will be called i2c-amd8111.
config I2C_AU1550
- tristate "Au1550 SMBus interface"
- depends on I2C && SOC_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on I2C && (SOC_AU1550 || SOC_AU1200)
help
If you say yes to this option, support will be included for the
- Au1550 SMBus interface.
+ Au1550 and Au1200 SMBus interface.
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
ICH7
ESB2
ICH8
+ ICH9
This driver can also be built as a module. If so, the module
will be called i2c-i801.
I2C bus.
config I2C_PIIX4
- tristate "Intel PIIX4"
+ tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the Intel
of Broadcom):
Intel PIIX4
Intel 440MX
+ ATI IXP200
+ ATI IXP300
+ ATI IXP400
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
will be called i2c-ibm_iic.
config I2C_IOP3XX
- tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
- depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+ tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
+ depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C
help
Say Y here if you want to use the IIC bus controller on
- the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
+ the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
will be called i2c-powermac.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx"
+ tristate "MPC107/824x/85xx/52xx/86xx"
depends on I2C && PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx family processors. The driver may also work on 52xx
+ MPC85xx/MPC8641 family processors. The driver may also work on 52xx
family processors, though interrupts are known not to work.
This driver can also be built as a module. If so, the module
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
+config I2C_OCORES
+ tristate "OpenCores I2C Controller"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ OpenCores I2C controller. For details see
+ http://www.opencores.org/projects.cgi/web/i2c/overview
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-ocores.
+
+config I2C_OMAP
+ tristate "OMAP I2C adapter"
+ depends on I2C && ARCH_OMAP
+ default y if MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes to this option, support will be included for the
+ I2C interface on the Texas Instruments OMAP1/2 family of processors.
+ Like OMAP1510/1610/1710/5912 and OMAP242x.
+ For details see http://www.ti.com/omap.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on I2C && PARPORT
This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This
- might be prefered on embedded systems where wasting memory for
+ might be preferred on embedded systems where wasting memory for
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
- dasiy-chain other parallel port devices.
+ daisy-chain other parallel port devices.
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
will be called i2c-via.
config I2C_VIAPRO
- tristate "VIA 82C596/82C686/823x"
+ tristate "VIA 82C596/82C686/82xx"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the VIA
- 82C596/82C686/823x I2C interfaces. Specifically, the following
+ 82C596/82C686/82xx I2C interfaces. Specifically, the following
chipsets are supported:
- 82C596A/B
- 82C686A/B
- 8231
- 8233
- 8233A
- 8235
- 8237
+ VT82C596A/B
+ VT82C686A/B
+ VT8231
+ VT8233/A
+ VT8235
+ VT8237R/A
+ VT8251
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
tristate "PCA9564 on an ISA bus"
depends on I2C
select I2C_ALGOPCA
+ default n
help
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
+ This device is almost undetectable and using this driver on a
+ system which doesn't have this device will result in long
+ delays when I2C/SMBus chip drivers are loaded (e.g. at boot
+ time). If unsure, say N.
+
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on I2C && MV64X60 && EXPERIMENTAL
projects / powerpc.git / blobdiff