
}
switch(cmd) {
default:
- return -ENOIOCTLCMD;
+ return -ENOTTY;
case WDIOC_GETSUPPORT:
if(copy_to_user(argp, &ident, sizeof(ident)))
static int pcwd_open(struct inode *inode, struct file *file)
{
if (!atomic_dec_and_test(&open_allowed) ) {
+ if (debug >= VERBOSE)
+ printk(KERN_ERR PFX "Attempt to open already opened device.\n");
atomic_inc( &open_allowed );
return -EBUSY;
}
* Kernel Interfaces
*/
-static struct file_operations pcwd_fops = {
+static const struct file_operations pcwd_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = pcwd_write,
.fops = &pcwd_fops,
};
-static struct file_operations pcwd_temp_fops = {
+static const struct file_operations pcwd_temp_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = pcwd_temp_read,
* Init & exit routines
*/
-static inline void get_support(void)
-{
- if (inb(pcwd_private.io_addr) != 0xF0)
- pcwd_private.supports_temp = 1;
-}
-
static inline int get_revision(void)
{
int r = PCWD_REVISION_C;
return r;
}
-static inline char *get_firmware(void)
-{
- int one, ten, hund, minor;
- char *ret;
-
- ret = kmalloc(6, GFP_KERNEL);
- if(ret == NULL)
- return NULL;
-
- if (set_command_mode()) {
- one = send_isa_command(CMD_ISA_VERSION_INTEGER);
- ten = send_isa_command(CMD_ISA_VERSION_TENTH);
- hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
- minor = send_isa_command(CMD_ISA_VERSION_MINOR);
- sprintf(ret, "%c.%c%c%c", one, ten, hund, minor);
- }
- else
- sprintf(ret, "ERROR");
-
- unset_command_mode();
- return(ret);
-}
-
-static inline int get_option_switches(void)
-{
- int rv=0;
-
- if (set_command_mode()) {
- /* Get switch settings */
- rv = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
- }
-
- unset_command_mode();
- return(rv);
-}
-
static int __devinit pcwatchdog_init(int base_addr)
{
int ret;
- char *firmware;
- int option_switches;
cards_found++;
if (cards_found == 1)
pcwd_stop();
/* Check whether or not the card supports the temperature device */
- get_support();
-
- /* Get some extra info from the hardware (in command/debug/diag mode) */
- if (pcwd_private.revision == PCWD_REVISION_A)
- printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
- else if (pcwd_private.revision == PCWD_REVISION_C) {
- firmware = get_firmware();
- printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
- pcwd_private.io_addr, firmware);
- kfree(firmware);
- option_switches = get_option_switches();
- printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
- option_switches,
- ((option_switches & 0x10) ? "ON" : "OFF"),
- ((option_switches & 0x08) ? "ON" : "OFF"));
-
- /* Reprogram internal heartbeat to 2 seconds */
- if (set_command_mode()) {
- send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
- unset_command_mode();
- }
- } else {
- /* Should NEVER happen, unless get_revision() fails. */
- printk(KERN_INFO PFX "Unable to get revision\n");
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return -1;
- }
-
- if (pcwd_private.supports_temp)
- printk(KERN_INFO PFX "Temperature Option Detected\n");
+ pcwd_check_temperature_support();
- if (pcwd_private.boot_status & WDIOF_CARDRESET)
- printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
-
- if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
- printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
- printk(KERN_EMERG PFX "CPU Overheat\n");
- }
-
- if (pcwd_private.boot_status == 0)
- printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+ /* Show info about the card itself */
+ pcwd_show_card_info();
/* Check that the heartbeat value is within it's range ; if not reset to the default */
if (pcwd_set_heartbeat(heartbeat)) {
{
if (pcwd_private.io_addr)
pcwatchdog_exit();
- return;
+
+ printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}
module_init(pcwd_init_module);
projects / powerpc.git / blobdiff