* references to this document given in []
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include "edac_mc.h"
-#define R82600_REVISION " Ver: 2.0.0 " __DATE__
+#define R82600_REVISION " Ver: 2.0.1 " __DATE__
+#define EDAC_MOD_STR "r82600_edac"
#define r82600_printk(level, fmt, arg...) \
edac_printk(level, "r82600", fmt, ##arg)
r82600_process_error_info(mci, &info, 1);
}
-static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+static inline int ecc_enabled(u8 dramcr)
{
- int rc = -ENODEV;
+ return dramcr & BIT(5);
+}
+
+static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+ u8 dramcr)
+{
+ struct csrow_info *csrow;
int index;
- struct mem_ctl_info *mci = NULL;
+ u8 drbar; /* SDRAM Row Boundry Address Register */
+ u32 row_high_limit, row_high_limit_last;
+ u32 reg_sdram, ecc_on, row_base;
+
+ ecc_on = ecc_enabled(dramcr);
+ reg_sdram = dramcr & BIT(4);
+ row_high_limit_last = 0;
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = &mci->csrows[index];
+
+ /* find the DRAM Chip Select Base address and mask */
+ pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
+
+ debugf1("%s() Row=%d DRBA = %#0x\n", __func__, index, drbar);
+
+ row_high_limit = ((u32) drbar << 24);
+/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
+
+ debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n",
+ __func__, index, row_high_limit, row_high_limit_last);
+
+ /* Empty row [p.57] */
+ if (row_high_limit == row_high_limit_last)
+ continue;
+
+ row_base = row_high_limit_last;
+
+ csrow->first_page = row_base >> PAGE_SHIFT;
+ csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+ csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
+ /* Error address is top 19 bits - so granularity is *
+ * 14 bits */
+ csrow->grain = 1 << 14;
+ csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
+ /* FIXME - check that this is unknowable with this chipset */
+ csrow->dtype = DEV_UNKNOWN;
+
+ /* Mode is global on 82600 */
+ csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
+ row_high_limit_last = row_high_limit;
+ }
+}
+
+static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ struct mem_ctl_info *mci;
u8 dramcr;
- u32 ecc_on;
- u32 reg_sdram;
u32 eapr;
u32 scrub_disabled;
u32 sdram_refresh_rate;
- u32 row_high_limit_last = 0;
struct r82600_error_info discard;
debugf0("%s()\n", __func__);
pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
pci_read_config_dword(pdev, R82600_EAP, &eapr);
- ecc_on = dramcr & BIT(5);
- reg_sdram = dramcr & BIT(4);
scrub_disabled = eapr & BIT(31);
sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS);
- if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
- }
+ if (mci == NULL)
+ return -ENOMEM;
debugf0("%s(): mci = %p\n", __func__, mci);
mci->dev = &pdev->dev;
* is possible. */
mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
- if (ecc_on) {
+ if (ecc_enabled(dramcr)) {
if (scrub_disabled)
debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
"%#0x\n", __func__, mci, eapr);
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
-
- for (index = 0; index < mci->nr_csrows; index++) {
- struct csrow_info *csrow = &mci->csrows[index];
- u8 drbar; /* sDram Row Boundry Address Register */
- u32 row_high_limit;
- u32 row_base;
-
- /* find the DRAM Chip Select Base address and mask */
- pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
-
- debugf1("MC%d: %s() Row=%d DRBA = %#0x\n", mci->mc_idx,
- __func__, index, drbar);
-
- row_high_limit = ((u32) drbar << 24);
-/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
-
- debugf1("MC%d: %s() Row=%d, Boundry Address=%#0x, Last = "
- "%#0x \n", mci->mc_idx, __func__, index,
- row_high_limit, row_high_limit_last);
-
- /* Empty row [p.57] */
- if (row_high_limit == row_high_limit_last)
- continue;
-
- row_base = row_high_limit_last;
- csrow->first_page = row_base >> PAGE_SHIFT;
- csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
- csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
- /* Error address is top 19 bits - so granularity is *
- * 14 bits */
- csrow->grain = 1 << 14;
- csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
- /* FIXME - check that this is unknowable with this chipset */
- csrow->dtype = DEV_UNKNOWN;
-
- /* Mode is global on 82600 */
- csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
- row_high_limit_last = row_high_limit;
- }
-
+ r82600_init_csrows(mci, pdev, dramcr);
r82600_get_error_info(mci, &discard); /* clear counters */
- if (edac_mc_add_mc(mci)) {
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
+ */
+ if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
return 0;
fail:
- if (mci)
- edac_mc_free(mci);
-
- return rc;
+ edac_mc_free(mci);
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
projects / powerpc.git / blobdiff